cmd_yarp.dox

/**
\page yarp yarp: the main YARP command-line interface

\ingroup yarp_tools

\tableofcontents

The command-line utility "yarp" performs a set of useful operations
for a YARP network.  It can give status information, make and break
connections between ports, and send/receive data to/from ports.
For an example of usage, see this section: \ref companion_extended.

\if MAN_PAGE_COND
\else
Here are the ways you can call yarp:
- \ref yarp_base
- \ref yarp_help

- \ref yarp_check
- \ref yarp_clean
- \ref yarp_cmake
- \ref yarp_conf
- \ref yarp_connect
- \ref yarp_detect
- \ref yarp_disconnect
- \ref yarp_exists
- \ref yarp_help
- \ref yarp_merge
- \ref yarp_name
- \ref name_check
- \ref name_get
- \ref name_list
- \ref name_register
- \ref name_set
- \ref name_unregister
- \ref yarp_namespace
- \ref yarp_ping
- \ref yarp_read
- \ref yarp_regression
- \ref yarp_resource
- \ref yarp_rpc
- \ref yarp_rpcserver
- \ref yarp_run
- \ref yarp_sample
- \ref yarp_server
- \ref yarp_terminate
- \ref yarp_topic
- \ref yarp_version
- \ref yarp_wait
- \ref yarp_where
- \ref yarp_write
\endif

\section yarp_base yarp

The utility gives a friendly message if called with no arguments
to confirm that it exists, and to give tips on where to get started
using it.  Our current implementation says:

\verbatim
This is the YARP network companion.
Call with the argument "help" to see a list of ways to use this program.
\endverbatim




\section yarp_check yarp check

Does some sanity tests of your setup.  If you run "yarp server" in
one terminal, and then run this command ("yarp check") in another,
you should see something like:

\verbatim
yarp: ==================================================================
yarp: === Trying to register some ports
yarp: ==================================================================
yarp: === Trying to connect some ports
yarp: Receiving input from /tmp/port/2 to /tmp/port/1 using tcp
yarp: Sending output from /tmp/port/2 to /tmp/port/1 using tcp
yarp: ==================================================================
yarp: === Trying to write some data
yarp: ==================================================================
yarp: === Trying to read some data
yarp: *** Read number 42
yarp: ==================================================================
yarp: === Trying to close some ports
yarp: Removing input from /tmp/port/2 to /tmp/port/1
yarp: Removing output from /tmp/port/2 to /tmp/port/1
yarp: *** YARP seems okay!
\endverbatim



\section yarp_clean yarp clean

\verbatim
yarp clean
yarp clean --timeout 10
\endverbatim

This command gets a list of all registered ports from the name server,
and checks them one by one to see if they are responding (using \ref
yarp_exists).  If they do not respond within a few seconds
they are unregistered (using \ref name_unregister).

If you run into troubles with this command seeming to hang on a port
name (in fact it is a very loooooong timeout), you may want to
\ref name_unregister "unregister" that port name yourself.  Alternatively,
you may specify a timeout in seconds after which YARP should give up on
reaching a port.

\section yarp_cmake yarp cmake

\verbatim
yarp cmake
\endverbatim

Generates a "CMakeLists.txt" that is suitable for
compiling code with YARP.  It is intended to
help new users get started on new projects quickly.




\section yarp_conf yarp conf

\verbatim
  yarp conf
  yarp conf --clean
  yarp conf IP SOCKETPORT
\endverbatim

This will report the location of
the file in which the name server location is configured.
For the author's machine, the result is:
\verbatim
/home/paulfitz/.config/yarp/conf/yarp.conf
\endverbatim
The first line of that file looks like this:
\verbatim
 15.255.112.22 10000
\endverbatim
This is simply the IP address and the port number of the yarp name
server.  The file can be modified by hand, but will be overwritten
if the name server does not respond and is discovered running somewhere
else.  You are also free to delete the file, which will force
autodetection of the server.

