Neopixel not working with ver. 3.2.0

[forbidden-kiwi]

Board

ESP32-S3

Device Description

Tested on DF Robot Firebeetle 2 ESP32-S3 and XIAO ESP32-S3

Hardware Configuration

Just Neopixel Data Pin on an I/O Pin

Version

v3.2.0

IDE Name

Arduino IDE

Operating System

Windows 11

Flash frequency

80Mhz

PSRAM enabled

no

Upload speed

921600

Description

I can't control my Neopixel (WS2812), no matter what GPIO I use. Problem with ver. 3.2.0. I had to downgrade to ver.3.1.3 in order to get it back to work.

Sketch

Adafruit Neopixel standtest of FastLED Test Sketch

Debug Message

-

Other Steps to Reproduce

No response

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

[lbernstone]

We do not support 3rd party libraries here. Please test with https://github.com/espressif/arduino-esp32/blob/master/libraries/ESP32/examples/RMT/RMTWrite_RGB_LED/RMTWrite_RGB_LED.ino

[SuGlider]

About the libraries:

Adafruit Neopixel works with Arduino Core 3.2.0
FastLED still doesn't work with Arduino Core 3.2.0

ESP32 Arduino project doesn't maintain any of those 2 libraries.
Please refer to their Github Issues page.

About the boards:

• https://wiki.dfrobot.com/SKU_DFR0975_FireBeetle_2_Board_ESP32_S3
  Select Arduino Menu Board "DFRobot Firebeetle 2 ESP32-S3"
  it has no onboard RGB LED.
  IO21 is used as a regular LED.

• https://wiki.seeedstudio.com/xiao_esp32s3_getting_started/
  Select Arduino Menu Board "XIAO_ESP32S3"
  it has no onboard RGB LED.
  IO21 is used as a regular LED.

None of the boards has onboard Color WS2811 LED.