file.hh

/*
 * This file is open source software, licensed to you under the terms
 * of the Apache License, Version 2.0 (the "License").  See the NOTICE file
 * distributed with this work for additional information regarding copyright
 * ownership.  You may not use this file except in compliance with the License.
 *
 * You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 */
/*
 * Copyright 2015 Cloudius Systems
 */

#pragma once

#include "stream.hh"
#include "sstring.hh"
#include "core/shared_ptr.hh"
#include "core/align.hh"
#include "core/future-util.hh"
#include "core/fair_queue.hh"
#include "util/std-compat.hh"
#include <system_error>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/fs.h>
#include <sys/uio.h>
#include <unistd.h>

namespace seastar {

/// \addtogroup fileio-module
/// @{

/// Enumeration describing the type of a directory entry being listed.
///
/// \see file::list_directory()
enum class directory_entry_type {
    block_device,
    char_device,
    directory,
    fifo,
    link,
    regular,
    socket,
};

/// Enumeration describing the type of a particular filesystem
enum class fs_type {
    other,
    xfs,
    ext2,
    ext3,
    ext4,
    btrfs,
    hfs,
    tmpfs,
};

/// A directory entry being listed.
struct directory_entry {
    /// Name of the file in a directory entry.  Will never be "." or "..".  Only the last component is included.
    sstring name;
    /// Type of the directory entry, if known.
    compat::optional<directory_entry_type> type;
};

/// File open options
///
/// Options used to configure an open file.
///
/// \ref file
struct file_open_options {
    uint64_t extent_allocation_size_hint = 1 << 20; ///< Allocate this much disk space when extending the file
    bool sloppy_size = false; ///< Allow the file size not to track the amount of data written until a flush
    uint64_t sloppy_size_hint = 1 << 20; ///< Hint as to what the eventual file size will be
};

/// \cond internal
class io_queue;
class io_priority_class {
    unsigned val;
    friend io_queue;
public:
    unsigned id() const {
        return val;
    }
};

const io_priority_class& default_priority_class();

class file;
class file_impl;

class file_handle;

// A handle that can be transported across shards and used to
// create a dup(2)-like `file` object referring to the same underlying file
class file_handle_impl {
public:
    virtual ~file_handle_impl() = default;
    virtual std::unique_ptr<file_handle_impl> clone() const = 0;
    virtual shared_ptr<file_impl> to_file() && = 0;
};

class file_impl {
protected:
    static file_impl* get_file_impl(file& f);
public:
    unsigned _memory_dma_alignment = 4096;
    unsigned _disk_read_dma_alignment = 4096;
    unsigned _disk_write_dma_alignment = 4096;
public:
    virtual ~file_impl() {}

    virtual future<size_t> write_dma(uint64_t pos, const void* buffer, size_t len, const io_priority_class& pc) = 0;
    virtual future<size_t> write_dma(uint64_t pos, std::vector<iovec> iov, const io_priority_class& pc) = 0;
    virtual future<size_t> read_dma(uint64_t pos, void* buffer, size_t len, const io_priority_class& pc) = 0;
    virtual future<size_t> read_dma(uint64_t pos, std::vector<iovec> iov, const io_priority_class& pc) = 0;
    virtual future<> flush(void) = 0;
    virtual future<struct stat> stat(void) = 0;
    virtual future<> truncate(uint64_t length) = 0;
    virtual future<> discard(uint64_t offset, uint64_t length) = 0;
    virtual future<> allocate(uint64_t position, uint64_t length) = 0;
    virtual future<uint64_t> size(void) = 0;
    virtual future<> close() = 0;
    virtual std::unique_ptr<file_handle_impl> dup();
    virtual subscription<directory_entry> list_directory(std::function<future<> (directory_entry de)> next) = 0;
    virtual future<temporary_buffer<uint8_t>> dma_read_bulk(uint64_t offset, size_t range_size, const io_priority_class& pc) = 0;

    friend class reactor;
};

