Open Source development package for for yuzukihd Boards and more boards
✅: Supported — ❌: Not Supported Yet —
| Vender | Device | Chip | U-Boot | Linux | Defconfig | SPI NOR | SPI NAND | SD CARD | EMMC | Support |
|---|---|---|---|---|---|---|---|---|---|---|
| YuzukiHD | YuzukiRuler | F1C200s | 2020.07 | 5.4.180 | yuzukihd_yuzukiruler_defconfig | ✅ | ✅ | ✅ | ✅ | ✅ |
| YuzukiHD | YuzukiCore F1 | F1C200s | 2020.07 | 5.4.180 | yuzukihd_yuzukicore_f1_defconfig | ✅ | ✅ | ✅ | ✅ | ✅ |
| YuzukiHD | YuzukiCK1N | V3x | 2022.01 | 5.4.180 | yuzukihd_yuzukick1n_defconfig | ❌ | ❌ | ✅ | ||
| Sipeed | lichee nano | F1C100s | 2020.07 | 5.4.180 | sipeed_lichee_nano_defconfig | ✅ | ✅ | ✅ | ✅ | ✅ |
| Sipeed | lichee zero | V3s | 2020.07 | 5.4.180 | sipeed_lichee_zero_defconfig | ❌ | ❌ | ✅ | ✅ | |
| awol | nezha | D1-H | tina,uboot 2018 | tina,linux 2018 | awol_nezha_defconfig | ❌ | ❌ | ✅ | ❌ | |
| awol | nezha-d1s | D1s | tina,uboot 2018 | tina,linux 2018 | awol_nezha_d1s_defconfig | ❌ | ❌ | ✅ | ❌ | ✅ |
The recommended operating system is Ubuntu 18.04 WSL and Ubuntu 20.04 WSL. If you want to use a virtual machine or a physical machine running linux, please troubleshoot the problem by yourself. There is no solution here.
sudo apt install rsync wget unzip build-essential git bc swig libncurses-dev libpython3-dev libssl-dev python3-distutils!> Notice: Root permission is not necessery for download or extract.
!> For WSL2 Users: Please don't put this SDK in Windows partition, please put it under Linux partition, /mnt/ must not appear in the path.
git clone https://github.com/yuzukihd/Buildroot-YuzukiSBC
cd Buildroot-YuzukiSBC!> Notice: Root permission is not necessery for build firmware.
source envsetup.sh # Set the build environment
lunch # Change to Buildroot Directory
!> Notice: Root permission is not necessery for build firmware.
!> Caution: Apply defconfig will reset all buildroot configurations to default values. Generally, you only need to apply it once.
make *Defconfig Name*
eg.
make yuzukihd_yuzukiruler_defconfigmakerebuild-kernelrebuild-ubootsync_kernelDownload balenaEtcher at https://www.balena.io/etcher/
cd buildroot/output/images/ # To System img dir
sudo dd if=sdcard.img of=/dev/sdX bs=4M # dd it
Get sunxi-fel at github.com/linux-sunxi/sunxi-tools
cd buildroot/output/images/ # To System img dir
sunxi-fel -p spiflash-write 0 sysimage-nand.img # Write System to devicesGet XFEL at github.com/xboot/xfel
!> XFEL Driver install Instructions
cd buildroot/output/images/ # To System img dir
xfel spinand # Checkout device connection
xfel spinand write 0 sysimage-nand.img # Write System to devicesGet sunxi-fel at github.com/linux-sunxi/sunxi-tools
cd buildroot/output/images/ # To System img dir
sunxi-fel -p spiflash-write 0 sysimage-nor.img # Write System to devicesGet XFEL at github.com/xboot/xfel
!> XFEL Driver install Instructions
cd buildroot/output/images/ # To System img dir
xfel spinor # Checkout device connection
xfel spinor write 0 sysimage-nor.img # Write System to deviceswsl_path
If you are using the WSL environment, please run this command to clear the WSL environment variables before compiling, otherwise the following error will occur.
Your PATH contains spaces, TABs, and/or newline (\n) characters.
This doesn't work. Fix you PATH.
support/dependencies/dependencies.mk:27: recipe for target 'dependencies' failed
make: *** [dependencies] Error 1
lunch
Lunch 🚀 to buildroot.
rebuild_kernel = mkernel = rkernel
Delete the generated dtb and rebuild the kernel
rebuild_uboot = mboot = rboot
Rebuild the U-Boot
sync_kernel
Modify the kernel-related patch or need to restore the original kernel
Buildroot-YuzukiSBC uses a custom directory structure, and the following descriptions need to be met when submitting code.
├── Vender
│ ├── Board1
│ │ ├── config # Place Defconfig
│ │ │ ├── linux # Place Linux Defconfig
│ │ │ └── uboot # Place U-boot Defconfig
│ │ ├── dts # Place Device Trees for U-Boot and Linux (dts)
│ │ │ ├── linux # Place Linux Device Trees (Mutifiles)
│ │ │ └── uboot # Place U-boot Device Trees (Mutifiles)
│ │ ├── patch # Place Patches
│ │ └── rootfs # Rootfs Overlays
│ └── Board2
│ ├── config # Place Defconfig
│ │ ├── linux # Place Linux Defconfig
│ │ └── uboot # Place U-boot Defconfig
│ ├── dts # Place Device Trees for U-Boot and Linux (dts)
│ ├── patch # Place Patches
│ │ ├── linux # Place Patches for linux
│ │ └── uboot # Place Patches for U-boot
│ └── script # Place Script for uboot/linux
└── allwinner-generic # Allwinner Generic Configs
├── suniv-f1c100s # Chip Code - Chip Name
│ ├── configs # Place Default Defconfig
│ │ ├── linux # Place Linux Defconfig
│ │ └── uboot #
│ ├── dts # Place Device Trees (dtsi)
│ │ ├── linux # Device Trees For linux
│ │ └── uboot # Device Trees For U-boot
│ ├── patch # Place Patches
│ │ ├── linux # Place Patches for linux
│ │ └── uboot # Place Patches for U-boot
│ └── rootfs # Rootfs Overlays
└── suniv-generic # Chip Line Generic
For the sun20iw1p1(D1-H, D1s) platform, we introduced its stable version of OpenSBI as Supervisor Binary Interface. Which is not compatible with the upstream mainline OpenSBI.
Since the main line currently lacks support for chips and has fewer drivers, the BSP kernel and U-boot are used here. The compilation method and startup method are quite different from the mainline. This script is used here as the connection.
Since Buildroot does not provide dedicated ARGS for Post Script, it is shared with BR2_ROOTFS_POST_SCRIPT_ARGS, so it needs to be written together with the packaging script here.
post-build.sh -c xxxx.cfg <platform> <target dtb>
^for pack image ^for post-build.sh
In config
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/awol/nezha-d1s/script/genimage.cfg sun20i-d1s sun20i-d1s-nezha-linux.dtb"
First, open zadig under the XFEL driver folder and select List All Devices
Then select Allwinner USB Device VID_1f3a_PID_efe8, and replace the driver with WinUSB
