Spotify TUI

A Spotify client for the terminal written in Rust.

The terminal in the demo above is using the Rigel theme.

• Spotify TUI
  • Installation
    • Homebrew
    • Snap
    • AUR
    • Nix
    • Void Linux
    • Fedora/CentOS
    • Cargo
      • Note on Linux
    • Windows
      • Scoop installer
    • Manual
  • Connecting to Spotify’s API
  • Usage
• Configuration
  • Limitations
  • Using with spotifyd
  • Libraries used
  • Development
    • Windows Subsystem for Linux
  • Contributors
  • Roadmap
    • High-level requirements yet to be implemented

Installation

The binary executable is spt.

Homebrew

For both macOS and Linux

brew install spotify-tui

To update, run

brew upgrade spotify-tui

Snap

For a system with Snap installed, run

snap install spt

The stable version will be installed for you automatically.

If you want to install the nightly build, run

snap install spt --edge

AUR

For those on Arch Linux you can find the package on AUR here. If however you're using an AUR helper you can install directly from that, for example (in the case of yay), run

yay -S spotify-tui

Nix

Available as the package spotify-tui. To install run:

nix-env -iA nixpkgs.spotify-tui

Where nixpkgs is the channel name in your configuration. For a more up-to-date installation, use the unstable channel. It is also possible to add the package to environment.systemPackages (for NixOS), or home.packages when using home-manager.

Void Linux

Available on the official repositories. To install, run

sudo xbps-install -Su spotify-tui

Fedora/CentOS

Available on the Copr repositories. To install, run

sudo dnf copr enable atim/spotify-tui -y && sudo dnf install spotify-tui

Cargo

Use this option if your architecture is not supported by the pre-built binaries found on the releases page.

First, install Rust (using the recommended rustup installation method) and then

cargo install spotify-tui

This method will build the binary from source.

To update, run

cargo install spotify-tui --force

Note on Linux

For compilation on Linux the development packages for libssl are required. For basic installation instructions, see install OpenSSL. In order to locate dependencies, the compilation also requires pkg-config to be installed.

If you are using the Windows Subsystem for Linux, you'll need to install additional dependencies.

Windows 10

Scoop installer

First, make sure scoop installer is on your windows box, for instruction please visit scoop.sh

Then open powershell and run following two commands:

scoop bucket add scoop-bucket https://github.com/Rigellute/scoop-bucket
scoop install spotify-tui

After that program is available as: spt or spt.exe

Manual

1. Download the latest binary for your OS.
2. cd to the file you just downloaded and unzip
3. cd to spotify-tui and run with ./spt

Connecting to Spotify’s API

spotify-tui needs to connect to Spotify’s API in order to find music by name, play tracks etc.

Instructions on how to set this up will be shown when you first run the app.

But here they are again:

1. Go to the Spotify dashboard
2. Click Create a Client ID and create an app
3. Now click Edit Settings
4. Add http://localhost:8888/callback to the Redirect URIs
5. You are now ready to authenticate with Spotify!
6. Go back to the terminal
7. Run spt
8. Enter your Client ID
9. Enter your Client Secret
10. You will be redirected to an official Spotify webpage to ask you for permissions.
11. After accepting the permissions, you'll be redirected to localhost. If all goes well, the redirect URL will be parsed automatically and now you're done. If the local webserver fails for some reason you'll be redirected to a blank webpage that might say something like "Connection Refused" since no server is running. Regardless, copy the URL and paste into the prompt in the terminal.

And now you are ready to use the spotify-tui 🎉

You can edit the config at anytime at ${HOME}/.config/spotify-tui/client.yml.

Usage

The binary is named spt.

When running spotify-tui press ? to bring up a help menu that shows currently implemented key events and their actions.

Configuration

A configuration file is located at ${HOME}/.config/spotify-tui/config.yml, for snap ${HOME}/snap/spt/current/.config/spotify-tui/config.yml (not to be confused with client.yml which handles spotify authentication)

The following is a sample config.yml file:

# Sample config file

# The theme colours can be an rgb string of the form "255, 255, 255" or a string that references the colours from your terminal theme: Reset, Black, Red, Green, Yellow, Blue, Magenta, Cyan, Gray, DarkGray, LightRed, LightGreen, LightYellow, LightBlue, LightMagenta, LightCyan, White.
theme:
  active: Cyan # current playing song in list
  banner: LightCyan # the "spotify-tui" banner on launch
  error_border: Red # error dialog border
  error_text: LightRed # error message text (e.g. "Spotify API reported error 404")
  hint: Yellow # hint text in errors
  hovered: Magenta # hovered pane border
  inactive: Gray # borders of inactive panes
  playbar_background: Black # background of progress bar
  playbar_progress: LightCyan # filled-in part of the progress bar
  playbar_text: White # artist name in player pane
  selected: LightCyan # a) selected pane border, b) hovered item in list, & c) track title in player
  text: "255, 255, 255" # text in panes
  header: White  # header text in panes (e.g. 'Title', 'Artist', etc.)