The name of this file will be different if \ref name_server_namespaces
"namespaces" are in use.  The file will be in the same directory, but
its name will be the name of the namespace, with all non-alphanumeric
characters replaced by "_", and ".conf" appended.

With the "--clean" option, the configuration file will be set to a
blank, empty state.

If an ip address and socket port number for the name server are supplied,
the configuration file will be rewritten to contain that information.




\section yarp_connect yarp connect

\verbatim
yarp connect OUTPUT_PORT INPUT_PORT
yarp connect OUTPUT_PORT INPUT_PORT CARRIER
yarp connect --persist OUTPUT_PORT INPUT_PORT
yarp connect --persist OUTPUT_PORT INPUT_PORT CARRIER
yarp connect --persist TOPIC INPUT_PORT
yarp connect --persist OUTPUT_PORT TOPIC
yarp connect --persist PORT
yarp connect --persist
\endverbatim

This will request the specified output port to send its output in
future to the specified input port.
Optionally, the carrier to be used can be added as an extra argument
(e.g. tcp, udp, mcast, ...).
Ordinarily, ports must already exist in order to be connected,
and connections last until one of the ports is removed (or the
connection is removed with \ref yarp_disconnect).
If "--persist" is specified, the ports do not need to already
exist, they will be connected whenever they are both present.
A list of all persistent connections involving a port
can be retrieved by providing the name of that port alone.
A list of all persistent connections can be retrieved by
omitting port names completely.
Persistent connections can be made to bundles of ports called
"topics", see \ref yarp_topic.



\section yarp_detect yarp detect

\verbatim
  yarp detect
  yarp detect --write
\endverbatim

This will search for the YARP name server using multicast.

With the "--write" option, a configuration file will be
written with the address for the name server, if found.
This will let regular YARP programs find the name server.




\section yarp_disconnect yarp disconnect

\verbatim
yarp disconnect OUTPUT_PORT INPUT_PORT
\endverbatim

This will request the specified output port to cease sending its output to
the specified input port.





\section yarp_exists yarp exists

\verbatim
yarp exists /PORT
\endverbatim

Check if a port is alive.  This can be useful as a quick test of
whether the process that owns the port is running.  It is designed for
use in scripts -- nothing is printed, the result is encoded in the
return value of the program (0 = port exists).

A variant of this command checks if a connection between two ports
exists:

\verbatim
yarp exists /SOURCE_PORT /TARGET_PORT
\endverbatim



\section yarp_help yarp help

This lists a human-readable summary of the
ways the utility can be used.  It is a short
version of what you are reading right now.




\section yarp_merge yarp merge

\verbatim
  yarp merge /PORT1 /PORT2
  yarp merge --input /PORT1 /PORT2 --output /PORT3 --worker /PORT/PREFIX --carrier udp
\endverbatim

This command merges input from several ports into a single message, sending that
on from an output port.

The user has to specifies a list of streaming ports (i0, i1, ..., iN) that he
wants to merge in a single output port (o0).
The module creates a corresponding number of input ports and automatically makes
the connections.
The values read from the input ports are merged and synchronized into the output
port according to the following rules:
- the data are appended in the output vector using the same order in which the
  input ports are specified by the user, i.e. o0 = [i0 | i1 | ... | iN].
- the timestamp of the output port o0 is assigned by the module.
- if in a time instant no data is received from ALL the input ports
  (i0, i1, ..., iN), no data is sent on the output port (o0).
- if in a time instant no data is received from SOME ports (e.g. iJ), the output
  vector will be o0 = [i0 | i1 | ... |iJ-1| ... |in], i.e. the previous sample
  will be used.

The output of the module can be logged in order to obtain a quick log of
multiple data streams on a single file.

