platformio.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:m5stack-cardputer]
platform = https://github.com/bmorcelli/platform-espressif32/releases/download/0.0.4/platform-espressif32.zip
board = m5stack-stamps3
framework = arduino
board_build.partitions = custom_8Mb.csv
build_src_filter =${env.build_src_filter} +<../ports/m5stack-cardputer>
build_flags =
	${env.build_flags}
	-Iports/m5stack-cardputer
	-DCORE_DEBUG_LEVEL=5
	-DARDUINO_USB_CDC_ON_BOOT=1

	-DCARDPUTER=1

	;Features Enabled
	;-DLITE_VERSION=1 ;limits some features to save space for M5Launcher Compatibility
	;Microphone
	-DMIC_SPM1423=1 ;uncomment to enable Applicable for SPM1423 device
	-DPIN_CLK=43
	-DI2S_SCLK_PIN=43
	-DI2S_DATA_PIN=46
	-DPIN_DATA=46

	;FM Radio
	-DFM_SI4713=1 ;Uncomment to activate FM Radio using Adafruit Si4713
	-DFM_RSTPIN=40

	;RGB LED runned by xylopyrographer/LiteLED@^1.2.0 library
	-DHAS_RGB_LED=1
	-DRGB_LED=21

	;Speaker to run music, compatible with NS4168
	-DHAS_NS4168_SPKR=1 ;uncomment to enable
	-DBCLK=41
	-DWCLK=43
	-DDOUT=42
	-DMCLK=43 # Microphone CLK or WCLK

	;Can run USB as HID
	-DUSB_as_HID=1

	;Buttons configuration
	-DHAS_BTN=0
	-DBTN_ALIAS='"Ok"'
	-DBTN_PIN=0
	-DBTN_ACT=LOw

	;Font sizes, depending on device
	-DFP=1
	-DFM=2
	-DFG=3

	;-DALLOW_ALL_GPIO_FOR_IR_RF=1 ; Set this option to make use of all GPIOs, from 1 to 44 to be chosen, except TFT and SD pins

	;Infrared Led default pin and state
	-DIR_TX_PINS='{ {"Default", LED}, {"M5 IR Mod", GROVE_SDA}, {"Groove W", GROVE_SCL}, {"GROVE Y", GROVE_SDA}}'
	-DIR_RX_PINS='{ {"M5 IR Mod", GROVE_SCL}, {"Groove W", GROVE_SCL}, {"GROVE Y", GROVE_SDA}}'
	-DLED=44
	-DLED_ON=HIGH
	-DLED_OFF=LOW

	;Radio Frequency (one pin modules) pin setting
	-DRF_TX_PINS='{ {"M5 RF433T", GROVE_SDA}, {"Groove W", GROVE_SCL}, {"GROVE Y", GROVE_SDA}}'
	-DRF_RX_PINS='{ {"M5 RF433R", GROVE_SCL}, {"Groove W", GROVE_SCL}, {"GROVE Y", GROVE_SDA}}'
	; connection pins using microSD sniffer module https://www.sparkfun.com/products/9419 https://docs.m5stack.com/en/core/Cardputer
	-DUSE_CC1101_VIA_SPI
	-DCC1101_GDO0_PIN=GROVE_SDA
	-DCC1101_SS_PIN=SPI_SS_PIN
	-DCC1101_MOSI_PIN=SPI_MOSI_PIN
	-DCC1101_SCK_PIN=SPI_SCK_PIN
	-DCC1101_MISO_PIN=SPI_MISO_PIN
	;-DCC1101_GDO2_PIN=-1

	; connections are the same as CC1101
	-DUSE_NRF24_VIA_SPI
	-DNRF24_CE_PIN=GROVE_SDA
	-DNRF24_SS_PIN=SPI_SS_PIN
	-DNRF24_MOSI_PIN=SPI_MOSI_PIN
	-DNRF24_SCK_PIN=SPI_SCK_PIN
	-DNRF24_MISO_PIN=SPI_MISO_PIN

	;Screen Setup
	-DHAS_SCREEN=1
	-DROTATION=1
	-DWIDTH=240
	-DHEIGHT=135
	-DBACKLIGHT=38
	-DMINBRIGHT=160

	;TFT_eSPI Setup
	-DUSER_SETUP_LOADED=1
	-DUSE_HSPI_PORT=1
	-DST7789_2_DRIVER=1
	-DTFT_RGB_ORDER=1
	-DTFT_WIDTH=135
	-DTFT_HEIGHT=240
	-DTFT_BACKLIGHT_ON=1
	-DTFT_BL=38
	-DTFT_RST=33
	-DTFT_DC=34
	-DTFT_MOSI=35
	-DTFT_SCLK=36
	-DTFT_CS=37
	-DTOUCH_CS=-1
	-DSMOOTH_FONT=1
	-DSPI_FREQUENCY=20000000
	-DSPI_READ_FREQUENCY=20000000
	-DSPI_TOUCH_FREQUENCY=2500000

	;SD Card Setup pins
	-DSDCARD_CS=12
	-DSDCARD_SCK=40
	-DSDCARD_MISO=39
	-DSDCARD_MOSI=14

	;Default I2C port
	-DGROVE_SDA=2
	-DGROVE_SCL=1

	;Default SPI port
	-DSPI_SCK_PIN=40
	-DSPI_MOSI_PIN=14
	-DSPI_MISO_PIN=39
	-DSPI_SS_PIN=GROVE_SCL

lib_deps =
	${env.lib_deps}
	xylopyrographer/LiteLED@^1.2.0