Espressif IoT Development Framework. Official development framework for Espressif SoCs.

ZSWatch - the Open Source Zephyr™ based Smartwatch, including both HW and FW.

Arduino Audio Tools (a powerful Audio library not only for Arduino)

A simple NAT Router for the ESP32

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560

5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560

grblHAL core code and master Wiki

Software for The Original EggBot

This is a port of GRBL 1.1 to STM32F103 target

This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl

Code for the "Bare Metal Series" videos

grbl controller for esp32

Everything you need to build my Gateway ESP32 smartwatch project!

A library for VS1053 MP3 Codec Breakout adapted for Espressif ESP8266 and ESP32 boards.

Arm Mbed OS is a platform operating system designed for the internet of things

The source code of MKS DLC32

A CNC Pendant on ESP32 board, with LCD, WiFi and SD card

A DIY 40 LED rotating display with Arduino nano and ESP-01s microcontrollers

CNC controller running on the STM32F103 "Blue Pill" board, build and flash on Mac/Linux

A wireless GRBL CNC pendant project based on the ESP32 micro-controller

ATmega32-based amplifier control module with 32-band spectrum analyzer and FM radio support

PSoc5 Port of Grbl CNC Controller

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560

Marlin-based Laser Cutter/Engraver firmware for RepRap Hardware ( Marlin 1.0.0 )

University project: Simple micro-inverter using a STM32F103C8

The project was funded by IEEE PES with a view to design 1KW Pure Sine Wave Inverter. This was my first power electronics project using off-the-shelf components