[REQUEST] Support for more popular environmental sensors in firmware for CC2530 based Sonoff BASICZBR3?

[Gamester17]

@kirovilya Any chance you be willing to add support for any more popular environmental sensors?

I guess that the most popular in demand in this specific case would be the sensors that ITead already sell for Sonoff TH10 / Sonoff TH16 so can buy them and Sonoff BASICZBR3 from same site.

• https://www.itead.cc/sonoff-th.html

ITead sells these as Sonoff branded sensors:

• Sonoff TH Sensor Si7021
  • https://sonoff.tech/product/accessories/si7021
• Sonoff TH Sensor AM2301
  • https://sonoff.tech/product/accessories/AM2301
• Sonoff Temp Sensor DS18B20
  • https://sonoff.tech/product/accessories/DS18B20

They sell this "SONOFF 5M Sensor Extension Cable" would could be cut of and made into an adapter:

• https://sonoff.tech/product/accessories/al560-sensor-extention-cable

Other popular low-cost sensors that support both humidity + temperature are DHT11, DHT12 & DHT22

• https://www.itead.cc/humidity-temperature-sensor-dht11.html
  • https://www.itead.cc/wiki/DHT11_Humidity_Temperature_Sensor_Brick
• https://www.itead.cc/humidity-temperature-sensor-dht22.html

They also sell several different versions of DS18B20

• https://www.itead.cc/waterproof-ds18b20-temperature-sensor.html
• https://www.itead.cc/temperature-sensor-with-steel-head-and-plastic-connector.html
• https://www.itead.cc/temperature-sensor-with-steel-head.html

@ptvoinfo Zigbee Configurable Firmware v2.3 for example now supports a lot of environmental sensors; DS18B20, BMP280, BME280, DHT11, DHT22, DHT12, AM2301, Sonoff SI7021, MHZ19, SenseAir S8 so not sure if he would be willing to share his code and input on it for CC2530?

• https://ptvo.info/zigbee-switch-configurable-firmware-v2-210/
  • https://ptvo.info/zigbee-switch-configurable-firmware-router-199/

[kirovilya]

My article and this repository are just an example of firmware implementation. If you understand, you can make your firmware to use these sensors.

As you correctly noticed, the @ptvoinfo configurator can make firmware for this device and other sensor. You can build the firmware yourself by correctly specifying the pins on which the button, LED and sensors are located.

[Gamester17]

If I understand yours is for Z-Stack 3.0 right and @ptvoinfo configurator is for Z-Stack Home 1.2 or?

https://habr.com/ru/company/iobroker/blog/495926/

Sorry I don't read Russian so had to use Google Translate, regardless, this code is beyond my skills.

[kirovilya]

:) This is normal, I also use Google Translate.
Yes, my version of Zigbee is 3.0, and the configurator is at 1.2
But this does not affect the operation of the device. You can use both options in different networks.