Replace MY_RADIO_NRF24 with MY_RADIO_RF24

mfalkvidd · mfalkvidd · commit 36bee0b7426c · 2019-03-06T16:56:12.000+01:00
diff --git a/examples/BinarySwitchSensor/BinarySwitchSensor.ino b/examples/BinarySwitchSensor/BinarySwitchSensor.ino
@@ -31,7 +31,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/BinarySwitchSensorIndication/BinarySwitchSensorIndication.ino b/examples/BinarySwitchSensorIndication/BinarySwitchSensorIndication.ino
@@ -32,7 +32,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <Adafruit_NeoPixel.h>
diff --git a/examples/DallasTemperatureSensor/DallasTemperatureSensor.ino b/examples/DallasTemperatureSensor/DallasTemperatureSensor.ino
@@ -29,7 +29,7 @@
 //#define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/DhtTemperatureAndHumiditySensor/DhtTemperatureAndHumiditySensor.ino b/examples/DhtTemperatureAndHumiditySensor/DhtTemperatureAndHumiditySensor.ino
@@ -35,7 +35,7 @@
 #define MY_DEBUG
 
 // Enable and select radio type attached 
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 //#define MY_RS485
  
diff --git a/examples/DimmableLightWithRotaryEncoderButton/DimmableLightWithRotaryEncoderButton.ino b/examples/DimmableLightWithRotaryEncoderButton/DimmableLightWithRotaryEncoderButton.ino
@@ -45,7 +45,7 @@
 #define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/DistanceSensor/DistanceSensor.ino b/examples/DistanceSensor/DistanceSensor.ino
@@ -30,7 +30,7 @@
 #define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/GPSSensor/GPSSensor.ino b/examples/GPSSensor/GPSSensor.ino
@@ -31,7 +31,7 @@
 #define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 // GPS position send interval (in millisectonds)
diff --git a/examples/GatewayENC28J60/GatewayENC28J60.ino b/examples/GatewayENC28J60/GatewayENC28J60.ino
@@ -45,7 +45,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 // When ENC28J60 is connected we have to move CE/CSN pins for NRF radio
diff --git a/examples/HeatpumpIRController/HeatpumpIRController.ino b/examples/HeatpumpIRController/HeatpumpIRController.ino
@@ -29,7 +29,7 @@
 #define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 // HeatpumpIR libraries,
diff --git a/examples/IrSensor/IrSensor.ino b/examples/IrSensor/IrSensor.ino
@@ -46,7 +46,7 @@
 #define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 
 #define MY_NODE_ID      5
 
diff --git a/examples/IrrigationController/IrrigationController.ino b/examples/IrrigationController/IrrigationController.ino
@@ -85,7 +85,7 @@ Contributed by Jim (BulldogLowell@gmail.com) with much contribution from Pete (p
 //#define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 //#define MY_NODE_ID 1  // Set this to fix your Radio ID or use Auto
diff --git a/examples/LightLuxSensor/LightLuxSensor.ino b/examples/LightLuxSensor/LightLuxSensor.ino
@@ -42,7 +42,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/LightningSensor/LightningSensor.ino b/examples/LightningSensor/LightningSensor.ino
@@ -7,7 +7,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/MAX6875TemperatureSensor/MAX6875TemperatureSensor.ino b/examples/MAX6875TemperatureSensor/MAX6875TemperatureSensor.ino
@@ -39,7 +39,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/MH-Z19 CO2 sensor b/examples/MH-Z19 CO2 sensor
@@ -33,7 +33,7 @@
 #define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24                            // A 2.4Ghz transmitter and receiver, often used with MySensors.
+#define MY_RADIO_RF24                            // A 2.4Ghz transmitter and receiver, often used with MySensors.
 // #define MY_RF24_PA_LEVEL RF24_PA_MIN           // This sets a low-power mode for the radio. Useful if you use the verison with the bigger antenna, but don't want to power that from a separate power source. It can also fix problems with fake Chinese versions of the radio.
 // #define MY_RADIO_RFM69                         // 433Mhz transmitter and reveiver.
 
diff --git a/examples/OregonSensorDecode/OregonSensorDecode.ino b/examples/OregonSensorDecode/OregonSensorDecode.ino
@@ -49,7 +49,7 @@
 #define MY_NODE_ID 10
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/PMS-7003 dust sensor b/examples/PMS-7003 dust sensor
@@ -53,7 +53,7 @@
 #define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24                              // A 2.4Ghz transmitter and receiver, often used with MySensors.
+#define MY_RADIO_RF24                              // A 2.4Ghz transmitter and receiver, often used with MySensors.
 #define MY_RF24_PA_LEVEL RF24_PA_MIN                // This sets a low-power mode for the radio. Useful if you use the verison with the bigger antenna, but don't want to power that from a separate power source. It can also fix problems with fake Chinese versions of the radio.
 // #define MY_RADIO_RFM69                           // 433Mhz transmitter and reveiver.
 