behavior:
  seek_milliseconds: 5000
  volume_increment: 10
  # The lower the number the higher the "frames per second". You can decrease this number so that the audio visualisation is smoother but this can be expensive!
  tick_rate_milliseconds: 250
  # Enable text emphasis (typically italic/bold text styling). Disabling this might be important if the terminal config is otherwise restricted and rendering text escapes interferes with the UI.
  enable_text_emphasis: true
  # controls whether to show a loading indicator in the top right of the UI whenever communicating with Spotify API
  show_loading_indicator: true

keybindings:
  # Key stroke can be used if it only uses two keys:
  # ctrl-q works,
  # ctrl-alt-q doesn't.
  back: "ctrl-q"

  jump_to_album: "a"

  # Shift modifiers use a capital letter (also applies with other modifier keys
  # like ctrl-A)
  jump_to_artist_album: "A"

  manage_devices: "d"
  decrease_volume: "-"
  increase_volume: "+"
  toggle_playback: " "
  seek_backwards: "<"
  seek_forwards: ">"
  next_track: "n"
  previous_track: "p"
  copy_song_url: "c"
  copy_album_url: "C"
  help: "?"
  shuffle: "s"
  repeat: "r"
  search: "/"
  audio_analysis: "v"
  jump_to_context: "o"
  basic_view: "B"
  add_item_to_queue: "z"

Limitations

This app uses the Web API from Spotify, which doesn't handle streaming itself. So you'll need either an official Spotify client open or a lighter weight alternative such as spotifyd.

If you want to play tracks, Spotify requires that you have a Premium account.

Using with spotifyd

Follow the spotifyd documentation to get set up.

After that there is not much to it.

1. Start running the spotifyd daemon.
2. Start up spt
3. Press d to go to the device selection menu and the spotifyd "device" should be there - if not check these docs

Libraries used

• tui-rs
• rspotify

Development

1. Install OpenSSL
2. Install Rust
3. Install xorg-dev (required for clipboard support)
4. Clone or fork this repo and cd to it
5. And then cargo run

Windows Subsystem for Linux

You might get a linking error. If so, you'll probably need to install additional dependencies required by the clipboard package

sudo apt-get install -y -qq pkg-config libssl-dev libxcb1-dev libxcb-render0-dev libxcb-shape0-dev libxcb-xfixes0-dev

Contributors

Thanks goes to these wonderful people (emoji key):

Alexander Keliris 💻 📖 🎨 📝 🤔 🚇 🚧 📦 👀	Mickael Marques 💵	Grzegorz Koperwas 📖	Austin Gassert 💻	Calen Robinette 💻	M*C*O 🚇	Andrew Chin 💻
Sam Naser 💻	Micha 💻	neriglissar 💻	Timon 💻	echoSayonara 💻	D-Nice 📖 🚇	Grzegorz Pawlik 💻
Lennart Bernhardt 💻	Arnaud Lefebvre 💻	tem1029 💻	Peter K. Moss 💻	Geoff Shannon 💻	Zachary Mayhew 💻	jfaltis 💻
Marcel Schramm 📖	Fangyi Zhou 💻	Max 💻	Sven van der Vlist 💻	jacobchrismarsh 💻	Nils Rauch 💻	Nick Stockton 💻 🐛 🚧 💬 📖
Stuart Hinson 💻	Sam Calvert 💻 📖	Jeroen Wijenbergh 📖	Kimberley Cook 📖	Audrey Baxter 💻	Norman 📖	Peter Maatman 💻
AlexandreS 💻	Finn Vos 💻	Carlos Hernandez 📦	Pedro Alves 💻	jtagcat 📖	Benjamin Kitor 💻	Aleš Najmann 📖 📦
Jeremy Stucki 💻	(´⌣`ʃƪ) 💻	Artem Polishchuk 📦	Chris Sosnin 💻	Ben Buhse 📖	Sean Li 💻	TimotheeGerber 💻 📖
Ferdinand Ratajczak 💻	Sheel Choksi 💻	Michael Hellwig 📖	Oliver Daniel 💻	Drew Fisher 💻	ncoder-1 📖	Macguire Rintoul 📖
Ricardo Holguin 💻	Keisuke Toyota 💻	Craig Astill 💻	Onielfa 💻	usrme 📖	Sergey A. 💻	Hideyuki Okada 💻
kepae 💻 📖	Érico Nogueira Rolim 💻	Alexander Meinhardt Scheurer 💻	Ondřej Kinšt 💻	Kryan90 📖	n-ivanov 💻	bi1yeu 💻 📖
May 💻

This project follows the all-contributors specification. Contributions of any kind welcome!

Roadmap

The goal is to eventually implement almost every Spotify feature.

High-level requirements yet to be implemented

• Add songs to a playlist
• Be able to scroll through result pages in every view

This table shows all that is possible with the Spotify API, what is implemented already, and whether that is essential.

