Swapped RED and BLUE color channels on the LCD

[TheCrypt0]

Thank you for the great work with this firmware.
I've just flashed it on my scope and I noticed a weird behavior where the red and blue color channels seems to be swapped. Nothing too fancy and (probably) easily fixable but worth mentioning.

I took a look at the code and in global.h the analog line should actually be yellow:

// display colours
#define AN_SIGNAL1    ILI9341_YELLOW
#define DG_SIGNAL1    ILI9341_RED
#define DG_SIGNAL2    ILI9341_BLUE
#define DG_SIGNAL3    ILI9341_GREEN

As expected the ILI9341_YELLOW is defined in the Adafruit library:

#define ILI9341_YELLOW      0xFFE0      /* 255, 255,   0 */

Maybe a change with the new LCD controller?

[gregcrago]

I have Original JYETech 150 and I get BLUE text as well. I changed my Stats and Cursor text my changing in display.cpp line 974 tft_setTextColor(ILI9341_BLUE, ILI9341_BLUE); // should now get RED text and also change line 682 to tft_setTextColor(ILI9341_BLUE, ILI9341_BLUE); // should now get RED text
It would be nice to know all the the actual colors in this unit. Analog is set to YELLOW, but I see CYAN

[gregcrago]

in global.h I changed:
#define AN_SIGNAL1 ILI9341_CYAN // now displays YELLOW
#define DG_SIGNAL1 ILI9341_BLUE // now displays RED

now it looks like the pictures, the BLUE text overlay and digital signal was very hard to read

[TheCrypt0]

I've finally managed to fix it. Just replace the following lines in the file:

https://github.com/michar71/Open-DSO-150/blob/master/Src/TFTLib/Adafruit_TFTLCD_8bit_STM32.cpp#L53

...
writeRegister8(ILI9341_MADCTL , ILI9341_MADCTL_MY | ILI9341_MADCTL_RGB);
...

https://github.com/michar71/Open-DSO-150/blob/master/Src/TFTLib/Adafruit_TFTLCD_8bit_STM32.cpp#L291

void setRotation(uint8_t x)
{
  //perform hardware-specific rotation operations...
   uint16_t t = 0;


   if ( dispControllerId==0x8552)
   {
	   x = (x+1) % 4; // Landscape & portrait are inverted compared to ILI
   }


//#ifdef IS_ST7789
//   x = (x+1) % 4; // Landscape & portrait are inverted compared to ILI
//#endif
 

   switch (x)
   {
   case 2:
     t = ILI9341_MADCTL_MX | ILI9341_MADCTL_RGB;
     break;
   case 3:
     t = ILI9341_MADCTL_MV | ILI9341_MADCTL_RGB;
     break;
  case 0:
    t = ILI9341_MADCTL_MY | ILI9341_MADCTL_RGB;
    break;
   case 1:
     t = ILI9341_MADCTL_MX | ILI9341_MADCTL_MY | ILI9341_MADCTL_MV | ILI9341_MADCTL_RGB;
     break;
   }
   writeRegister8(ILI9341_MADCTL, t ); // MADCTL
   // For 9341, init default full-screen address window:
   setAddrWindow(0, 0, TFTWIDTH - 1, TFTHEIGHT - 1); // CS_IDLE happens here
}