/// \endcond

/// A data file on persistent storage.
///
/// File objects represent uncached, unbuffered files.  As such great care
/// must be taken to cache data at the application layer; neither seastar
/// nor the OS will cache these file.
///
/// Data is transferred using direct memory access (DMA).  This imposes
/// restrictions on file offsets and data pointers.  The former must be aligned
/// on a 4096 byte boundary, while a 512 byte boundary suffices for the latter.
class file {
    shared_ptr<file_impl> _file_impl;
private:
    explicit file(int fd, file_open_options options);
public:
    /// Default constructor constructs an uninitialized file object.
    ///
    /// A default constructor is useful for the common practice of declaring
    /// a variable, and only assigning to it later. The uninitialized file
    /// must not be used, or undefined behavior will result (currently, a null
    /// pointer dereference).
    ///
    /// One can check whether a file object is in uninitialized state with
    /// \ref operator bool(); One can reset a file back to uninitialized state
    /// by assigning file() to it.
    file() : _file_impl(nullptr) {}

    file(shared_ptr<file_impl> impl)
            : _file_impl(std::move(impl)) {}

    /// Constructs a file object from a \ref file_handle obtained from another shard
    explicit file(file_handle&& handle);

    /// Checks whether the file object was initialized.
    ///
    /// \return false if the file object is uninitialized (default
    /// constructed), true if the file object refers to an actual file.
    explicit operator bool() const noexcept { return bool(_file_impl); }

    /// Copies a file object.  The new and old objects refer to the
    /// same underlying file.
    ///
    /// \param x file object to be copied
    file(const file& x) = default;
    /// Moves a file object.
    file(file&& x) noexcept : _file_impl(std::move(x._file_impl)) {}
    /// Assigns a file object.  After assignent, the destination and source refer
    /// to the same underlying file.
    ///
    /// \param x file object to assign to `this`.
    file& operator=(const file& x) noexcept = default;
    /// Moves assigns a file object.
    file& operator=(file&& x) noexcept = default;

    // O_DIRECT reading requires that buffer, offset, and read length, are
    // all aligned. Alignment of 4096 was necessary in the past, but no longer
    // is - 512 is usually enough; But we'll need to use BLKSSZGET ioctl to
    // be sure it is really enough on this filesystem. 4096 is always safe.
    // In addition, if we start reading in things outside page boundaries,
    // we will end up with various pages around, some of them with
    // overlapping ranges. Those would be very challenging to cache.

    /// Alignment requirement for file offsets (for reads)
    uint64_t disk_read_dma_alignment() const {
        return _file_impl->_disk_read_dma_alignment;
    }

    /// Alignment requirement for file offsets (for writes)
    uint64_t disk_write_dma_alignment() const {
        return _file_impl->_disk_write_dma_alignment;
    }

    /// Alignment requirement for data buffers
    uint64_t memory_dma_alignment() const {
        return _file_impl->_memory_dma_alignment;
    }


    /**
     * Perform a single DMA read operation.
     *
     * @param aligned_pos offset to begin reading at (should be aligned)
     * @param aligned_buffer output buffer (should be aligned)
     * @param aligned_len number of bytes to read (should be aligned)
     * @param pc the IO priority class under which to queue this operation
     *
     * Alignment is HW dependent but use 4KB alignment to be on the safe side as
     * explained above.
     *
     * @return number of bytes actually read
     * @throw exception in case of I/O error
     */
    template <typename CharType>
    future<size_t>
    dma_read(uint64_t aligned_pos, CharType* aligned_buffer, size_t aligned_len, const io_priority_class& pc = default_priority_class()) {
        return _file_impl->read_dma(aligned_pos, aligned_buffer, aligned_len, pc);
    }

    /**
     * Read the requested amount of bytes starting from the given offset.
     *
     * @param pos offset to begin reading from
     * @param len number of bytes to read
     * @param pc the IO priority class under which to queue this operation
     *
     * @return temporary buffer containing the requested data.
     * @throw exception in case of I/O error
     *
     * This function doesn't require any alignment for both "pos" and "len"
     *
     * @note size of the returned buffer may be smaller than "len" if EOF is
     *       reached of in case of I/O error.
     */
    template <typename CharType>
    future<temporary_buffer<CharType>> dma_read(uint64_t pos, size_t len, const io_priority_class& pc = default_priority_class()) {
        return dma_read_bulk<CharType>(pos, len, pc).then(
                [len] (temporary_buffer<CharType> buf) {
            if (len < buf.size()) {
                buf.trim(len);
            }

            return std::move(buf);
        });
    }

    /// Error thrown when attempting to read past end-of-file
    /// with \ref dma_read_exactly().
    class eof_error : public std::exception {};

