evcc.dist.yaml

uri: 0.0.0.0:7070 # uri for ui
interval: 10s # control cycle interval

# log settings
log: error
levels:
  core: debug
  lp-1: debug
  lp-2: debug

# mqtt message broker
mqtt:
  broker: localhost:1883
  topic: evcc # root topic for publishing, set empty to disable
  # user:
  # password:

# influx database
influx:
  url: http://localhost:8086
  database: evcc
  # user:
  # password:

# additional menu entries
menu:
# - title: "Verlauf"
#   subtitle: "Bezugs- und Einspeiseleistung"
#   img: "http://..."
#   link: "http://..."
#   iframe: "http://..."

# push messages
messaging:
  events:
    start: # charge start event
      title: Charge started
      msg: Started charging in "${mode}" mode
    stop: # charge stop event
      title: Charge finished
      msg: Finished charging ${chargedEnergy:%.1fk}kWh in ${chargeDuration}.
    connect: # vehicle connect event
      title: Car connected
      msg: "Car connected at ${pvPower:%.1fk}kW PV"
    disconnect: # vehicle connected event
      title: Car disconnected
      msg: Car disconnected after ${connectedDuration}
  services:
  # - type: pushover
  #   app: # app id
  #   recipients:
  #   - # list of recipient ids
  # - type: telegram
  #   token: # bot id
  #   chats:
  #   - # list of chat ids
  # - type: email
  #   uri: smtp://<user>:<password>@<host>:<port>/?fromAddress=<from>&toAddresses=<to>

# meter definitions
# name can be freely chosen and is used as reference when assigning meters to site and loadpoints
meters:
- name: grid
  type: modbus
  model: sdm # SDM630
  uri: rs485.fritz.box:23
  rtu: true # rs485 device connected using ethernet adapter
  id: 2
  power: Power # default value, optionally override
  energy: Sum # default value, optionally override
- name: pv
  type: ... # examples see https://github.com/andig/evcc-config#meters
- name: battery
  type: ...
- name: charge

# charger definitions
# name can be freely chosen and is used as reference when assigning charger to vehicle
chargers:
- name: wallbe
  type: wallbe # Wallbe charger
  uri: 192.168.0.8:502 # ModBus address
- name: keba
  type: ... # https://github.com/andig/evcc-config#chargers

# vehicle definitions
# name can be freely chosen and is used as reference when assigning vehicle to loadpoint
vehicles:
- name: renault
  type: renault
  title: Zoe
  capacity: 60 # kWh
  user: # user
  password: # password
  region: de_DE # gigya region
  vin: WREN...
  cache: 5m
- name: default
  type: default
  title: Default
  capacity: 50 # kWh
  charge:
    type: script # use script
    cmd: /bin/sh -c "echo 50" # actual command
    timeout: 3s # kill script after 3 seconds
  cache: 5m
- name: bmw
  type: bmw
  title: i3
  capacity: 65 # kWh
  user: # user
  password: # password
  vin: WBMW...
  cache: 5m

# site describes the EVU connection, PV and home battery
site:
  title: Home # display name for UI
  meters:
    grid: grid # grid meter
    pv: pv # pv meter
    battery: battery # battery meter

# loadpoint describes the charger, charge meter and connected vehicle
loadpoints:
- title: Garage # display name for UI
  charger: wallbe # charger
  meters:
    charge: charge # charge meter
  vehicle: audi
  mode: pv
  targetSoC: 100 # charge to 100%
  soc:
    alwaysUpdate: false # set true to update vehicle soc even when disconnected
    levels: # target soc levels for UI
    - 30
    - 50
    - 80
    - 100
  onDisconnect: # set defaults when vehicle disconnects
    mode: pv # switch back to pv mode
    targetSoC: 100 # charge to 100%
  phases: 3 # ev phases (default 3)
  sensitivity: 1 # current raise/lower step size (default 10A)
  enable: # pv mode enable behavior
    delay: 1m # threshold must be exceeded for this long
    threshold: 0 # minimum export power (W). If zero, export must exceed minimum charge power to enable
  disable: # pv mode disable behavior
    delay: 5m # threshold must be exceeded for this long
    threshold: 200 # maximum import power (W)
  guardduration: 10m # switch charger contactor not more often than this (default 10m)
  mincurrent: 6 # minimum charge current (default 6A)
  maxcurrent: 16 # maximum charge current (default 16A)