LCD driver for the Raspberry PI Installation

v1.7-20180320
Update to support Raspbian Version:March 2018(Release date:2018-03-13)
Update:
v1.6-20170824
Update xserver to support Raspbian-2017-08-16
Update:
v1.5-20170706
Update to support Raspbian-2017-07-05,Raspbian-2017-06-21
Update:
v1.3-20170612
fixed to support Raspbian-2017-03-02,Raspbian-2017-04-10
Update:
v1.2-20170302
Add xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb to support Raspbian-2017-03-02
Update:
v1.1-20160815

1.)Step1, Install Raspbian official mirror

a)Download Raspbian official mirror:
https://www.raspberrypi.org/downloads/
b)Use“SDFormatter.exe”to Format your TF Card
c)Use“Win32DiskImager.exe” Burning mirror to TF Card

2.) Step2, Clone my repo onto your pi

Use SSH to connect the raspberry pi,
And Ensure that the raspberry pi is connected to the Internet before executing the following commands:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/

3.)Step3, According to your LCD's type, excute:

In case of 2.8" LCD(MPI2801)
sudo ./LCD28-show

In case of 3.2" LCD(MPI3201)
sudo ./LCD32-show

In case of 3.5inch RPi Display(MPI3501)
sudo ./LCD35-show

In case of 3.5" HDMI Display-B(MPI3508)
sudo ./MPI3508_480_320-show
or
sudo ./MPI3508_600_400-show
or
sudo ./MPI3508_720_480-show
or
sudo ./MPI3508_810_540-show
or
sudo ./MPI3508_960_640-show

In case of 5inch HDMI Display-Rtouch(MPI5002)
sudo ./LCD5-show

In case of 7inch HDMI Display-B-800X480(MPI7001)
sudo ./LCD7B-show

In case of 7inch HDMI Display-C-1024X600(MPI7002)
sudo ./LCD7C-show

In case of 3.5" DPI Display-MPI3510
sudo ./MPI3510-show
In case of 3.97" LCD
sudo ./LCD397-show
In case of 4.3" LCD
sudo ./LCD43-show
If you need to switch back to the traditional HDMI display
sudo ./LCD-hdmi

Wait a few minutes,the system will restart automaticall , enjoy with your LCD.

The LCD-show.tar.gz also can be download from: http://www.hellolcd.com/wiki/LCD-show