不知为何自动关机 #63
Comments
|
经过实验，发现具体现象：2.4G中继+无线，一会儿自动关机、5G中继+2.4G无线，正常，重启正常、5G中继+2.4G无线+5G无线，正常，但是重启后关机，进后台开关5G无线后能用，但是重启后还是关机 |
|
我也遇到了类似情况，不过只发生在2.4G频段，且与部分小米家居的智能设备有关. 补充： 型号是RA81 |
|
我试过了降低发射功率，但是过一段时间还是会自动关机，5G中继的话久了也会自动关机，但是一重启很快就会关机，我感觉可能是固件哪里的问题。 |
|
我也在继续尝试，似乎还是会不太稳定. 有点难定位原因. |
|
|
论坛https://www.right.com.cn/forum/forum.php |
|
可能是oom？但这个一般不会导致重启。高通平台异常崩溃会走特殊流程，可能确实会导致无法启动。 以及中继我确实没测试过 |
|
应该不是，我观察过，内存占用一直很正常，nwrt的固件上试过爆内存，也只会卡住而不会关机 |
|
遇到了同样情况 |
|
我也有这个情况 |
|
实测有相同问题 I also encountered the same problem Kernel Log[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.164 (runner@fv-az1250-571) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 ci-20240718-141758-e4a6dd47)) #0 SMP PREEMPT Mon Apr 17 13:15:36 2023 [ 0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Redmi AX3000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 49152 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 49152 pages, LIFO batch:15 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] percpu: Embedded 15 pages/cpu s32204 r8192 d21044 u61440 [ 0.000000] pcpu-alloc: s32204 r8192 d21044 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 48576 [ 0.000000] Kernel command line: ubi.mtd=rootfs_1 root=mtd:ubi_rootfs rootfstype=squashfs cnss2.bdf_integrated=0x24 cnss2.bdf_pci0=0x60 cnss2.bdf_pci1=0x60 cnss2.skip_radio_bmap=4 rootwait uart_en=1 root=/dev/ubiblock0_1 coherent_pool=2M [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 183392K/196608K available (6900K kernel code, 264K rwdata, 2092K rodata, 1024K init, 363K bss, 13216K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] GICv2m: range[mem 0x0b00b000-0x0b00bffc], SPI[480:511] [ 0.000000] random: get_random_bytes called from start_kernel+0x344/0x4f4 with crng_init=0 [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000018] Switching to timer-based delay loop, resolution 41ns [ 0.000416] Console: colour dummy device 80x30 [ 0.000907] printk: console [tty0] enabled [ 0.000945] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000980] pid_max: default: 32768 minimum: 301 [ 0.001141] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001175] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002080] CPU: Testing write buffer coherency: ok [ 0.002532] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003386] Setting up static identity map for 0x41300000 - 0x41300060 [ 0.003595] rcu: Hierarchical SRCU implementation. [ 0.004108] smp: Bringing up secondary CPUs ... [ 0.005145] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005330] smp: Brought up 1 node, 2 CPUs [ 0.005378] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.005398] CPU: All CPU(s) started in SVC mode. [ 0.013957] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4 [ 0.014404] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.014461] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.014635] pinctrl core: initialized pinctrl subsystem [ 0.015785] NET: Registered protocol family 16 [ 0.017359] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.018636] cpuidle: using governor ladder [ 0.018713] cpuidle: using governor menu [ 0.018962] NET: Registered protocol family 42 [ 0.019399] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.019434] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.061079] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider [ 0.075306] msm_sps_probe: sps:sps is ready [ 0.103770] pps_core: LinuxPPS API ver. 1 registered [ 0.103803] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.103847] PTP clock support registered [ 0.104692] Advanced Linux Sound Architecture Driver Initialized. [ 0.104813] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.106112] clocksource: Switched to clocksource arch_sys_counter [ 0.110829] thermal_sys: Registered thermal governor 'step_wise' [ 0.110838] thermal_sys: Registered thermal governor 'user_space' [ 0.111885] NET: Registered protocol family 2 [ 0.112059] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.112892] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.112961] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.113016] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.113073] TCP: Hash tables configured (established 2048 bind 2048) [ 0.113200] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.113247] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.113515] NET: Registered protocol family 1 [ 0.113569] PCI: CLS 0 bytes, default 64 [ 0.115100] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 0.120710] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.120746] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.156819] Key type asymmetric registered [ 0.156866] Asymmetric key parser 'x509' registered [ 0.156947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.159129] bam-dma-engine 704000.dma: num-channels unspecified in dt [ 0.159167] bam-dma-engine 704000.dma: num-ees unspecified in dt [ 0.159960] bam-dma-engine 7884000.dma: qcom,controlled-remotely unspecified [ 0.160934] bam-dma-engine 7984000.dma: qcom,controlled-remotely unspecified [ 0.162786] CPU: IPQ5000, SoC Version: 1.1 [ 0.163510] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set [ 0.164712] msm_serial 78af000.serial: msm_serial: detected port #0 [ 0.164781] msm_serial 78af000.serial: uartclk = 1843199 [ 0.164873] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 29, base_baud = 115199) is a MSM [ 0.164923] msm_serial: console setup on port #0 [ 0.766889] printk: console [ttyMSM0] enabled [ 0.771878] msm_serial: driver initialized [ 0.776402] random: fast init done [ 0.779904] random: crng init done [ 0.787011] brd: module loaded [ 0.791609] loop: module loaded [ 0.793744] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x41 [ 0.793792] nand: ESMT GD5F1GQ5REYIG SPI NAND 1G [ 0.800205] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [ 0.804784] qcom-nandc 79b0000.qpic-nand: cfg0 996c08d0 cfg1 8287140 ecc_buf_cfg 203 ecc_bch cfg 42040d10 cw_size 532 cw_data 516 strength 8 parity_bytes 16 steps 4 [ 0.812343] qcom-nandc 79b0000.qpic-nand: x4 mode enabled already remotely [ 0.827172] qcom-nandc 79b0000.qpic-nand: Serial training partition not found [ 0.833758] qcom-nandc 79b0000.qpic-nand: failed to enable serial training [ 0.841108] 22 fixed-partitions partitions found on MTD device qcom_nand.0 [ 0.847766] Creating 22 MTD partitions on "qcom_nand.0": [ 0.854591] 0x000000000000-0x000000080000 : "0:SBL1" [ 0.861430] 0x000000080000-0x000000100000 : "0:MIBIB" [ 0.866403] 0x000000100000-0x000000140000 : "0:BOOTCONFIG" [ 0.871004] 0x000000140000-0x000000180000 : "0:BOOTCONFIG1" [ 0.876490] 0x000000180000-0x000000280000 : "0:QSEE" [ 0.882596] 