Name		Name	Last commit message	Last commit date
Latest commit History 63 Commits
build		build
driver		driver
res		res
screenshots		screenshots
.gitignore		.gitignore
README.md		README.md
analogconf_ui.py		analogconf_ui.py
axis_ui.py		axis_ui.py
base_ui.py		base_ui.py
buttonconf_ui.py		buttonconf_ui.py
config.py		config.py
dfu_ui.py		dfu_ui.py
encoderconf_ui.py		encoderconf_ui.py
errors.py		errors.py
ffb_ui.py		ffb_ui.py
helper.py		helper.py
install_requirements.bat		install_requirements.bat
libusb-1.0.dll		libusb-1.0.dll
main.py		main.py
midi_ui.py		midi_ui.py
optionsdialog.py		optionsdialog.py
pwmdriver_ui.py		pwmdriver_ui.py
pydfu.py		pydfu.py
requirements.txt		requirements.txt
run.bat		run.bat
serial_comms.py		serial_comms.py
serial_ui.py		serial_ui.py
system_ui.py		system_ui.py
tmc4671_ui.py		tmc4671_ui.py
tmcdebug_ui.py		tmcdebug_ui.py

Repository files navigation

OpenFFBoard-configurator

A simple GUI to configure the Open FFBoard written in Python 3 with Qt.

This allows complete configuration of all settings in the Open FFBoard firmware at runtime.

Requires the latest firmware version most of the time from a matching branch.

Be very careful when changing motor types, drivers or the power value.

Incorrect settings may cause unintended movements or damage hardware.

On older windows versions CDC drivers may not load automatically.

Then you need to manually install for example the STM VCP driver for the device. (We will provide an installer later)

Dependencies:

PyQt5 pyqtgraph (For TMC graph) pyusb and libusb-1.0.dll for DFU intelhex for uploading hex files