BOSH Acceptance Tests

The BOSH Acceptance Tests are meant to be used to verify the commonly used functionality of BOSH.

It requires a BOSH deployment, either a deployed micro bosh stemcell, or a full bosh-release deployment.

Note! If you run BAT via the rake tasks you don't need to setup environment variables below. See docs on how to run BATs using rake tasks.

Required Environment Variables

Before you can run BAT, you need to set the following environment variables:

• BAT_DIRECTOR - DNS name or IP address of the bosh director used for testing
• BAT_STEMCELL - path to the stemcell you want to use for testing
• BAT_DEPLOYMENT_SPEC - path to the bat yaml file which is used to generate the deployment manifest (see below bat.yml)
• BAT_VCAP_PASSWORD - password used to ssh to the stemcells
• BAT_DNS_HOST - DNS host or IP where BOSH-controlled PowerDNS server is running, which is required for the DNS tests. For example, if BAT is being run against a MicroBOSH then this value will be the same as BAT_DIRECTOR
• BOSH_KEY_PATH - the full path to the private key for ssh into the bosh instances
• BAT_INFRASTRUCTURE - the name of infrastructure that is used by bosh deployment. Examples: aws, vsphere, openstack, warden.
• BAT_NETWORKING - the type of networking being used: dynamic or manual.

The 'dns' property MUST NOT be specified in the bat deployment spec properties. At all.

bat.yml

Create bat.yml that is used by BATs to generate manifest. Set BAT_DEPLOYMENT_SPEC to point to bat.yml file path.

AWS

manual networking

---
cpi: aws
properties:
  uuid: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # BAT_DIRECTOR UUID
  stemcell:
    name: bosh-aws-xen-ubuntu
    version: latest
  pool_size: 1
  instances: 1
  vip: 54.54.54.54 # elastic ip for bat deployed VM
  second_static_ip: 10.10.0.31 # Secondary (private) IP to use for reconfiguring networks, must be in the primary network & different from static_ip
  networks:
  - name: default
    static_ip: 10.10.0.30
    cidr: 10.10.0.0/24
    reserved: ['10.10.0.2 - 10.10.0.9']
    static: ['10.10.0.10 - 10.10.0.31']
    gateway: 10.10.0.1
    subnet: subnet-xxxxxxxx # VPC subnet
    security_groups: 'bat' # VPC security groups
  key_name: bosh # (optional) SSH keypair name, overrides the director's default_key_name setting

Openstack

dynamic networking

---
cpi: openstack
properties:
  uuid: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # BAT_DIRECTOR UUID
  stemcell:
    name: bosh-openstack-kvm-ubuntu
    version: latest
  pool_size: 1
  instances: 1
  instance_type: some-ephemeral
  flavor_with_no_ephemeral_disk: no-ephemeral
  vip: 0.0.0.43 # Virtual (public/floating) IP assigned to the bat-release job vm ('static' network), for ssh testing
  networks:
  - name: default
    type: dynamic
    cloud_properties:
      net_id: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # Network ID
      security_groups: ['default'] # security groups assigned to deployed VMs
  key_name: bosh # (optional) SSH keypair name, overrides the director's default_key_name setting

manual networking

---
cpi: openstack
properties:
  uuid: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # BAT_DIRECTOR UUID
  stemcell:
    name: bosh-openstack-kvm-ubuntu
    version: latest
  pool_size: 1
  instances: 1
  flavor_with_no_ephemeral_disk: no-ephemeral
  vip: 0.0.0.43 # Virtual (public/floating) IP assigned to the bat-release job vm ('static' network), for ssh testing
  second_static_ip: 10.253.3.29 # Secondary (private) IP to use for reconfiguring networks, must be in the primary network & different from static_ip
  network:
  - name: default
    type: manual
    static_ip: 10.0.1.30 # Primary (private) IP assigned to the bat-release job vm (primary NIC), must be in the primary static range
    cloud_properties:
      net_id: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # Primary Network ID
      security_groups: ['default'] # Security groups assigned to deployed VMs
    cidr: 10.0.1.0/24
    reserved: ['10.0.1.2 - 10.0.1.9']
    static: ['10.0.1.10 - 10.0.1.30']
    gateway: 10.0.1.1
  - name: second # Secondary network for testing jobs with multiple manual networks
    type: manual
    static_ip: 192.168.0.30 # Secondary (private) IP assigned to the bat-release job vm (secondary NIC)
    cloud_properties:
      net_id: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # Secondary Network ID
      security_groups: ['default'] # Security groups assigned to deployed VMs
    cidr: 192.168.0.0/24
    reserved: ['192.168.0.2 - 192.168.0.9']
    static: ['192.168.0.10 - 192.168.0.30']
    gateway: 192.168.0.1
  key_name: bosh # (optional) SSH keypair name, overrides the director's default_key_name setting

vSphere

---
cpi: vsphere
properties:
  uuid: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx # BAT_DIRECTOR UUID
  stemcell:
    name: bosh-vsphere-esxi-ubuntu
    version: latest
  pool_size: 1
  instances: 1
  second_static_ip: 192.168.79.62 # Secondary (private) IP assigned to the bat-release job vm, used for testing network reconfiguration, must be in the primary network & different from static_ip
  network:
  - name: static
    type: manual
    static_ip: 192.168.79.61 # Primary (private) IP assigned to the bat-release job vm, must be in the static range
    cidr: 192.168.79.0/24
    reserved: ['192.168.79.2 - 192.168.79.50', '192.168.79.128 - 192.168.79.254'] # multiple reserved ranges are allowed but optional
    static: ['192.168.79.60 - 192.168.79.70']
    gateway: 192.168.79.1
    vlan: Network_Name # vSphere network name

EC2 Networking Config

On EC2 with AWS-provided DHCP networking

Add TCP port 4567 to the default security group.

On EC2 with VPC networking

Create a bat security group in the same VPC the BAT_DIRECTOR is running in. Allow inbound access to TCP ports 22 and 4567 to the bat security group.

OpenStack Setup

Flavors

Create the following flavors:

• m1.small
  • ephemeral disk > 6GB
  • root disk big enough for stemcell root partition (currently 3GB)
• no-ephemeral
  • ephemeral disk = 0
  • root disk big enough for stemcell root partition (currently 3GB), plus at least 1GB for ephemeral & swap partitions

Networking Config

Add TCP ports 22 and 4567 to the default security group.

Running BAT

When all of the above is ready, running bundle exec rake bat:env will verify environment variables are set correctly. To run the whole test suite, run bundle exec rake bat.