weatherdata.yaml

esphome:
  name: weerhuisje
  platform: ESP8266
  board: nodemcuv2

wifi:
  ssid: "...."
  password: "...."
  ap:
    ssid: "Weerhuisje AP"
    password: "...."
  reboot_timeout: 1min
  power_save_mode: none
  manual_ip:
    static_ip: 192.168.x.x
    gateway: 192.168.x.x
    subnet: 255.255.255.0

captive_portal:

logger:

# Enable Home Assistant API
api:

ota:

time:
  - platform: homeassistant
    id: homeassistant_time
    timezone: Europe/Amsterdam

# Enable UART for SDS011
uart:
  rx_pin: D1
  tx_pin: D2
  baud_rate: 9600

# Enable i2c for BME280
i2c:
  sda: D5
  scl: D6
  scan: true

sensor:
  - platform: sds011
    pm_2_5:
      name: "Particulate Matter <2.5µm Concentration"
    pm_10_0:
      name: "Particulate Matter <10.0µm Concentration"
    update_interval: 30min

  - platform: bme280
    update_interval: 60s
    address: 0x76
    temperature:
      name: "BME280 Temperature"
    pressure:
      name: "BME280 Pressure"
    humidity:
      name: "BME280 Humidity"
  - platform: uptime
    name: "Weerhuisje uptime"
    update_interval: 60s
  - platform: wifi_signal
    name: "Weerhuisje WiFi signaal"
    update_interval: 60s

binary_sensor:
  - platform: status
    name: "Weerhuisje Status"

text_sensor:
  - platform: wifi_info
    ip_address:
      name: Weerhuisje IP Address
    ssid:
      name: Weerhuisje Connected SSID
    bssid:
      name: Weerhuisje Connected BSSID
  - platform: version
    name: Weerhuisje Version

switch:
  - platform: restart
    name: "Weerhuisje Restart"