    /**
     * Read the exact amount of bytes.
     *
     * @param pos offset in a file to begin reading from
     * @param len number of bytes to read
     * @param pc the IO priority class under which to queue this operation
     *
     * @return temporary buffer containing the read data
     * @throw end_of_file_error if EOF is reached, file_io_error or
     *        std::system_error in case of I/O error.
     */
    template <typename CharType>
    future<temporary_buffer<CharType>>
    dma_read_exactly(uint64_t pos, size_t len, const io_priority_class& pc = default_priority_class()) {
        return dma_read<CharType>(pos, len, pc).then(
                [pos, len] (auto buf) {
            if (buf.size() < len) {
                throw eof_error();
            }

            return std::move(buf);
        });
    }

    /// Performs a DMA read into the specified iovec.
    ///
    /// \param pos offset to read from.  Must be aligned to \ref dma_alignment.
    /// \param iov vector of address/size pairs to read into.  Addresses must be
    ///            aligned.
    /// \param pc the IO priority class under which to queue this operation
    ///
    /// \return a future representing the number of bytes actually read.  A short
    ///         read may happen due to end-of-file or an I/O error.
    future<size_t> dma_read(uint64_t pos, std::vector<iovec> iov, const io_priority_class& pc = default_priority_class()) {
        return _file_impl->read_dma(pos, std::move(iov), pc);
    }

    /// Performs a DMA write from the specified buffer.
    ///
    /// \param pos offset to write into.  Must be aligned to \ref dma_alignment.
    /// \param buffer aligned address of buffer to read from.  Buffer must exists
    ///               until the future is made ready.
    /// \param len number of bytes to write.  Must be aligned.
    /// \param pc the IO priority class under which to queue this operation
    ///
    /// \return a future representing the number of bytes actually written.  A short
    ///         write may happen due to an I/O error.
    template <typename CharType>
    future<size_t> dma_write(uint64_t pos, const CharType* buffer, size_t len, const io_priority_class& pc = default_priority_class()) {
        return _file_impl->write_dma(pos, buffer, len, pc);
    }

    /// Performs a DMA write to the specified iovec.
    ///
    /// \param pos offset to write into.  Must be aligned to \ref dma_alignment.
    /// \param iov vector of address/size pairs to write from.  Addresses must be
    ///            aligned.
    /// \param pc the IO priority class under which to queue this operation
    ///
    /// \return a future representing the number of bytes actually written.  A short
    ///         write may happen due to an I/O error.
    future<size_t> dma_write(uint64_t pos, std::vector<iovec> iov, const io_priority_class& pc = default_priority_class()) {
        return _file_impl->write_dma(pos, std::move(iov), pc);
    }

    /// Causes any previously written data to be made stable on persistent storage.
    ///
    /// Prior to a flush, written data may or may not survive a power failure.  After
    /// a flush, data is guaranteed to be on disk.
    future<> flush() {
        return _file_impl->flush();
    }

    /// Returns \c stat information about the file.
    future<struct stat> stat() {
        return _file_impl->stat();
    }

    /// Truncates the file to a specified length.
    future<> truncate(uint64_t length) {
        return _file_impl->truncate(length);
    }

    /// Preallocate disk blocks for a specified byte range.
    ///
    /// Requests the file system to allocate disk blocks to
    /// back the specified range (\c length bytes starting at
    /// \c position).  The range may be outside the current file
    /// size; the blocks can then be used when appending to the
    /// file.
    ///
    /// \param position beginning of the range at which to allocate
    ///                 blocks.
    /// \parm length length of range to allocate.
    /// \return future that becomes ready when the operation completes.
    future<> allocate(uint64_t position, uint64_t length) {
        return _file_impl->allocate(position, length);
    }

    /// Discard unneeded data from the file.
    ///
    /// The discard operation tells the file system that a range of offsets
    /// (which be aligned) is no longer needed and can be reused.
    future<> discard(uint64_t offset, uint64_t length) {
        return _file_impl->discard(offset, length);
    }

    /// Gets the file size.
    future<uint64_t> size() const {
        return _file_impl->size();
    }

    /// Closes the file.
    ///
    /// Flushes any pending operations and release any resources associated with
    /// the file (except for stable storage).
    ///
    /// \note
    /// to ensure file data reaches stable storage, you must call \ref flush()
    /// before calling \c close().
    future<> close() {
        return _file_impl->close();
    }

