Skip to content

Latest commit

 

History

History
245 lines (211 loc) · 11 KB

CHANGELOG.md

File metadata and controls

245 lines (211 loc) · 11 KB
Raw

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

[Unreleased]

Added

  • Added functions to start and stop WiFi and Http server.
  • Added Additional logging to the custom characteristic.
  • Added option to enable/disable UDP logging. Default is disabled.
  • Added Wiki links to most SS2K pages. see #314

Changed

  • Refactored ERG.
  • Reset to Default must be confirmed see #51
  • Update Firmware: Upload dialog accepts .bin, .html and .css files. see #98
  • Removed conflicting secondary BLE indicate when a shift was preformed via the custom characteristic.
  • Default stepper power is now used on reset to defaults.
  • Refactored Main and HTTP Server.
  • Changed from hard coding to Enums in BLEServer.
  • Added simulateWatts to ERG mode internal check.
  • Increased BLE Stack(s) and reduced ERG stack.
  • Disabled shifter ISR while ERG is running.
  • Fixed possible infinite loop in ERG when stepper never reached target position due to being past min or max position.
  • When UDP logging is enabled, html will no longer request logging info.
  • Increased remote server minimum packet delay to 325ms and max to 700ms.

Hardware

  • Added Ultra Short Case mod which should allow as little as ~40mm from knob center to head tube.
  • Revised shifter for easier printing. Updated printing instructions.
  • moved original shifter design into Archive directory

IC4 Mod

[1.12.30]

Added

  • Added userConfig shifterDir to change direction of shifters in software to compensate for wiring
  • Added userConfig StepperDir to change direction of stepper in software to compensate for wiring
  • Added backend and html for shifter and stepper directions.
  • Added parameters for auto homing.

Changed

  • Fixed a couple bugs in PowerTables
  • Fixed BLE Scanner webpage not displaying devices.
  • Corrected a check in the FTMS write control point indication.
  • readme copy change
  • added bridging improvements for screw holes - in cad but missing in STL

Hardware

IC4 Mod

[1.12.26]

Added

  • Added Webpage for Shifting.
  • Added /shift server on backend.
  • Split userConfig into userConfig and rtConfig.
  • Added ERG testing to btsimulator.html
  • Broke out ERG computation into it's own task.
  • Added image for wiki.
  • Replaced existing shifter housing with new and improved 2 in 1 revision

Changed

  • Adjusted the order of "Submit" "Reboot" and "Reset to Defaults" on the settings page.
  • Adjusted the setting webpage so "reset to defaults" is harder to accidentally press.
  • Increased the amount of free stack by removing the default Arduino loop();
  • Updated /shift server on to rtConfig.
  • Fixed redeclaring global targetposition in moveStepper().
  • Renamed Settings page "Submit" button to "Save Setting"

Hardware

  • Increased hex head and nut size to 13mm.
  • Increased depth on Knob Cup 2mm so a thicker nut can be used.
  • Added assembly .gif images.

IC4 Mod

  • NEW: Hex bolt mod for 40t gear and matching ic4 cup/mount. This is a drop-in replacement for the plastic printed gear + cup/holder combination. This adds a lot of strength
  • Renamed directory to something more apparent.
  • Removed need for support material from case.
  • Thicker slide design which removes need for washers.
  • Slightly shorter slide - should allow more flexibility for ss2k placement on IC4.
  • Tighter tolerances on case and bike mount for slide fitting. It should be a tight enough to prevent accidental removal
  • Slightly larger diameter holes for m3 screws used in case assembly. Screws should be much easier to insert
  • Additional tolerance for m5 fitting.
  • Combined knob cup & knob insert for schwinn to reduce amount of plastic needed for the schwinn.
  • Including a revised 11t stl - A bit more clearance on inner diameter the drive shaft on my steppers.

[1.12.2]

Added

  • Firmware update will now download only spiffs files if missing without updating the firmware.
  • New UDP logger by @MarkusSchneider .
  • Added custom IC4 build and mount by @eMadman .

BugFixes

  • Power Correction factor now minimum .5 maximum 2.5 and added checks to stay within limits.
  • 404 now redirects to index file handler.
  • settings_processor now checks shiftsteps field to determine if it's on the main settings page.

[1.11.24]

Added

  • Moved FTMS callback decoding outside of the callback.
  • Revamped the way notify buffer works as it was causing a memory leak.
  • BLE Custom Characteristic motor driver calls now apply settings received.
  • Motor current now automatically scales if ESP32 temp starts getting too high.
  • Added comments after compiler #endif Statements to make it easier to see what the partner #if statement is.
  • Added BLE_syncMode to support syncing shifterPosition with bikes that also report their resistance level.
  • Added git tag to prevent branch from downgrading to the last release.
  • Added Hardware Version 2.0.
  • MCWPWM for stepper control.
  • Erg Sensitivity control added.
  • Function to stop motor and release tension if the user stops pedaling in ERG mode.
  • Received BLE is now buffered and then processed.
  • Added Fitness Machine supported inclination range characteristic.
  • Additional unit tests.

Changed

  • Renamed BLE_stepperPosition to BLE_targetPosition to clarify the variable it controls.
  • Increased BLE communications task to 3500 stack.
  • Fixed recurring debugging line when driver was at normal temp.
  • Fixed length of returnValue on custom BLE bool read requests.