diff --git a/examples/ParkingSensor/ParkingSensor.ino b/examples/ParkingSensor/ParkingSensor.ino
@@ -43,7 +43,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/PlantMoisture/PlantMoisture.ino b/examples/PlantMoisture/PlantMoisture.ino
@@ -44,7 +44,7 @@
 // #define MY_DEBUG
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_NRF5_ESB
 //#define MY_RADIO_RFM69
 //#define MY_RADIO_RFM95
diff --git a/examples/PressureSensor/PressureSensor.ino b/examples/PressureSensor/PressureSensor.ino
@@ -53,7 +53,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24                            // A 2.4Ghz transmitter and receiver, often used with MySensors.
+#define MY_RADIO_RF24                            // A 2.4Ghz transmitter and receiver, often used with MySensors.
 // #define MY_RF24_PA_LEVEL RF24_PA_MIN              // This sets a low-power mode for the radio. Useful if you use the version with the bigger antenna, but don't want to power that from a separate power source. It can also fix problems with fake Chinese versions of the radio.
 // #define MY_RADIO_RFM69                         // 433Mhz transmitter and reveiver.
 
diff --git a/examples/RFIDLockSensor/RFIDLockSensor.ino b/examples/RFIDLockSensor/RFIDLockSensor.ino
@@ -47,7 +47,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/RGB_3D/RGB_3D.ino b/examples/RGB_3D/RGB_3D.ino
@@ -33,7 +33,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/RainGauge/RainGauge.ino b/examples/RainGauge/RainGauge.ino
@@ -41,7 +41,7 @@
 //#define MY_DEBUG // Enable MySensors debug prints to serial monitor
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 //#define MY_RF24_PA_LEVEL RF24_PA_MAX //Options: RF24_PA_MIN, RF24_PA_LOW, RF24_PA_HIGH, RF24_PA_MAX
diff --git a/examples/RealTimeClockDisplaySensor/RealTimeClockDisplaySensor.ino b/examples/RealTimeClockDisplaySensor/RealTimeClockDisplaySensor.ino
@@ -43,7 +43,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
  
 #include <SPI.h>
diff --git a/examples/RelayWithButtonActuator/RelayWithButtonActuator.ino b/examples/RelayWithButtonActuator/RelayWithButtonActuator.ino
@@ -33,7 +33,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 // Enabled repeater feature for this node
diff --git a/examples/SMSGatewayNode/SMSGatewayNode.ino b/examples/SMSGatewayNode/SMSGatewayNode.ino
@@ -83,7 +83,7 @@
 #define GATEWAY_ID 0
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 // defines for sensors
diff --git a/examples/ServoActuator/ServoActuator.ino b/examples/ServoActuator/ServoActuator.ino
@@ -35,7 +35,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/Si7021TemperatureAndHumiditySensor/Si7021TemperatureAndHumiditySensor.ino b/examples/Si7021TemperatureAndHumiditySensor/Si7021TemperatureAndHumiditySensor.ino
@@ -37,7 +37,7 @@
 //#define REPORT_BATTERY_LEVEL
 
 // Enable and select radio type attached 
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 //#define MY_RS485
 
diff --git a/examples/TimeAwareSensor/TimeAwareSensor.ino b/examples/TimeAwareSensor/TimeAwareSensor.ino
@@ -29,7 +29,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
diff --git a/examples/TouchDisplaySceneControllerSensor/TouchDisplaySceneControllerSensor.ino b/examples/TouchDisplaySceneControllerSensor/TouchDisplaySceneControllerSensor.ino
@@ -59,7 +59,7 @@
 #define MY_SOFTSPI
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <TimeLib.h> 
diff --git a/examples/WeatherStationSensor/WeatherStationSensor.ino b/examples/WeatherStationSensor/WeatherStationSensor.ino
@@ -53,7 +53,7 @@
 #define MY_DEBUG 
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24                            // A 2.4Ghz transmitter and receiver, often used with MySensors.
+#define MY_RADIO_RF24                            // A 2.4Ghz transmitter and receiver, often used with MySensors.
 // #define MY_RF24_PA_LEVEL RF24_PA_MIN              // This sets a low-power mode for the radio. Useful if you use the version with the bigger antenna, but don't want to power that from a separate power source. It can also fix problems with fake Chinese versions of the radio.
 // #define MY_RADIO_RFM69                         // 433Mhz transmitter and reveiver.
 
diff --git a/libraries/Oregon/examples/MySensors_example/MySensors_example.ino b/libraries/Oregon/examples/MySensors_example/MySensors_example.ino
@@ -49,7 +49,7 @@
 #define MY_NODE_ID 10
 
 // Enable and select radio type attached
-#define MY_RADIO_NRF24
+#define MY_RADIO_RF24
 //#define MY_RADIO_RFM69
 
 #include <SPI.h>