    /// Returns a directory listing, given that this file object is a directory.
    subscription<directory_entry> list_directory(std::function<future<> (directory_entry de)> next) {
        return _file_impl->list_directory(std::move(next));
    }

    /**
     * Read a data bulk containing the provided addresses range that starts at
     * the given offset and ends at either the address aligned to
     * dma_alignment (4KB) or at the file end.
     *
     * @param offset starting address of the range the read bulk should contain
     * @param range_size size of the addresses range
     * @param pc the IO priority class under which to queue this operation
     *
     * @return temporary buffer containing the read data bulk.
     * @throw system_error exception in case of I/O error or eof_error when
     *        "offset" is beyond EOF.
     */
    template <typename CharType>
    future<temporary_buffer<CharType>>
    dma_read_bulk(uint64_t offset, size_t range_size, const io_priority_class& pc = default_priority_class()) {
        return _file_impl->dma_read_bulk(offset, range_size, pc).then([] (temporary_buffer<uint8_t> t) {
            return temporary_buffer<CharType>(reinterpret_cast<CharType*>(t.get_write()), t.size(), t.release());
        });
    }

    /// \brief Creates a handle that can be transported across shards.
    ///
    /// Creates a handle that can be transported across shards, and then
    /// used to create a new shard-local \ref file object that refers to
    /// the same on-disk file.
    ///
    /// \note Use on read-only files.
    ///
    file_handle dup();

    template <typename CharType>
    struct read_state;
private:
    friend class reactor;
    friend class file_impl;
};

/// \brief A shard-transportable handle to a file
///
/// If you need to access a file (for reads only) across multiple shards,
/// you can use the file::dup() method to create a `file_handle`, transport
/// this file handle to another shard, and use the handle to create \ref file
/// object on that shard.  This is more efficient than calling open_file_dma()
/// again.
class file_handle {
    std::unique_ptr<file_handle_impl> _impl;
private:
    explicit file_handle(std::unique_ptr<file_handle_impl> impl) : _impl(std::move(impl)) {}
public:
    /// Copies a file handle object
    file_handle(const file_handle&);
    /// Moves a file handle object
    file_handle(file_handle&&) noexcept;
    /// Assigns a file handle object
    file_handle& operator=(const file_handle&);
    /// Move-assigns a file handle object
    file_handle& operator=(file_handle&&) noexcept;
    /// Converts the file handle object to a \ref file.
    file to_file() const &;
    /// Converts the file handle object to a \ref file.
    file to_file() &&;

    friend class file;
};

/// \cond internal

template <typename CharType>
struct file::read_state {
    typedef temporary_buffer<CharType> tmp_buf_type;

    read_state(uint64_t offset, uint64_t front, size_t to_read,
            size_t memory_alignment, size_t disk_alignment)
    : buf(tmp_buf_type::aligned(memory_alignment,
                                align_up(to_read, disk_alignment)))
    , _offset(offset)
    , _to_read(to_read)
    , _front(front) {}

    bool done() const {
        return eof || pos >= _to_read;
    }

    /**
     * Trim the buffer to the actual number of read bytes and cut the
     * bytes from offset 0 till "_front".
     *
     * @note this function has to be called only if we read bytes beyond
     *       "_front".
     */
    void trim_buf_before_ret() {
        if (have_good_bytes()) {
            buf.trim(pos);
            buf.trim_front(_front);
        } else {
            buf.trim(0);
        }
    }

    uint64_t cur_offset() const {
        return _offset + pos;
    }

    size_t left_space() const {
        return buf.size() - pos;
    }

    size_t left_to_read() const {
        // positive as long as (done() == false)
        return _to_read - pos;
    }

    void append_new_data(tmp_buf_type& new_data) {
        auto to_copy = std::min(left_space(), new_data.size());

        std::memcpy(buf.get_write() + pos, new_data.get(), to_copy);
        pos += to_copy;
    }

    bool have_good_bytes() const {
        return pos > _front;
    }

public:
    bool         eof      = false;
    tmp_buf_type buf;
    size_t       pos      = 0;
private:
    uint64_t     _offset;
    size_t       _to_read;
    uint64_t     _front;
};

/// \endcond

/// @}

}