[1.6.19] - 2021-6-19

Added

  • Initial implementation of the custom characteristic.
  • Added additional FTMS characteristics and some refactoring of shared variables
  • Added GZipped jQuery to fix non WAN connected manual updates.
  • Pin arduino-esp32 package to version 1.0.6 to fix build issue
  • Added + - Buttons to sliders.
  • Added firmware checklist to "~/" for PR and release candidate testing.
  • Added README.md to "~/Hardware/*" that provides help for the files contained within.
  • Added BakerEchelonStrap to "~/Hardware/Mounts/".
  • Added positive retention clip to "~/Hardware/Mounts".
  • Added Logan clip to "~/Hardware/Mounts".
  • Added experimental rigid mounting strap. * Fixed width to 65mm.
  • Add images for video links in Wiki Build How To.
  • Added webhook for simulated cadence.
  • Add image for video link in Build How To
  • Added images for video links in Wiki Build How To
  • Added XL (Extra Long) Mounting strap for Echelon.
  • Added Insert Peloton 7 Flat V2 .sldpart and .stl.
  • Added initial credits file.
  • Added initial changelog.
  • Enabled cpp-lint, pio check, and clang-format to enforce coding standards and catch errors.
  • Added support for ruing pre-commit to run pre-push checks.
  • Added github workflow on pull_request to validate changelog and coding standards.
  • Add hyphens to Flywheel GATT UUIDs.
  • Filter Flywheel advertisements by name.
  • Added unit tests for CyclePowerData.cpp
  • Add documentation to SensorData class.
  • Enabled native testing.
  • Added logging library which supports levels.

Changed

  • Moved Vin to the correct side on the ESP32 connection diagram.
  • Power Correction Factor minimum value is now .5
  • Made Revmaster insert slightly smaller.
  • Fixed minor spulling errurs.
  • Reorganized hardware library into per part subfolders.
  • Updater shifter cover to version 9.
  • Fixed missing strap loops on non-pcb case.
  • Power Correction Factor slider now updates correctly.
  • Removed unused http onServer calls.
  • Repaired btsimulator.html
  • Shortened HR characteristic to 2 bytes (Polar OH1 format)
  • Increased ShiftStep UI slider range.
  • Replaced DoublePower setting with PowerCorrectionFactor setting.
  • Reverted bytes_to_u16 macro.
  • Erg mode tweak.
  • Added another test for Flywheel BLE name.
  • Updated Echelon Insert
  • Fixed many issues exposed by the addition of cpp-lint, pio check, and clang-format.
  • Fixed merge issues.
  • Fixed Echelon licenses.
  • Fix Flywheel power/cadence decoding.
  • Ignore zero heart rate reported from remote FTMS.
  • Fix Assimoa Uno stuck cadence.
  • Started extract non-arduino code into a cross-platform library.
  • Changed all logging calls to new logging library.

Removed

  • Deleted and ignored .pio folder which had been mistakenly committed.

*1.3.21

  • SS2K BLE Server now accepts more than one simultaneous connection (you can not connect SS2K to both Zwift and another app simultaneously)
  • Echelon bike is now supported
  • SmartSpin2K.local more accessible with different browsers (fixed certain MDNS dropouts)
  • Flywheel bike support built in (still untested)
  • Backend (client) completely revamped to allow more device decoders, better stability, and faster network speeds.
  • Lots of FTMS server and client polishing
  • Added testing for decoders
  • Versioning now comes from releases
  • NimBLE library included
  • Increased total max connections to 6 devices
  • Refined debugging logs

*1.2.15

  • Fixed BLE cadence when accumulated torque values are present
  • Lowered memory footprint

*1.2.6

  • Added limited Telegram BLE debugging information for development. No sensitive information is sent back. I can make this telegram info available as a private group (in Telegram) if anyone is interested in seeing it. This was added because there are a couple BLE devices that don't seem to conform to the standard protocol and we need more information about them to get them to work properly.
  • Internal web UI links now use IP address instead of the local DNS name for compatibility with certain routers.
  • Added a favorite icon (favicon.ico) for browser compatibility.
  • Fixed an BLE bug which would occasionally cause a crash on scanning.
  • Changed priority of subroutines and optimized task memory footprint.
  • Streamlined the WiFi connect sequence.

*0.1.1.22

  • Power meter will now switch to the most recently connected and disconnect the other.
  • Double power option in the Bluetooth scanner webpage.
  • Bluetooth scanning now happens via a flag set in the client task.
  • Backend of the Bluetooth scanning page revamped.
  • Removed dedicated HTTP server callback for the Bluetooth scanner.

*0.1.1.11

  • All metrics now zero when correct BLE !connected.
  • Added HR->PWR off/auto switch.
  • WiFi starts up faster.
  • BLE now connects device on save.
  • BLE Scans are less error prone.
  • MDNS Fix for certain android browsers.
  • and probably lots of other stuff.

*0.1.1.2 A new binary version is out in OTAUpdates. Units should automatically update to this newest version.

  • Changes:

  • WiFi Fallback to AP mode is now 10 seconds.

  • WiFi AP mode Fallback SSID is now device name (MDNS name), and the password is whatever you have set.

  • ERG Mode slightly more aggressive.

  • Stealthchop 2 now selectable in settings.

  • Holding both shifters at boot resets the unit to defaults and erases filesystem. (firmware remains intact)

  • Holding both shifters for 3 seconds after boot preforms a BLE device scan/reconnect.

  • Bugfixes:

  • Automatic Updates setting switch now works :)