0x000000280000-0x000000380000 : "0:QSEE_1" [ 0.887833] 0x000000380000-0x0000003c0000 : "0:DEVCFG" [ 0.892137] 0x0000003c0000-0x000000400000 : "0:DEVCFG_1" [ 0.897245] 0x000000400000-0x000000440000 : "0:CDT" [ 0.902627] 0x000000440000-0x000000480000 : "0:CDT_1" [ 0.907336] 0x000000480000-0x000000500000 : "0:APPSBLENV" [ 0.912676] 0x000000500000-0x000000640000 : "0:APPSBL" [ 0.918858] 0x000000640000-0x000000780000 : "0:APPSBL_1" [ 0.923761] 0x000000780000-0x000000880000 : "0:ART" [ 0.929093] 0x000000880000-0x000000900000 : "0:TRAINING" [ 0.933158] 0x000000900000-0x000000980000 : "bdata" [ 0.938869] 0x000000980000-0x000000a00000 : "crash" [ 0.943340] 0x000000a00000-0x000000a80000 : "crash_syslog" [ 0.948273] 0x000000a80000-0x000002e80000 : "rootfs" [ 0.984596] mtd: device 18 (rootfs) set to be root filesystem [ 0.984911] mtdsplit: no squashfs found in "rootfs" [ 0.989431] 0x000002e80000-0x000005280000 : "rootfs_1" [ 1.026355] 0x000005280000-0x000007180000 : "overlay" [ 1.054597] 0x000007180000-0x000007200000 : "rsvd0" [ 1.057337] libphy: Fixed MDIO Bus: probed [ 1.272010] qca-mdio 88000.mdio: Could not find phy-reset-gpio [ 1.272229] libphy: qca_mdio: probed [ 1.277494] qca-mdio 88000.mdio: qca-mdio driver was registered [ 1.720969] qca-mdio 90000.mdio: Could not find phy-reset-gpio [ 1.721178] libphy: qca_mdio: probed [ 1.728381] qca-mdio 90000.mdio: qca-mdio driver was registered [ 1.836433] i2c /dev entries driver [ 1.837295] qcom-tsens 4a9000.thermal-sensor: tsens device is not enabled [ 1.840489] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz [ 1.845767] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 800000 KHz [ 1.854523] sdhci: Secure Digital Host Controller Interface driver [ 1.861546] sdhci: Copyright(c) Pierre Ossman [ 1.867483] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.872313] [ 1.872313] Version Rollback Feature Disabled [ 1.879872] remoteproc remoteproc0: cd00000.remoteproc is available [ 1.884246] remoteproc remoteproc1: 4ab000.remoteproc_pd1 is available [ 1.890436] remoteproc remoteproc2: cd00000.remoteproc:remoteproc_pd2 is available [ 1.896594] coresight-tmc 6048000.tmc: No Q6 ETR memory region specified [ 1.903705] coresight-tmc 6047000.tmc: failed to get flush cti, defer probe [ 1.910693] coresight-dynamic-funnel 6041000.funnel: Uses obsolete Coresight DT bindings [ 1.919596] coresight coresight-etm0: CPU0: ETM v4.0 initialized [ 1.925463] coresight-etm4x 619c000.etm: CPU0: (null) initialized [ 1.931980] coresight coresight-etm1: CPU1: ETM v4.0 initialized [ 1.937489] coresight-etm4x 619d000.etm: CPU1: (null) initialized [ 1.943760] coresight-stm 6002000.stm: coresight-stm : stm_register_device failed, probing deferred [ 1.949741] OF: graph: no port node found in /soc/cti@6010000 [ 1.958700] OF: graph: no port node found in /soc/cti@6011000 [ 1.964506] OF: graph: no port node found in /soc/cti@6012000 [ 1.970289] OF: graph: no port node found in /soc/cti@6013000 [ 1.975979] OF: graph: no port node found in /soc/cti@6014000 [ 1.981750] OF: graph: no port node found in /soc/cti@6015000 [ 1.987480] OF: graph: no port node found in /soc/cti@6016000 [ 1.993159] OF: graph: no port node found in /soc/cti@6017000 [ 1.998916] OF: graph: no port node found in /soc/cti@6018000 [ 2.004608] OF: graph: no port node found in /soc/cti@6019000 [ 