For example:

\code
yarp merge /icub/left_arm/state:o /icub/left_arm/analog:o
\endcode

the output of the module can be logged on a file:

\code
yarp read ... /portsMerge/o0 envelope &> logfile.txt
\endcode




\section yarp_name yarp name

\verbatim
yarp name COMMAND ARG_1 ARG_2 ...
\endverbatim

This will send the given command and arguments to the YARP name server
and report the results.
\if MAN_PAGE_COND
\else
Here are the possible commands:
- \ref name_help
- \ref name_query
- \ref name_register
- \ref name_unregister
- \ref name_list
- \ref name_set
- \ref name_get
- \ref name_check
- \ref name_route
- \ref name_gc
\endif

For example:
\verbatim
# user types...
yarp name list
   # system responds...
   registration name root ip 172.16.232.1 port 10000 type text
   registration name fallback ip 224.2.1.1 port 10001 type mcast
   registration name /read ip 172.16.232.1 port 10002 type tcp
   registration name /write ip 172.16.232.1 port 10012 type tcp
   *** end of message
\endverbatim

This is equivalent to:

\verbatim
# user types...
yarp where
   # system responds...
   Name server is available at ip 172.16.232.1 port 10000
   Name server can be browsed at http://172.16.232.1:10000/
# user types...
telnet 172.16.232.1 10000
   # system responds...
   Trying 172.16.232.1...
   Connected to 172.16.232.1.
   Escape character is '^]'.
# user types...
NAME_SERVER list
   # system responds...
   registration name /read ip 172.16.232.1 port 10002 type tcp
   registration name root ip 172.16.232.1 port 10000 type text
   registration name fallback ip 224.2.1.1 port 10001 type mcast
   registration name /write ip 172.16.232.1 port 10012 type tcp
   *** end of message
# user types...
^]
   # system responds...
   telnet> quit
   Connection closed.
\endverbatim






\section name_help yarp name help

This will list the commands available from the name server.
For example, our current implementation gives:

\verbatim
Here are some ways to use the name server:
  NAME_SERVER register ...
  NAME_SERVER unregister ...
  NAME_SERVER query ...
  NAME_SERVER help ...
  NAME_SERVER set ...
  NAME_SERVER get ...
  NAME_SERVER check ...
  NAME_SERVER match ...
  NAME_SERVER list ...
  NAME_SERVER route ...
*** end of message
\endverbatim





\section name_query yarp name query

\verbatim
yarp name query PORT
\endverbatim

Requests registration information for the named port.  Response is of
the following form:
\verbatim
registration name PORT ip ADDRESS port NUMBER type CARRIER
*** end of message
\endverbatim
For example:
\verbatim
registration name /write ip 5.255.112.227 port 10001 type tcp
*** end of message
\endverbatim
If there is no registration for the port, the registration line
is omitted, and instead the response is simply:
\verbatim
*** end of message
\endverbatim






\section name_register yarp name register

\verbatim
yarp name register PORT
yarp name register PORT CARRIER
yarp name register PORT CARRIER IP
yarp name register PORT CARRIER IP NUMBER
\endverbatim

Requests creation of registration information for the named port.
Response is of the following form:
\verbatim
registration name PORT ip ADDRESS port NUMBER type CARRIER
*** end of message
\endverbatim
For example:
\verbatim
registration name /write ip 5.255.112.227 port 10001 type tcp
*** end of message
\endverbatim

Optionally, the user can take responsibility for more fields,
such as the carrier, ip, and socket port number.
Any value (including the port name) can be replaced by ``...'' to leave it
up to the name-server to choose it.  For example:
\verbatim
yarp name register ... tcp 127.0.0.1 8080
\endverbatim
Gives something of the form:
\verbatim
registration name /tmp/port/1 ip 127.0.0.1 port 8080 type tcp
*** end of message
\endverbatim
If you choose to set the ip yourself, be careful -- there is the
possibility of problems with multiple ways to identify the same
machine.  It is best to let the name server choose a name,
which it should do in a consistent way.  If a machine has
multiple ip addresses on multiple networks, that can be
handled -- see the
discussion of the ips property in the section on "yarp name set".
That is important for the purposes of controlling which
network is used for connections from one port to another.


