Ready to order (I think)

[TwoPigsToTheWind]

Slightly modified the layout to fit microATX mounting holes, moved all the I/O to one side, and added a header for the reset circuit for a case mounted button.

[slu4coder]

Looks really nice, the old layout seems to be pretty much intact. Let me know if it starts up ;-) and send me a photo for the build gallery.

[TwoPigsToTheWind]

Thanks! Hopefully it starts up without issue. I tried to change as little as possible, the routing was nice and tight on the old layout so I only changed what was needed to accommodate the mounting holes and rearranged I/O

[hans61]

I think it's very interesting. Especially the three expansion slots. They have 32 pin like the expansion port.
Why not expand now? And decode the I/O area (0xFE??) on the board. The usual connectors have 40 pins.
Then you wouldn't have to do it separately on every card. You could also assign an area to each slot. That would be it
Simplify handling of INH with multiple expansion cards.

[TwoPigsToTheWind]

ended up just ordering the "standard" board for now.

[hans61]

I'm interested because of the form factor. I've been thinking about a case for a while. I would be interested in a PCB.

[TwoPigsToTheWind]

i held off on ordering the microATX board for now. Thought it was best to wait till A) there are more expansion card to make use of and B) testing to see if there is anything to add to the main board. Regular board is on its way!