2.010421] OF: graph: no port node found in /soc/cti@601a000 [ 2.016060] OF: graph: no port node found in /soc/cti@601b000 [ 2.021864] OF: graph: no port node found in /soc/cti@601c000 [ 2.027595] OF: graph: no port node found in /soc/cti@601d000 [ 2.033247] OF: graph: no port node found in /soc/cti@601e000 [ 2.039043] OF: graph: no port node found in /soc/cti@601f000 [ 2.044715] OF: graph: no port node found in /soc/cti@6198000 [ 2.050511] OF: graph: no port node found in /soc/cti@6199000 [ 2.056244] OF: graph: no port node found in /soc/cti@610c000 [ 2.062938] OF: graph: no port node found in /soc/hwevent@6101000 [ 2.067448] coresight-hwevent 6101000.hwevent: No csr data [ 2.073797] OF: graph: no port node found in /soc/csr@6001000 [ 2.079033] coresight-csr 6001000.csr: CSR initialized: coresight-csr [ 2.086800] NET: Registered protocol family 10 [ 2.092154] Segment Routing with IPv6 [ 2.095482] NET: Registered protocol family 17 [ 2.099350] Bridge firewalling registered [ 2.103487] 8021q: 802.1Q VLAN Support v1.8 [ 2.107878] Registering SWP/SWPB emulation handler [ 2.124907] coresight-tmc 6048000.tmc: No Q6 ETR memory region specified [ 2.125093] sps_register_bam_device: sps:BAM 0x06064000 is registered [ 2.131927] coresight coresight-stm: STM32 initialized [ 2.137464] ubi0: attaching mtd19 [ 2.286465] ubi0: scanning is finished [ 2.292261] ubi0: attached mtd19 (name "rootfs_1", size 36 MiB) [ 2.292304] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.297055] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.303935] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.310819] ubi0: good PEBs: 288, bad PEBs: 0, corrupted PEBs: 0 [ 2.317580] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 2.323814] ubi0: max/mean erase counter: 12/4, WL threshold: 4096, image sequence number: 1681737336 [ 2.330868] ubi0: available PEBs: 20, total reserved PEBs: 268, PEBs reserved for bad PEB handling: 20 [ 2.340206] ubi0: background thread "ubi_bgt0d" started, PID 84 [ 2.350137] block ubiblock0_1: created from ubi0:1(rootfs) [ 2.355161] hctosys: unable to open rtc device (rtc0) [ 2.361349] ALSA device list: [ 2.365822] No soundcards found. [ 2.372351] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 2.373566] Freeing unused kernel memory: 1024K [ 2.406376] Run /sbin/init as init process [ 2.630352] init: Console is alive [ 2.630612] init: - watchdog - [ 3.240748] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 3.295006] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.298336] init: - preinit - [ 8.025097] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 8.025364] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 164 [ 8.056646] UBIFS (ubi0:2): recovery needed [ 8.157242] UBIFS (ubi0:2): recovery completed [ 8.157412] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 8.160596] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 8.168598] UBIFS (ubi0:2): FS size: 18411520 bytes (17 MiB, 145 LEBs), journal size 1015809 bytes (0 MiB, 7 LEBs) [ 8.178426] UBIFS (ubi0:2): reserved for root: 869621 bytes (849 KiB) [ 8.188646] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 9E034A9C-A97A-4283-B6F7-F5B0B9B55666, small LPT model [ 8.198781] mount_root: switching to ubifs overlay [ 8.214981] urandom-seed: Seeding with /etc/urandom.seed [ 8.272998] procd: - early - [ 