\section name_unregister yarp name unregister

\verbatim
yarp name unregister PORT
\endverbatim

Removes registration information for the named port.
Response is of the following form:
\verbatim
*** end of message
\endverbatim


\section name_list yarp name list

Gives registration information of all known ports.
Response is of the following form:
\verbatim
registration name /write ip 130.251.4.159 port 10021 type tcp
registration name /read ip 130.251.4.159 port 10031 type tcp
registration name /tmp/port/4 ip 130.251.4.159 port 10011 type tcp
registration name /tmp/port/3 ip 130.251.4.52 port 10021 type tcp
registration name /tmp/port/2 ip 130.251.4.52 port 10011 type tcp
registration name /tmp/port/1 ip 130.251.4.159 port 10001 type tcp
*** end of message
\endverbatim



\section name_set yarp name set

\verbatim
yarp name set PORT PROPERTY VALUE1 VALUE2 ...
\endverbatim

The name server can store extra properties of a port, beyond the
bare details associated with registration.  The  set command
is used to do this.  For example, the command:
\verbatim
yarp name set /write offers tcp udp mcast
\endverbatim
Gets the following response:
\verbatim
port /write property offers = tcp udp mcast
\endverbatim
The get and check commands can then be used to query
such properties.

There are some special properties used by YARP.  Property ``ips''
can list multiple identifiers of a machine.  Property ``offers''
lists carriers that an output port can support.  Property ``accepts''
lists carriers that an input port can support.



\section name_get yarp name get

\verbatim
yarp name get PORT PROPERTY
\endverbatim

Gets the values of a stored property. For example,
after the set command example shown earlier, the command:
\verbatim
yarp name get /write offers
\endverbatim
Returns the following response:
\verbatim
port /write property offers = tcp udp mcast
\endverbatim



\section name_check yarp name check

\verbatim
yarp name check PORT PROPERTY VALUE
\endverbatim

Checks if a stored property can take the given value. For example,
after the set command example shown earlier, the command:
\verbatim
yarp name check /write offers tcp
\endverbatim
Returns the following response:
\verbatim
port /write property offers value tcp present true
\endverbatim



\section name_route yarp name route

\verbatim
yarp name route PORT1 PORT2
\endverbatim

Finds a good way to connect an output port to an input port, based
on the carriers they have in common (preferred carriers can optionally
be added to this command in decreasing order of preference) and
which carriers are physically possible (for example, `shmem'
requires ports to be on the same machine, and `local' requires
ports to belong to threads with a shared memory space).
For example, the command:
\verbatim
yarp name route /write /read
\endverbatim
Returns the following response:
\verbatim
port /write route /read = shmem://read
\endverbatim
This suggests that shmem is the best carrier to use.



\section name_gc yarp name gc

THIS COMMAND IS DEPRECATED, use \ref yarp_clean instead.

\verbatim
yarp name gc
\endverbatim

This requests that the server "garbage collect" any
registered ports that are no longer responding.
This is useful for cleaning up registrations corresponding
to programs that have crashed or been terminated
abruptly.  THIS COMMAND IS DEPRECATED, use \ref yarp_clean
instead.




\section yarp_namespace yarp namespace

\verbatim
yarp namespace
yarp namespace /namespace
\endverbatim

The yarp name server started by \ref yarp_server "yarp server" has
a port name associated with it.  By default, this is "/root".  This
can be changed, and it is useful to do so when a single network
is shared by people working on non-overlapping projects involving
YARP.

Type "yarp namespace" to report the current namespace.

Type "yarp namespace /my/space" to set the namespace to "/my/space".

See \ref name_server_namespaces "About YARP Namespaces" for (important)
details on how to use namespaces.




\section yarp_ping yarp ping

\verbatim
yarp ping /PORT
yarp ping --time /PORT
yarp pint --rate /PORT
\endverbatim

Get information about the specified port (optionally: timing and rate).  Result will be something
like:

\verbatim
This is "/port" at "tcp://192.168.0.5:10012"
There is an output connection from "/write" to "/read" using tcp
There is an input connection from "<ping>" to "/write" using text_ack
\endverbatim

The option --time reports timing measure about communication with the port.

