Why? Why not. Actual reasons:
- Fun way to screw around and make a V0 more interesting
- Better Z and bed leveling: self-leveling, no leadscrews to wobble or source, and avoids cantilevered bed mounting
- Cheap way to see what a V2 is like from a software side
- Toolhead (extruder + hotend): V0.1 Mini-AB
- XY Drive: F623 bearings, GT2 belt, 16T pulleys, NEMA14 motors
- Motion: MGN7H 150mm rails for Z and Y with MGN9C 150mm for X
- Bed: 120x120
- Z drives - geared down 4:1 using GT2 16T and GT2 64T either from Powge or the printed version from the Voron Jetpack extruder for the belted Z to run the gantry
- Use as much V2.4 (scaled-down) as possible
- utilize the Klicky Probe for QGL or annex engineering quickdraw, or a Pinda Probe mounted to the miniAfterburner
| Misumi Part # | Qty | Notes |
|---|---|---|
| HFS3-1515-300 | 4 | Blind holes need to be drilled |
| HFS3-1515-220 | 10 | Ends need to be tapped (M3) |
| HFS3-1515-205 | 2 | |
| HFS3-1515-190 | 1 | |
| HFS3-1515-125 | 1 |
Thanks to the following people on discord who have helped get this printer finished
@TheWarolf#1247
@L.e.o.p.a.r.d#0990
@deepfriedheroin#5006
@JosAr#0517
@sentein#3903
@madcat#7838
@Kyrios#5486
@faithblinded#1491
@zruncho#1790
@Finn#2449
if you wanna help support the project you can here