kurtiman
Follow
RF
Build a SDR SW/MW/LW Receiver with a Raspberry Pi Pico
RF tool based on CC1101 module and Arduino Pro Micro 8VMHz/3.3V. Allows using CLI with human readable commands to control CC1101 board over USB interface. Putty or any other serial terminal can be …
Play with Sub1Ghz signals (300-348MHz, 387-464MHz, 779-928MHz). Scan, decode, store. Garage doors, barriers, IoT sensors...
ESPboy Sub1GhzScaner using CC1101 module
Universal Radio Hacker: Investigate Wireless Protocols Like A Boss
Arduino code to control a generic ceiling fan with the CC1101 transceiver.
RF remote based on RP2040 and CC1101. For those sub-gigahertz remotes laying around.
Multi tool RF hack - Esp32 - cc1101 - Oled 8x7
A cybersecurity tool for RF scanning, copying, and replaying signals
Program to decode radio transmissions from devices on the ISM bands (and other frequencies)
Arduino code to sniff and decode Acurite 00592TX remote wireless temperature probe
All-in-One Gadget for Dominating BLE and 2.4GHz Networks
My ESPHome config for the Sonoff RF Bridge
Trial port of the rtl_433 Library for use with OpenMQTTGateway on a ESP32 and a CC1101 Transceiver
Control Star ceiling-fan using Raspberry Pi and CC1101 Transceiver
MQTT / RF Bridge for Hampton Bay Fan control
NodeMCU ESP8266 CC1101 Sub1GHz OOK transmitter & brute forcer w/ pre-saved signals (e.g. TouchTunes Jukebox)
Arduino library for interfacing with CC1101 transceivers.
Universal wireless communication library for embedded devices
An all-in-one remote based on the ESP32-WROOM-32E
Receive temperature data with MicroPython from ThermoPro TP65s temperature sensor for microcontrollers.