The option --rate reports the rate at which information arrives from the port.

\section yarp_read yarp read

\verbatim
yarp read INPUT_PORT [envelope]
yarp read INPUT_PORT [envelope] OUTPUT_PORT
\endverbatim

This will create an input port of the specified name.  It will
then loop,
reading ``yarp bottles'' (a simple serialized list) and printing their content
to standard output.  This simple utility is intended for use in testing, and
getting familiar with using YARP.

For example, if you run "yarp server" in one terminal, "yarp read
/read" in another, and "yarp write /write verbatim /read" in another,
then everything you type on the "write" terminal will be echoed on the
"read" terminal.

Specifying an OUTPUT_PORT tries to connect that port to the current one.

Adding the "envelope" tag will request display of any envelope information
included in the message, such as timestamps.  Such information may
or may not be present, and is ignored if you do not specify this tag.



\section yarp_regression yarp regression

\verbatim
  yarp regression
  yarp regression <ClassName>Test
\endverbatim

Runs all tests or a specified test, if the YARP regression tests are
linked.  Normally, there are separate programs called "harness_os",
"harness_sig", etc that have groups of YARP tests linked.  So running:

\verbatim
  harness_os regression
\endverbatim

will run all tests related to YARP_os.  The main
YARP executable "yarp" does not usually have any tests linked.



\section yarp_resource yarp resource

\verbatim
  yarp resource --context CONTEXT --from CONFIG.ini
\endverbatim

An experimental tool for finding configuration files and other resource
files.  For details, see the yarp::os::ResourceFinder class.





\section yarp_rpc yarp rpc

\verbatim
yarp rpc /TARGET_PORT
yarp rpc /TARGET_PORT /LOCAL_NAME
\endverbatim

This will send a message to the target port and expect a response.
Useful only if you have a port that actually will respond.  Ports
associated with devices may behave like this.  You may optionally
specify the name for the connection.  "RPC" stands for Remote
Procedure Call.

An example of a port that will respond to RPC is the yarp server.
For example, if you run:
\verbatim
yarp rpc /root
\endverbatim
and type:
\verbatim
list
\endverbatim
you'll receive a response like:
\verbatim
Response: registration name /root ip 192.168.0.204 port 10000 type tcp
Response: registration name fallback ip 224.2.1.1 port 10001 type mcast
Response: *** end of message
\endverbatim
See \ref yarp_name for other commands the name server responds to.






\section yarp_rpcserver yarp rpcserver

\verbatim
yarp rpcserver /PORT_NAME
\endverbatim

This creates a test RPC server.  It will accept incoming commands, and
then pause for you to type the response (in standard Bottle text format).




\section yarp_run yarp run

yarprun provides a client-server environment that is able to run, kill and monitor applications on a remote machine, with the same syntax and behaviour in Windows and Linux.

See \ref yarprun for documentation.





\section yarp_sample yarp sample

\verbatim
  yarp sample --output /OUTPUT/PORT --period 0.1
  yarp sample --output /OUTPUT/PORT --rate 100
  yarp sample --input /INPUT/PORT --output /OUTPUT/PORT --period 0.1 --carrier udp
  yarp sample --output /OUTPUT/PORT --rate 100 --show
\endverbatim

This command repeats data on the output port at the specified
rate (in Hz) or period (in seconds).
If the <tt>show</tt> flag is given, the data is also printed on
standard output.  The input can either be connected externally or
specified with <tt>--input</tt> (and optionally <tt>--carrier</tt> to specify the
type of connection to use).

\section yarp_server yarp server

This starts a name server running on the current machine.
See \ref yarpserver "yarpserver" documentation for the options accepted by this
command.

\section yarp_terminate yarp terminate

\verbatim
yarp terminate /PORTNAME
\endverbatim

This will request the specified output to interrupt the process it
belongs to.  In general, this requires active cooperation from that
process, so it may or may not function.  Currently will work for the
".../quit" ports created by the yarpdev process.