API method	Implemented yet?	Explanation	Essential?
track	No	returns a single track given the track's ID, URI or URL	No
tracks	No	returns a list of tracks given a list of track IDs, URIs, or URLs	No
artist	No	returns a single artist given the artist's ID, URI or URL	Yes
artists	No	returns a list of artists given the artist IDs, URIs, or URLs	No
artist_albums	Yes	Get Spotify catalog information about an artist's albums	Yes
artist_top_tracks	Yes	Get Spotify catalog information about an artist's top 10 tracks by country.	Yes
artist_related_artists	Yes	Get Spotify catalog information about artists similar to an identified artist. Similarity is based on analysis of the Spotify community's listening history.	Yes
album	Yes	returns a single album given the album's ID, URIs or URL	Yes
albums	No	returns a list of albums given the album IDs, URIs, or URLs	No
search_album	Yes	Search album based on query	Yes
search_artist	Yes	Search artist based on query	Yes
search_track	Yes	Search track based on query	Yes
search_playlist	Yes	Search playlist based on query	Yes
album_track	Yes	Get Spotify catalog information about an album's tracks	Yes
user	No	Gets basic profile information about a Spotify User	No
playlist	Yes	Get full details about Spotify playlist	Yes
current_user_playlists	Yes	Get current user playlists without required getting his profile	Yes
user_playlists	No	Gets playlists of a user	No
user_playlist	No	Gets playlist of a user	No
user_playlist_tracks	Yes	Get full details of the tracks of a playlist owned by a user	Yes
user_playlist_create	No	Creates a playlist for a user	Yes
user_playlist_change_detail	No	Changes a playlist's name and/or public/private state	Yes
user_playlist_unfollow	Yes	Unfollows (deletes) a playlist for a user	Yes
user_playlist_add_track	No	Adds tracks to a playlist	Yes
user_playlist_replace_track	No	Replace all tracks in a playlist	No
user_playlist_recorder_tracks	No	Reorder tracks in a playlist	No
user_playlist_remove_all_occurrences_of_track	No	Removes all occurrences of the given tracks from the given playlist	No
user_playlist_remove_specific_occurrenes_of_track	No	Removes all occurrences of the given tracks from the given playlist	No
user_playlist_follow_playlist	Yes	Add the current authenticated user as a follower of a playlist.	Yes
user_playlist_check_follow	No	Check to see if the given users are following the given playlist	Yes
me	No	Get detailed profile information about the current user.	Yes
current_user	No	Alias for me	Yes
current_user_playing_track	Yes	Get information about the current users currently playing track.	Yes
current_user_saved_albums	Yes	Gets a list of the albums saved in the current authorized user's "Your Music" library	Yes
current_user_saved_tracks	Yes	Gets the user's saved tracks or "Liked Songs"	Yes
current_user_followed_artists	Yes	Gets a list of the artists followed by the current authorized user	Yes
current_user_saved_tracks_delete	Yes	Remove one or more tracks from the current user's "Your Music" library.	Yes
current_user_saved_tracks_contain	No	Check if one or more tracks is already saved in the current Spotify user’s “Your Music” library.	Yes
current_user_saved_tracks_add	Yes	Save one or more tracks to the current user's "Your Music" library.	Yes
current_user_top_artists	No	Get the current user's top artists	Yes
current_user_top_tracks	No	Get the current user's top tracks	Yes
current_user_recently_played	Yes	Get the current user's recently played tracks	Yes
current_user_saved_albums_add	Yes	Add one or more albums to the current user's "Your Music" library.	Yes
current_user_saved_albums_delete	Yes	Remove one or more albums from the current user's "Your Music" library.	Yes
user_follow_artists	Yes	Follow one or more artists	Yes
user_unfollow_artists	Yes	Unfollow one or more artists	Yes
user_follow_users	No	Follow one or more users	No
user_unfollow_users	No	Unfollow one or more users	No
featured_playlists	No	Get a list of Spotify featured playlists	Yes
new_releases	No	Get a list of new album releases featured in Spotify	Yes
categories	No	Get a list of categories used to tag items in Spotify	Yes
recommendations	Yes	Get Recommendations Based on Seeds	Yes
audio_features	No	Get audio features for a track	No
audios_features	No	Get Audio Features for Several Tracks	No
audio_analysis	Yes	Get Audio Analysis for a Track	Yes
device	Yes	Get a User’s Available Devices	Yes
current_playback	Yes	Get Information About The User’s Current Playback	Yes
current_playing	No	Get the User’s Currently Playing Track	No
transfer_playback	Yes	Transfer a User’s Playback	Yes
start_playback	Yes	Start/Resume a User’s Playback	Yes
pause_playback	Yes	Pause a User’s Playback	Yes
next_track	Yes	Skip User’s Playback To Next Track	Yes
previous_track	Yes	Skip User’s Playback To Previous Track	Yes
seek_track	Yes	Seek To Position In Currently Playing Track	Yes
repeat	Yes	Set Repeat Mode On User’s Playback	Yes
volume	Yes	Set Volume For User’s Playback	Yes
shuffle	Yes	Toggle Shuffle For User’s Playback	Yes