README

## About
- This TA is written for use within Splunk 9.x
- It is intended to be used with Synology SoHo products. e.g. DS923, DS923
- See Vendor: [Synology](https://www.synology.com/en-us/products/DS923+)
- I publish this as an individual within the cyber security community, it is not an official release from the vendor.

## Splunkbase:
- First listed as of 2024-04-17
- https://classic.splunkbase.splunk.com/app/7316/

## Setup
- This is the 'TA' which should be installed on your UF, HF, IDX and SH
- props.conf, is the key useful file that has the Great8 applied. 

### Sourcetype:
- This app uses the following sourcetype, you may wish to adapt, just ensure to be consistent.
[synology:nas:syslog]

## Git:
- See [Github](https://github.com/jameswintermute/TA_Synology-NAS)
- feedback to 'jameswintermute 0x40 protonmail.ch' OR Mastodon: jameswintermute@infosec.exchange