\section yarp_topic yarp topic

\verbatim
yarp topic /TOPIC_NAME
yarp topic --remove /TOPIC_NAME
yarp topc --list
\endverbatim

Activates a topic name.  If a sufficiently recent yarp name server
is in use, then that topic name will act as a virtual repeater port.
If a persistent connection exists between ports /A, /B and /C and /TOPIC,
and from
/TOPIC to /X, /Y, and /Z, then ports /X, /Y, and /Z will each receive input
from all of /A, /B, and /C.  See \ref persistent_connections.





\section yarp_version yarp version

This will report on the yarp version available.  Example:

\verbatim
YARP Companion utility version 2.0 implemented in C++
\endverbatim











\section yarp_wait yarp wait

\verbatim
yarp wait /PORT
yarp wait /SRC /DEST
\endverbatim

Waits for the named port or connection to come into existence.  Terminates
when "yarp exists /PORT" or "yarp exists /SRC /DEST" would return true.
This can be useful in scripts.











\section yarp_where yarp where

This will report where the name server is believed to be running; for
example:

\verbatim
Name server is available at ip 15.255.112.22 port 10000
Name server can be browsed at http://15.255.112.22:10000/
\endverbatim

The name server registers this address with itself under the name "/root".
So typing:
\verbatim
yarp name query /root
\endverbatim
will get the same information.  See \ref name_query.

This command used to search for the name server if needed, but now
you need to explicitly request that with the \ref name_detect command.









\section yarp_write yarp write

\verbatim
yarp write OUTPUT_PORT [verbatim]
yarp write OUTPUT_PORT [verbatim] INPUT_PORT1 INPUT_PORT2 ...
\endverbatim

This will create an output port of the specified name.  It will then
loop, reading from standard input and writing yarp bottles.
Optionally, a list of input ports to connect to automatically can be
appended to the command.  This simple utility is intended for use in
testing, and getting familiar with using YARP.

If the "verbatim" keyword is included after the OUTPUT_PORT name,
then input from standard input will be transmitted as a string,
rather than as a bottle.  This will preserve the exact text
with whitespace and quoting.  Otherwise the input is interpreted
as a list of values that are transmitted in a standard network
format that will not preserve whitespace, quoting, and other
features.

For example, if you run "yarp server" in one terminal, "yarp read
/read" in another, and "yarp write /write verbatim /read" in another,
then everything you type on the "write" terminal will be echoed on the
"read" terminal.




















\section companion_extended An extended example

Start five terminals, called A-E.  Do the following:
\verbatim
[in terminal A] yarp server
[in terminal B] yarp check
\endverbatim
Terminal B should run some tests, then say yarp is "ok".  Now
do the following, leaving terminal A untouched:
\verbatim
[in terminal B] yarp read /read
[in terminal C] yarp write /write verbatim /read
\endverbatim
Now type some stuff into terminal C and hit return.  That stuff
should be echoed on terminal B.  Now try:
\verbatim
[in terminal D] yarp disconnect /write /read
\endverbatim
Now if you type stuff in terminal C, it no longer appears on B.
Now try:
\verbatim
[in terminal D] yarp connect /write /read
\endverbatim
Now if you type stuff in terminal C, it appears on B again.

If you have the "yarpdev" and "yarpview" programs, we can go further.
Try:
\verbatim
[in terminal E] yarpdev --device fakeFrameGrabber --period 2 --width 8 --height 8 --name /grabber
\endverbatim
This creates a test "device" with a port called "/grabber", outputting a
very small test image every 2 seconds.  You won't see much happen yet.
Try:
\verbatim
[in terminal D] yarpview --name /view &
[in terminal D] yarp connect /grabber /view
\endverbatim
You should now see a slow-moving red line.  Try:
\verbatim
[in terminal D] yarp connect /grabber /read
\endverbatim
You should now see a text representation of the image on terminal B
appearing every 2 seconds.

\if MAN_PAGE_COND
\else
See also:
@subpage yarpdev
@subpage yarpview
\endif

*/