8.273130] procd: - watchdog - [ 8.863260] procd: - watchdog - [ 8.865248] procd: - ubus - [ 8.920671] procd: - init - [ 9.295053] urngd: v1.0.2 started. [ 9.316065] kmodloader: loading kernel modules from /etc/modules.d/* [ 9.368650] ssdk_switch_device_num_init[1210]:INFO:ess-switch dts node number: 2 [ 9.368726] ssdk_dt_get_switch_node[1015]:INFO:ess-switch DT exist! [ 9.375118] ssdk_dt_parse_access_mode[901]:INFO:switch_access_mode: local bus [ 9.381372] ssdk_dt_parse_access_mode[914]:INFO:switchreg_base_addr: 0x39c00000 [ 9.388442] ssdk_dt_parse_access_mode[915]:INFO:switchreg_size: 0x200000 [ 9.395517] ssdk_dt_parse_mac_mode[304]:INFO:mac mode = 0xf [ 9.402488] ssdk_dt_parse_mac_mode[310]:INFO:mac mode1 doesn't exit! [ 9.407774] ssdk_dt_parse_mac_mode[319]:INFO:mac mode2 doesn't exit! [ 9.414391] ssdk_dt_parse_port_bmp[802]:INFO:port_bmp doesn't exist! [ 9.420735] ssdk_dt_parse_uniphy[341]:INFO:ess-uniphy DT exist! [ 9.427054] ssdk_dt_parse_led[988]:INFO:current dts led_source_num is 0 [ 9.432682] ssdk_plat_init start [ 12.006132] ssdk_mp_reset_init[812]:INFO:MP reset successfully! [ 12.006208] ssdk_gcc_clock_init[1206]:INFO:SSDK gcc clock init successfully! [ 12.012122] mpge_phy_api_ops_init[1089]:INFO:qca probe mpge phy driver succeeded! [ 12.018627] mpge_phy_dac_set[917]:INFO:phy mdac is set as 0x10 [ 12.025576] mpge_phy_dac_set[929]:INFO:phy edac is set as 0x10 [ 12.031336] regi_init[3788]:INFO:Initializing SCOMPHY! [ 13.200157] _adpt_mp_uniphy_clk_output_ctrl_set[236]:INFO:uniphy will output clock as 25000000Hz [ 13.200297] ssdk_switch_register[1862]:INFO:Chip version 0xee [ 13.208077] qca_link_polling_select[1370]:INFO:link-polling-required node does not exist [ 13.213656] ssdk_switch_register[1896]:INFO:polling is selected [ 13.221835] regi_init[3798]:INFO:Initializing SCOMPHY Done!! [ 13.227497] ssdk_dt_get_switch_node[1015]:INFO:ess-switch DT exist! [ 13.233360] ssdk_dt_parse_access_mode[901]:INFO:switch_access_mode: mdio [ 13.239365] ssdk_dt_parse_mac_mode[301]:INFO:mac mode doesn't exit! [ 13.246509] ssdk_dt_parse_mac_mode[310]:INFO:mac mode1 doesn't exit! [ 13.252363] ssdk_dt_parse_mac_mode[319]:INFO:mac mode2 doesn't exit! [ 13.258951] ssdk_dt_parse[1112]:INFO:switch node is qca83xx! [ 13.265210] ssdk_plat_init start [ 13.335284] f1_phy_api_ops_init[1603]:INFO:qca probe f1 phy driver succeeded! [ 13.335323] regi_init[3737]:INFO:Initializing ISISC!! [ 13.341436] OF: /soc/ess-instance/ess-switch1@1: could not get #gpio-cells for /soc/phy@86000 [ 13.346466] qca_ar8327_gpio_reset[3663]:ERROR:gpio26 request failed, ret:-517 [ 13.355101] ssdk_switch_register[1870]:INFO:Chip version 0x1302 [ 13.362110] qca_link_polling_select[1370]:INFO:link-polling-required node does not exist [ 13.367867] ssdk_switch_register[1896]:INFO:polling is selected [ 15.086124] regi_init[3742]:INFO:Initializing ISISC Done!! [ 15.086244] regi_init[3824]:INFO:qca-ssdk module init succeeded! [ 15.094864] (unnamed net_device) (uninitialized): nss_dp_gmac: Registering netdev eth%d(qcom-id:1) with GMAC, mac_base: 0x90be0000 [ 15.100589] (unnamed net_device) (uninitialized): nss_dp_gmac: Registering netdev eth%d(qcom-id:2) with GMAC, mac_base: 0x90f20000 [ 15.110815] ********************************************************** [ 15.120064] * NSS Data Plane driver [ 