How to Make a Computer Operating System in C++

Embedded graphics library to create beautiful UIs for any MCU, MPU and display type.

RIOT - The friendly OS for IoT

Jsmn is a world fastest JSON parser/tokenizer. This is the official repo replacing the old one at Bitbucket

Clean-code version of the baseflight flight controller firmware

Paho MQTT C client library for embedded systems. Paho is an Eclipse IoT project (https://iot.eclipse.org/)

CMake for stm32 developing.

STM32 stuff

Firmware patches for the TYT-MD380 handheld radio.

Eclipse Wakaama is a C implementation of the Open Mobile Alliance's LightWeight M2M protocol (LwM2M).

Access the data of 3-axis magnetometer and DMP from MPU9250 with SPI interface, All data fusion via EKF/UKF/CKF/SRCKF algorithm

Platform independent, ANSI C AT commands parser for SIMcom GSM modules

Simple C examples for Decawave DWM1001 hardware

A Build Template for the STM32 Processor

Some usefull libraries for STM32

This project is an example of IAP Bootloader with UART. Now is using in stm32f107vct6 chip and Keil MDK-Arm uvision5.

STM32 Cube library - CMSIS and HAL for F4, F7 and L4 microcontrollers

stm32 example project

CLI util to convert images in various formats to C arrays in various bit depths

Example on how to run Eclipse Wakaama on the MBED.org platform

Minimal stm32 project build with cmake. It's tested together with nucleo-L053R8 board

Driver and device tree overlay for TI BQ25622 charger IC on Raspberry PI

MPLab Frimware project for MrHat PIC MCU