Skip to content

Latest commit

 

History

History
7 lines (5 loc) · 687 Bytes

README.md

File metadata and controls

7 lines (5 loc) · 687 Bytes

k3ng_cw_keyer

K3NG Arduino CW Keyer

The K3NG Keyer is an open source Arduino based CW (Morse Code) keyer with a lot of features and flexibility, rivaling commercial keyers which often cost significantly more. The code can be used with a full blown Arduino board or an AVR microcontroller chip can be programmed and used directly in a circuit. This keyer is suitable as a standalone keyer or for use permanently installed inside a rig, especially homebrew QRP rigs. It’s open source code so you can fully customize it to fit your needs and also perhaps learn from it or find coding ideas for other projects.

Documentation is located here: https://github.com/k3ng/k3ng_cw_keyer/wiki