15.129092] ********************************************************** [ 15.275231] nss_driver - fw of size 781856 bytes copied to load addr: 40000000, nss_id : 0 [ 15.277378] Supported Frequencies - [ 15.277386] 850 MHz [ 15.282416] 1 GHz [ 15.286274] [ 15.290350] 7f0e5e40: set sdma 8e93e000 [ 15.292341] node size 2 # items 4 [ 15.295436] memory: 40000000 268435456 (avl 198524928) items 4 active_cores 1 [ 15.299082] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000 [ 15.306030] 7f0e5e40: NSS core 0 DDR from 40000000 to 40800000 [ 15.313018] 7f0e5e40: meminfo init succeed [ 15.321400] gre: GRE over IPv4 demultiplexor driver [ 15.324111] ip_gre: GRE over IPv4 tunneling driver [ 15.336762] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 15.349942] node size 2 # items 4 [ 15.350001] memory: 40000000 268435456 (avl 198524928) items 4 active_cores 1 [ 15.352257] addr/size storage words 2 2 # words 4 in DTS, ddr size 800000 [ 15.354770] PPP generic driver version 2.4.2 [ 15.359456] 7f0e5e40: nss core 0 booted successfully [ 15.371665] NET: Registered protocol family 24 [ 15.384747] nss_wifi_meshmgr_init_module[1997]:Module Build Id: 07/18/24, 15:29:39 loaded [ 15.388254] Loading modules backported from Linux version e4a6dd4 [ 15.391934] Backport generated by backports.git e4a6dd4 [ 15.410252] PPTP driver version 0.8.5 [ 15.432567] xt_time: kernel timezone is -0000 [ 15.627035] ath11k c000000.wifi: ipq5018 hw1.0 [ 15.627666] remoteproc remoteproc1: powering up 4ab000.remoteproc_pd1 [ 15.677803] remoteproc remoteproc1: Booting fw image IPQ5018/q6_fw.mdt, size 1820 [ 15.677998] remoteproc remoteproc0: powering up cd00000.remoteproc [ 15.684391] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1820 [ 17.306942] Subsystem error monitoring/handling services are up [ 17.426170] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 17.436311] Subsystem error monitoring/handling services are up [ 17.455843] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0x10 soc_id 0xffffffff [ 17.455899] ath11k c000000.wifi: fw_version 0x270206d0 fw_build_timestamp 2022-08-04 13:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 [ 17.482567] ath11k c000000.wifi: qmi caldata downloaded: type: 2 [ 17.556138] remoteproc remoteproc1: remote processor 4ab000.remoteproc_pd1 is now up [ 17.563274] ath11k c000000.wifi: No qcom,pta_num entry in dev-tree. [ 17.563324] ath11k c000000.wifi: No qcom,coex_mode entry in dev-tree. [ 17.567040] ath11k soc:wifi1@c000000: qcn6122 [ 17.569007] ath11k c000000.wifi: No qcom,bt-active-time entry in dev-tree. [ 17.575928] remoteproc remoteproc2: powering up cd00000.remoteproc:remoteproc_pd2 [ 17.580071] ath11k c000000.wifi: No qcom,bt-priority-time entry in dev-tree. [ 17.587030] remoteproc remoteproc2: Booting fw image IPQ5018/q6_fw.mdt, size 1820 [ 17.594213] ath11k c000000.wifi: No qcom,coex-algo entry in dev-tree. [ 17.594219] ath11k c000000.wifi: No qcom,pta-priority entry in dev-tree. [ 17.618292] Subsystem error monitoring/handling services are up [ 17.699668] ath11k soc:wifi1@c000000: qmi ignore invalid mem req type 10 [ 17.751401] remoteproc remoteproc2: remote processor cd00000.remoteproc:remoteproc_pd2 is now up [ 17.753333] kmodloader: done loading kernel modules from /etc/modules.d/* [ 17.822345] ath11k soc:wifi1@c000000: chip_id 0x0 chip_family 0x4 board_id 0x60 soc_id 0xffffffff [ 17.822404] ath11k soc:wifi1@c000000: fw_version 0x270206d0 fw_build_timestamp 2022-08-04 13:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 [ 17.849384] ath11k soc:wifi1@c000000: qmi caldata downloaded: type: 2 [ 17.853018] ath11k c000000.wifi: Direct firmware load for ath11k/IPQ5018/hw1.0/qdss_trace_config.bin failed with error -2 [ 17.854929] ath11k c000000.wifi: Falling back to sysfs fallback for: ath11k/IPQ5018/hw1.0/qdss_trace_config.bin [ 18.075495] ieee80211 phy1: copying sband (band 1) due to VHT EXT NSS BW flag [ 18.077751] ath11k soc:wifi1@c000000: Direct firmware load for ath11k/qcn6122/hw1.0/qdss_trace_config.bin failed with error -2 [ 18.077816] ath11k soc:wifi1@c000000: Falling back to sysfs fallback for: ath11k/qcn6122/hw1.0/qdss_trace_config.bin [ 18.359993] ath11k c000000.wifi: Direct firmware load for qdss_trace_config.bin failed with error -2 [ 18.360065] ath11k c000000.wifi: Falling back to sysfs fallback for: qdss_trace_config.bin [ 18.958788] ath11k c000000.wifi: qmi failed to load QDSS config: qdss_trace_config.bin [ 18.958844] ath11k c000000.wifi: Failed to download QDSS config to FW: -12 [ 20.237912] ECM init [ 20.238096] ECM database jhash random seed: 0x926490d8 [ 20.242396] ECM init complete [ 22.324296] br-lan: port 1(eth1) entered blocking state [ 22.324348] br-lan: port 1(eth1) entered disabled state [ 22.333525] device eth1 entered promiscuous mode [ 22.342834] br-lan: port 1(eth1) entered blocking state [ 22.342896] br-lan: port 1(eth1) entered forwarding state [ 22.374425] nss-dp 39c00000.dp1 eth0: PHY Link up speed: 1000 [ 23.366752] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 23.543156] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.968704] wlan0: Created a NSS virtual interface [ 23.980764] br-lan: port 2(wlan0) entered blocking state [ 23.980836] br-lan: port 2(wlan0) entered disabled state [ 24.000981] device wlan0 entered promiscuous mode [ 24.001272] br-lan: port 2(wlan0) entered blocking state [ 24.004705] br-lan: port 2(wlan0) entered forwarding state [ 24.379024] br-lan: port 2(wlan0) entered disabled state [ 24.462324] ath11k c000000.wifi: bss color param 0x4000000 set on vdev 0 [ 24.464046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 24.469696] br-lan: port 2(wlan0) entered blocking state [ 24.474445] br-lan: port 2(wlan0) entered forwarding state [ 24.678935] debugfs: File 'virt_if' in directory 'stats' already present! [ 24.679390] wlan1: Created a NSS virtual interface [ 24.692777] br-lan: port 3(wlan1) entered blocking state [ 24.692841] br-lan: port 3(wlan1) entered disabled state [ 24.700493] device wlan1 entered promiscuous mode [ 24.703864] br-lan: port 3(wlan1) entered blocking state [ 24.707177] br-lan: port 3(wlan1) entered forwarding state [ 25.447037] br-lan: port 3(wlan1) entered disabled state [ 33.009624] ath11k soc:wifi1@c000000: bss color param 0x2c000000 set on vdev 0 [ 33.011268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 33.017249] br-lan: port 3(wlan1) entered blocking state [ 33.022309] br-lan: port 3(wlan1) entered forwarding state |
@114514thD |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
AX3000（M81、RA81）刷入最新的几个固件（老固件没试），全都是一开无线，就过一会自己熄灯断网，ttl输命令无反应，测电压txrx1v，vcc1.8v
补充：是2.4G无线中继后开启2.4G无线
The text was updated successfully, but these errors were encountered: