dcloud.bootcamp.assessment.lab.virl

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.95" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.95/virl.xsd">
    <extensions>
        <entry key="lxc.node.static_ip" type="String">198.18.1.99</entry>
        <entry key="AutoNetkit.infrastructure_only" type="Boolean">true</entry>
        <entry key="lxc.host.static_ip" type="String">198.18.1.100</entry>
        <entry key="management_network" type="String">flat</entry>
    </extensions>
    <node name="R1" type="SIMPLE" subtype="IOSv" location="1001,321">
        <extensions>
            <entry key="static_ip" type="String">198.18.1.101</entry>
            <entry key="static_serial_port_0" type="Integer">11001</entry>
            <entry key="AutoNetkit.mgmt_ip" type="String"></entry>
            <entry key="config" type="String">!
! Last configuration change at 13:14:28 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$XHtl$P5i0JxmgmSVPUVrAB9Oxq.
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.1.1.1 255.255.255.255
 ip ospf 1 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.101 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R2
 ip address 184.17.12.0 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/2
 description to R3
 ip address 184.17.12.2 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/3
 description to R4
 ip address 184.17.12.4 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/4
 description to R5
 ip address 184.17.12.6 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/5
 description to R6
 ip address 184.17.12.8 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
router ospf 1
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
        <interface id="3" name="GigabitEthernet0/4"/>
        <interface id="4" name="GigabitEthernet0/5"/>
    </node>
    <node name="R2" type="SIMPLE" subtype="IOSv" location="908,220">
        <extensions>
            <entry key="static_ip" type="String">198.18.1.102</entry>
            <entry key="static_serial_port_0" type="Integer">11002</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="config" type="String">!
! Last configuration change at 18:14:43 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2
!
boot-start-marker
boot-end-marker
!
!
vrf definition BRANCH-SITE-1
 rd 10.2.2.2:172
 route-target export 10.2.2.2:172
 route-target import 10.4.4.4:172
 route-target import 10.3.3.3:172
 route-target import 10.5.5.5:172
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
vrf definition ISP-C
 rd 10.2.2.2:1282
 route-target export 10.2.2.2:1282
 route-target export 18417:1000
 route-target import 18417:1000
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$NA5J$CG086YPAujBosht/faqf20
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.2.2.2 255.255.255.128
 ip ospf 1 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.102 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R1
 ip address 184.17.12.1 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/2
 description to R12
 vrf forwarding ISP-C
 ip address 12.18.255.3 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::3/127
!
interface GigabitEthernet0/3
 description to R15
 vrf forwarding BRANCH-SITE-1
 ip address 184.17.13.1 255.255.255.252
 ip ospf 15 area 15
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::1/126
 ospfv3 15 ipv6 area 15
!
router ospfv3 15
 !
 address-family ipv6 unicast
 exit-address-family
 !
 address-family ipv6 unicast vrf BRANCH-SITE-1
  redistribute bgp 18417 metric 20
 exit-address-family
!
router ospf 15 vrf BRANCH-SITE-1
 redistribute bgp 18417 subnets
!
router ospf 1
!
router ospf 2
!
router bgp 18417
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 10.6.6.6 remote-as 18417
 neighbor 10.6.6.6 password 18417beegeepeep4ss
 neighbor 10.6.6.6 update-source Loopback0
 !
 address-family ipv4
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 next-hop-self
 exit-address-family
 !
 address-family vpnv4
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 send-community extended
 exit-address-family
 !
 address-family vpnv6
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf BRANCH-SITE-1
  redistribute ospf 15
 exit-address-family
 !
 address-family ipv6 vrf BRANCH-SITE-1
  redistribute ospf 15 include-connected
 exit-address-family
 !
 address-family ipv4 vrf ISP-C
  redistribute connected
  neighbor 12.18.255.2 remote-as 786514
  neighbor 12.18.255.2 ttl-security hops 1
  neighbor 12.18.255.2 activate
 exit-address-family
 !
 address-family ipv6 vrf ISP-C
  redistribute connected
  neighbor 2001:12:18:255::2 remote-as 786514
  neighbor 2001:12:18:255::2 ttl-security hops 1
  neighbor 2001:12:18:255::2 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="R3" type="SIMPLE" subtype="IOSv" location="909,391">
        <extensions>
            <entry key="static_ip" type="String">198.18.1.103</entry>
            <entry key="static_serial_port_0" type="Integer">11003</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="config" type="String">!
! Last configuration change at 12:58:52 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R3
!
boot-start-marker
boot-end-marker
!
!
vrf definition HQ-SITE-1
 rd 10.3.3.3:172
 route-target export 10.3.3.3:172
 route-target import 10.2.2.2:172
 route-target import 10.4.4.4:172
 route-target import 10.5.5.5:172
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
vrf definition ISP-C
 rd 10.3.3.3:1282
 route-target export 10.3.3.3:1282
 route-target export 18417:1000
 route-target import 18417:1000
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
vrf definition REMOTE-SITE-2
 rd 18417:8593
 route-target export 10.3.3.3:8593
 route-target export 18417:1000
 route-target import 18417:1000
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$yWBz$JdSRtknG9Yq3TOBhYNAGf/
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.3.3.3 255.255.255.255
 ip ospf 1 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.103 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R1
 ip address 184.17.12.3 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/2
 description to R14
 vrf forwarding REMOTE-SITE-2
 ip address 184.17.13.25 255.255.255.252
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::25/126
!
interface GigabitEthernet0/3
 description to R12
 vrf forwarding ISP-C
 ip address 12.18.255.1 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::1/127
!
interface GigabitEthernet0/4
 description to R18
 vrf forwarding HQ-SITE-1
 ip address 184.17.13.9 255.255.255.252
 ip ospf 3 area 0
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::9/127
 ospfv3 3 ipv6 area 0
!
router ospfv3 3
 !
 address-family ipv6 unicast
 exit-address-family
 !
 address-family ipv6 unicast vrf HQ-SITE-1
  redistribute bgp 18417
 exit-address-family
!
router ospf 3 vrf HQ-SITE-1
 redistribute bgp 18417 subnets
!
router ospf 1
!
router bgp 18417
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 10.6.6.6 remote-as 18417
 neighbor 10.6.6.6 password 18417beegeepeep4ss
 neighbor 10.6.6.6 update-source Loopback0
 !
 address-family ipv4
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 next-hop-self
 exit-address-family
 !
 address-family vpnv4
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 send-community extended
 exit-address-family
 !
 address-family vpnv6
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf HQ-SITE-1
  redistribute ospf 3
 exit-address-family
 !
 address-family ipv6 vrf HQ-SITE-1
  redistribute ospf 3 include-connected
 exit-address-family
 !
 address-family ipv4 vrf ISP-C
  redistribute connected
  neighbor 12.18.255.0 remote-as 12.82
  neighbor 12.18.255.0 ttl-security hops 1
  neighbor 12.18.255.0 activate
 exit-address-family
 !
 address-family ipv6 vrf ISP-C
  redistribute connected
  neighbor 2001:12:18:255:: remote-as 12.82
  neighbor 2001:12:18:255:: ttl-security hops 1
  neighbor 2001:12:18:255:: activate
 exit-address-family
 !
 address-family ipv4 vrf REMOTE-SITE-2
  redistribute connected
  neighbor 184.17.13.26 remote-as 8593.2
  neighbor 184.17.13.26 activate
  neighbor 184.17.13.26 default-originate
  neighbor 184.17.13.26 route-map V4-DEFAULT-ONLY out
 exit-address-family
 !
 address-family ipv6 vrf REMOTE-SITE-2
  redistribute connected
  neighbor 2001:184:17:13::26 remote-as 8593.2
  neighbor 2001:184:17:13::26 activate
  neighbor 2001:184:17:13::26 default-originate
  neighbor 2001:184:17:13::26 route-map V6-DEFAULT-ONLY out
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
!
ip prefix-list V4-DEFAULT seq 5 permit 0.0.0.0/0
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
ipv6 prefix-list V6-DEFAULT seq 5 permit ::/0
route-map V4-DEFAULT-ONLY permit 10
 match ip address prefix-list V4-DEFAULT
!
route-map V6-DEFAULT-ONLY permit 20
 match ipv6 address prefix-list V6-DEFAULT
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
        <interface id="3" name="GigabitEthernet0/4"/>
    </node>
    <node name="R4" type="SIMPLE" subtype="IOSv" location="1090,221">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.104</entry>
            <entry key="static_serial_port_0" type="Integer">11004</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:36:36 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R4
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
vrf definition PRIMARY-DC
 rd 10.4.4.4:8593
 route-target export 10.4.4.4:8593
 route-target export 18417:1000
 route-target import 18417:1000
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$szQP$deS4xJkNaFnxsQ9XqGsJg/
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.4.4.4 255.255.255.255
 ip ospf 1 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.104 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R1
 ip address 184.17.12.5 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/2
 description to R16
 ip address 184.17.13.5 255.255.255.252
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::5/64
!
interface GigabitEthernet0/3
 description to R24
 vrf forwarding PRIMARY-DC
 ip address 184.17.13.17 255.255.255.252
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::17/64
!
router ospfv3 16
 !
 address-family ipv6 unicast
 exit-address-family
!
router ospf 1
!
router bgp 18417
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 10.6.6.6 remote-as 18417
 neighbor 10.6.6.6 password 18417beegeepeep4ss
 neighbor 10.6.6.6 update-source Loopback0
 !
 address-family ipv4
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 next-hop-self
 exit-address-family
 !
 address-family vpnv4
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 send-community extended
 exit-address-family
 !
 address-family vpnv6
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf PRIMARY-DC
  redistribute connected
  neighbor 184.17.13.18 remote-as 8593.1
  neighbor 184.17.13.18 activate
 exit-address-family
 !
 address-family ipv6 vrf PRIMARY-DC
  redistribute connected
  neighbor 2001:184:17:13::18 remote-as 8593.1
  neighbor 2001:184:17:13::18 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="R5" type="SIMPLE" subtype="IOSv" location="1096,385">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.105</entry>
            <entry key="static_serial_port_0" type="Integer">11005</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:59:02 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R5
!
boot-start-marker
boot-end-marker
!
!
vrf definition HQ-SITE-1
 rd 10.5.5.5:172
 route-target export 10.5.5.5:172
 route-target import 10.2.2.2:172
 route-target import 10.4.4.4:172
 route-target import 10.3.3.3:172
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
vrf definition PRIMARY-DC
 rd 10.5.5.5:8593
 route-target export 10.5.5.5:8593
 route-target export 18417:1000
 route-target import 18417:1000
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$HCjf$jsD8fy6sDW29BU.HD6MF30
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.5.5.5 255.255.255.255
 ip ospf 1 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.105 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R1
 ip address 184.17.12.7 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
interface GigabitEthernet0/2
 description to R25
 vrf forwarding PRIMARY-DC
 ip address 184.17.13.21 255.255.255.252
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:113::21/64
!
interface GigabitEthernet0/3
 description to R19
 vrf forwarding HQ-SITE-1
 ip address 184.17.13.13 255.255.255.252
 ip ospf 3 area 0
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::D/127
 ospfv3 3 ipv6 area 0
!
router ospfv3 3
 !
 address-family ipv6 unicast
 exit-address-family
 !
 address-family ipv6 unicast vrf HQ-SITE-1
  redistribute bgp 18417
 exit-address-family
!
router ospf 3 vrf HQ-SITE-1
 redistribute bgp 18417 subnets
!
router ospf 1
!
router bgp 18417
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 10.6.6.6 remote-as 18417
 neighbor 10.6.6.6 password 18417beegeepeep4ss
 neighbor 10.6.6.6 update-source Loopback0
 !
 address-family ipv4
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 next-hop-self
 exit-address-family
 !
 address-family vpnv4
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 send-community extended
 exit-address-family
 !
 address-family vpnv6
  neighbor 10.6.6.6 activate
  neighbor 10.6.6.6 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf HQ-SITE-1
  redistribute ospf 3
 exit-address-family
 !
 address-family ipv6 vrf HQ-SITE-1
  redistribute ospf 3 include-connected
 exit-address-family
 !
 address-family ipv4 vrf PRIMARY-DC
  redistribute connected
  neighbor 184.17.13.22 remote-as 8593.1
  neighbor 184.17.13.22 activate
 exit-address-family
 !
 address-family ipv6 vrf PRIMARY-DC
  redistribute connected
  neighbor 2001:184:17:113::22 remote-as 8593.1
  neighbor 2001:184:17:113::22 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="R6" type="SIMPLE" subtype="IOSv" location="1003,220">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.106</entry>
            <entry key="static_serial_port_0" type="Integer">11006</entry>
            <entry key="config" type="String">!
! Last configuration change at 13:10:55 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R6
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$38DN$S5VJsxgTqtJ/YIhYAbg7b1
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.6.6.6 255.255.255.255
 ip ospf 1 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.106 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R1
 ip address 184.17.12.9 255.255.255.254
 ip ospf 1 area 0
 duplex full
 speed auto
 media-type rj45
 mpls ip
!
router ospf 1
!
router bgp 18417
 template peer-policy AS18417_IPV4
  route-reflector-client
 exit-peer-policy
 !
 template peer-policy AS18417_VPNV4
  route-reflector-client
 exit-peer-policy
 !
 template peer-session AS18417
  remote-as 18417
  password 18417beegeepeep4ss
  update-source Loopback0
 exit-peer-session
 !
 bgp log-neighbor-changes
 neighbor 10.2.2.2 inherit peer-session AS18417
 neighbor 10.3.3.3 inherit peer-session AS18417
 neighbor 10.4.4.4 inherit peer-session AS18417
 neighbor 10.5.5.5 inherit peer-session AS18417
 !
 address-family ipv4
  neighbor 10.2.2.2 activate
  neighbor 10.2.2.2 inherit peer-policy AS18417_IPV4
  neighbor 10.3.3.3 activate
  neighbor 10.3.3.3 inherit peer-policy AS18417_IPV4
  neighbor 10.4.4.4 activate
  neighbor 10.4.4.4 send-community extended
  neighbor 10.4.4.4 inherit peer-policy AS18417_IPV4
  neighbor 10.5.5.5 activate
  neighbor 10.5.5.5 inherit peer-policy AS18417_IPV4
 exit-address-family
 !
 address-family vpnv4
  neighbor 10.2.2.2 activate
  neighbor 10.2.2.2 send-community extended
  neighbor 10.2.2.2 inherit peer-policy AS18417_VPNV4
  neighbor 10.3.3.3 activate
  neighbor 10.3.3.3 send-community extended
  neighbor 10.3.3.3 inherit peer-policy AS18417_VPNV4
  neighbor 10.4.4.4 activate
  neighbor 10.4.4.4 send-community extended
  neighbor 10.4.4.4 inherit peer-policy AS18417_VPNV4
  neighbor 10.5.5.5 activate
  neighbor 10.5.5.5 send-community extended
  neighbor 10.5.5.5 inherit peer-policy AS18417_VPNV4
 exit-address-family
 !
 address-family vpnv6
  neighbor 10.2.2.2 activate
  neighbor 10.2.2.2 send-community extended
  neighbor 10.2.2.2 inherit peer-policy AS18417_VPNV4
  neighbor 10.3.3.3 activate
  neighbor 10.3.3.3 send-community extended
  neighbor 10.3.3.3 inherit peer-policy AS18417_VPNV4
  neighbor 10.4.4.4 activate
  neighbor 10.4.4.4 send-community extended
  neighbor 10.4.4.4 inherit peer-policy AS18417_VPNV4
  neighbor 10.5.5.5 activate
  neighbor 10.5.5.5 send-community extended
  neighbor 10.5.5.5 inherit peer-policy AS18417_VPNV4
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R7" type="SIMPLE" subtype="IOSv" location="1254,33">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.107</entry>
            <entry key="static_serial_port_0" type="Integer">11007</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:59:16 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R7
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$Szb5$VOF05olVGqzTk00ZtQXVx.
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.7.7.7 255.255.255.255
 ipv6 address 2001:10:7:7:7::7/128
 ospfv3 1 ipv4 area 0
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.107 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R8
 ip address 29.11.1.1 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:29:11:1::1/127
 ospfv3 1 ipv4 area 0
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/2
 description to R12
 ip address 12.18.255.5 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::5/127
!
router ospfv3 1
 !
 address-family ipv4 unicast
 exit-address-family
 !
 address-family ipv6 unicast
 exit-address-family
!
router bgp 1101
 template peer-policy IBGP-MESH
  weight 55555
  next-hop-self
 exit-peer-policy
 !
 template peer-session IBGP-MESH
  remote-as 1101
  password 1101-IBGP-MESH
  update-source Loopback0
 exit-peer-session
 !
 bgp asnotation dot
 bgp log-neighbor-changes
 neighbor 10.8.8.8 inherit peer-session IBGP-MESH
 neighbor 10.9.9.9 inherit peer-session IBGP-MESH
 neighbor 10.10.10.10 inherit peer-session IBGP-MESH
 neighbor 12.18.255.4 remote-as 12.82
 neighbor 12.18.255.4 ttl-security hops 1
 !
 address-family ipv4
  redistribute connected
  neighbor 10.8.8.8 activate
  neighbor 10.8.8.8 inherit peer-policy IBGP-MESH
  neighbor 10.9.9.9 activate
  neighbor 10.9.9.9 inherit peer-policy IBGP-MESH
  neighbor 10.10.10.10 activate
  neighbor 10.10.10.10 inherit peer-policy IBGP-MESH
  neighbor 12.18.255.4 activate
 exit-address-family
 !
 address-family ipv6
  redistribute connected
  neighbor 10.8.8.8 activate
  neighbor 10.8.8.8 inherit peer-policy IBGP-MESH
  neighbor 10.8.8.8 weight 55555
  neighbor 10.8.8.8 route-map IPV6-NEXT-HOP out
  neighbor 10.9.9.9 activate
  neighbor 10.9.9.9 inherit peer-policy IBGP-MESH
  neighbor 10.9.9.9 weight 55555
  neighbor 10.9.9.9 route-map IPV6-NEXT-HOP out
  neighbor 10.10.10.10 activate
  neighbor 10.10.10.10 inherit peer-policy IBGP-MESH
  neighbor 10.10.10.10 weight 55555
  neighbor 10.10.10.10 route-map IPV6-NEXT-HOP out
  neighbor 12.18.255.4 activate
  neighbor 12.18.255.4 route-map TO-ISP-C out
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
route-map TO-ISP-C permit 10
 set ipv6 next-hop 2001:12:18:255::5
!
route-map IPV6-NEXT-HOP permit 10
 set ipv6 next-hop 2001:10:7:7:7::7
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="R8" type="SIMPLE" subtype="IOSv" location="1365,30">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.108</entry>
            <entry key="static_serial_port_0" type="Integer">11008</entry>
            <entry key="config" type="String">!
! Last configuration change at 17:59:02 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R8
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$Vdyh$My5M5ifGZXMqJGcRVP1YG1
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.8.8.8 255.255.255.255
 ipv6 address 2001:10:8:8:8::8/128
 ospfv3 1 ipv4 area 0
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.108 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R7
 ip address 29.11.1.0 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:29:11:1::/127
 ospfv3 1 ipv4 area 0
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/2
 description to R9
 ip address 29.11.1.2 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:29:11:1::2/127
 ospfv3 1 ipv6 area 0
 ospfv3 1 ipv4 area 0
!
interface GigabitEthernet0/3
 description to R10
 ip address 29.11.1.4 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:29:11:1::4/127
 ospfv3 1 ipv4 area 0
 ospfv3 1 ipv6 area 0
!
router ospfv3 1
 !
 address-family ipv4 unicast
 exit-address-family
 !
 address-family ipv6 unicast
 exit-address-family
!
router bgp 1101
 template peer-policy IBGP-MESH
  weight 55555
  next-hop-self
 exit-peer-policy
 !
 template peer-session IBGP-MESH
  remote-as 1101
  password 1101-IBGP-MESH
  update-source Loopback0
 exit-peer-session
 !
 bgp asnotation dot
 bgp log-neighbor-changes
 neighbor 10.7.7.7 inherit peer-session IBGP-MESH
 neighbor 10.9.9.9 inherit peer-session IBGP-MESH
 neighbor 10.10.10.10 inherit peer-session IBGP-MESH
 !
 address-family ipv4
  redistribute connected
  neighbor 10.7.7.7 activate
  neighbor 10.7.7.7 inherit peer-policy IBGP-MESH
  neighbor 10.9.9.9 activate
  neighbor 10.9.9.9 inherit peer-policy IBGP-MESH
  neighbor 10.10.10.10 activate
  neighbor 10.10.10.10 inherit peer-policy IBGP-MESH
 exit-address-family
 !
 address-family ipv6
  redistribute connected
  neighbor 10.7.7.7 activate
  neighbor 10.7.7.7 inherit peer-policy IBGP-MESH
  neighbor 10.7.7.7 weight 55555
  neighbor 10.7.7.7 route-map IPV6-NEXT-HOP out
  neighbor 10.9.9.9 activate
  neighbor 10.9.9.9 inherit peer-policy IBGP-MESH
  neighbor 10.9.9.9 weight 55555
  neighbor 10.9.9.9 route-map IPV6-NEXT-HOP out
  neighbor 10.10.10.10 activate
  neighbor 10.10.10.10 inherit peer-policy IBGP-MESH
  neighbor 10.10.10.10 weight 55555
  neighbor 10.10.10.10 route-map IPV6-NEXT-HOP out
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
route-map IPV6-NEXT-HOP permit 10
 set ipv6 next-hop 2001:10:8:8:8::8
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="R9" type="SIMPLE" subtype="IOSv" location="1481,28">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.109</entry>
            <entry key="static_serial_port_0" type="Integer">11009</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:16:13 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R9
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$fKbJ$2WcDPd0zTZ9usqEkc2abM.
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.9.9.9 255.255.255.255
 ipv6 address 2001:10:9:9:9::9/128
 ospfv3 1 ipv4 area 0
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.109 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R8
 ip address 29.11.1.3 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:29:11:1::3/127
 ospfv3 1 ipv4 area 0
 ospfv3 1 ipv4 network point-to-point
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/2
 description to R24
 ip address 29.11.1.6 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:29:11:1::6/127
!
router ospfv3 1
 !
 address-family ipv4 unicast
 exit-address-family
 !
 address-family ipv6 unicast
 exit-address-family
!
router bgp 1101
 template peer-policy IBGP-MESH
  weight 55555
  next-hop-self
 exit-peer-policy
 !
 template peer-session IBGP-MESH
  remote-as 1101
  password 1101-IBGP-MESH
  update-source Loopback0
 exit-peer-session
 !
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 10.7.7.7 inherit peer-session IBGP-MESH
 neighbor 10.8.8.8 inherit peer-session IBGP-MESH
 neighbor 10.10.10.10 inherit peer-session IBGP-MESH
 neighbor 29.11.1.7 remote-as 8593.1
 neighbor 2001:29:11:1::7 remote-as 8593.1
 !
 address-family ipv4
  redistribute connected
  neighbor 10.7.7.7 activate
  neighbor 10.7.7.7 inherit peer-policy IBGP-MESH
  neighbor 10.8.8.8 activate
  neighbor 10.8.8.8 inherit peer-policy IBGP-MESH
  neighbor 10.10.10.10 activate
  neighbor 10.10.10.10 inherit peer-policy IBGP-MESH
  neighbor 29.11.1.7 activate
  neighbor 29.11.1.7 route-map R9 out
 exit-address-family
 !
 address-family ipv6
  redistribute connected
  neighbor 10.7.7.7 activate
  neighbor 10.7.7.7 inherit peer-policy IBGP-MESH
  neighbor 10.7.7.7 weight 55555
  neighbor 10.7.7.7 route-map IPV6-NEXT-HOP out
  neighbor 10.8.8.8 activate
  neighbor 10.8.8.8 inherit peer-policy IBGP-MESH
  neighbor 10.8.8.8 weight 55555
  neighbor 10.8.8.8 route-map IPV6-NEXT-HOP out
  neighbor 10.10.10.10 activate
  neighbor 10.10.10.10 inherit peer-policy IBGP-MESH
  neighbor 10.10.10.10 weight 55555
  neighbor 10.10.10.10 route-map IPV6-NEXT-HOP out
  neighbor 2001:29:11:1::7 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
route-map IPV6-NEXT-HOP permit 10
 set ipv6 next-hop 2001:10:9:9:9::9
!
route-map R9 permit 10
 set ip next-hop 10.9.9.9
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="R10" type="SIMPLE" subtype="IOSv" location="1363,131">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.110</entry>
            <entry key="static_serial_port_0" type="Integer">11010</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:56:56 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R10
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$TzED$UxUax3BS0euxm21OzQ.600
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.10.10.10 255.255.255.255
 ipv6 address 2001:10:10:10:10::10/128
 ospfv3 1 ipv6 area 0
 ospfv3 1 ipv4 area 0
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.110 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R8
 ip address 29.11.1.5 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:29:11:1::5/127
 ospfv3 1 ipv4 area 0
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/2
 description to R11
 ip address 167.22.2.1 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:167:22:2::1/127
!
router ospfv3 1
 !
 address-family ipv4 unicast
 exit-address-family
 !
 address-family ipv6 unicast
 exit-address-family
!
router bgp 1101
 template peer-policy IBGP-MESH
  weight 55555
  next-hop-self
 exit-peer-policy
 !
 template peer-session IBGP-MESH
  remote-as 1101
  password 1101-IBGP-MESH
  update-source Loopback0
 exit-peer-session
 !
 bgp asnotation dot
 bgp log-neighbor-changes
 neighbor 10.7.7.7 inherit peer-session IBGP-MESH
 neighbor 10.8.8.8 inherit peer-session IBGP-MESH
 neighbor 10.9.9.9 inherit peer-session IBGP-MESH
 neighbor 167.22.2.0 remote-as 2202
 neighbor 167.22.2.0 ttl-security hops 1
 !
 address-family ipv4
  redistribute connected
  neighbor 10.7.7.7 activate
  neighbor 10.7.7.7 inherit peer-policy IBGP-MESH
  neighbor 10.8.8.8 activate
  neighbor 10.8.8.8 inherit peer-policy IBGP-MESH
  neighbor 10.9.9.9 activate
  neighbor 10.9.9.9 inherit peer-policy IBGP-MESH
  neighbor 167.22.2.0 activate
 exit-address-family
 !
 address-family ipv6
  redistribute connected
  neighbor 10.7.7.7 activate
  neighbor 10.7.7.7 inherit peer-policy IBGP-MESH
  neighbor 10.7.7.7 weight 55555
  neighbor 10.7.7.7 route-map IPV6-NEXT-HOP out
  neighbor 10.8.8.8 activate
  neighbor 10.8.8.8 inherit peer-policy IBGP-MESH
  neighbor 10.8.8.8 weight 55555
  neighbor 10.8.8.8 route-map IPV6-NEXT-HOP out
  neighbor 10.9.9.9 activate
  neighbor 10.9.9.9 inherit peer-policy IBGP-MESH
  neighbor 10.9.9.9 weight 55555
  neighbor 10.9.9.9 route-map IPV6-NEXT-HOP out
  neighbor 167.22.2.0 activate
  neighbor 167.22.2.0 route-map TO-ISP-B out
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
route-map TO-ISP-B permit 10
 set ipv6 next-hop 2001:167:22:2::1
!
route-map IPV6-NEXT-HOP permit 10
 set ipv6 next-hop 2001:10:10:10:10::10
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="R11" type="SIMPLE" subtype="IOSv" location="1315,322">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.111</entry>
            <entry key="static_serial_port_0" type="Integer">11011</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:57:05 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R11
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$oaI3$kDqhT/qjBs0di10E5IHyY0
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.11.11.11 255.255.255.255
 ipv6 address 2001:10:11:11:11::11/128
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.111 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R21
 ip address 167.22.2.2 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:167:22:2::2/127
!
interface GigabitEthernet0/2
 description to R10
 ip address 167.22.2.0 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:167:22:2::/127
!
interface GigabitEthernet0/3
 description to R25
 ip address 167.22.2.4 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:167:22:2::4/127
!
interface GigabitEthernet0/4
 description to R12
 ip address 12.18.255.9 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::9/127
!
router bgp 2202
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 12.18.255.8 remote-as 12.82
 neighbor 12.18.255.8 ttl-security hops 1
 neighbor 2001:167:22:2::3 remote-as 8593.3
 neighbor 2001:167:22:2::5 remote-as 8593.1
 neighbor 167.22.2.1 remote-as 1101
 neighbor 167.22.2.1 ttl-security hops 1
 neighbor 167.22.2.3 remote-as 8593.3
 neighbor 167.22.2.5 remote-as 8593.1
 !
 address-family ipv4
  redistribute connected
  neighbor 12.18.255.8 activate
  neighbor 167.22.2.1 activate
  neighbor 167.22.2.3 activate
  neighbor 167.22.2.3 default-originate
  neighbor 167.22.2.3 route-map V4-DEFAULT-ONLY out
  neighbor 167.22.2.5 activate
 exit-address-family
 !
 address-family ipv6
  redistribute connected
  neighbor 12.18.255.8 activate
  neighbor 12.18.255.8 route-map TO-ISP-C out
  neighbor 2001:167:22:2::3 activate
  neighbor 2001:167:22:2::3 default-originate
  neighbor 2001:167:22:2::3 route-map V6-DEFAULT-ONLY out
  neighbor 2001:167:22:2::5 activate
  neighbor 167.22.2.1 activate
  neighbor 167.22.2.1 route-map TO-ISP-A out
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
!
ip prefix-list V4-DEFAULT seq 5 permit 0.0.0.0/0
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
ipv6 prefix-list V6-DEFAULT seq 5 permit ::/0
route-map TO-ISP-A permit 10
 set ipv6 next-hop 2001:167:22:2::
!
route-map TO-ISP-C permit 10
 set ipv6 next-hop 2001:12:18:255::9
!
route-map V4-DEFAULT-ONLY permit 10
 match ip address prefix-list V4-DEFAULT
!
route-map V6-DEFAULT-ONLY permit 20
 match ipv6 address prefix-list V6-DEFAULT
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
        <interface id="3" name="GigabitEthernet0/4"/>
    </node>
    <node name="R12" type="SIMPLE" subtype="IOSv" location="704,211">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.112</entry>
            <entry key="static_serial_port_0" type="Integer">11012</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:42:15 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R12
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$PuwN$HJrpYfaCTsTGMbxDYg5fU1
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.12.12.12 255.255.255.255
 ipv6 address 2001:10:12:12:12::12/128
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.112 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R3
 ip address 12.18.255.0 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::/127
!
interface GigabitEthernet0/2
 description to R2
 ip address 12.18.255.2 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::2/127
!
interface GigabitEthernet0/3
 description to R7
 ip address 12.18.255.4 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::4/127
!
interface GigabitEthernet0/4
 description to R13
 ip address 12.18.255.6 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::6/127
!
interface GigabitEthernet0/5
 description to R11
 ip address 12.18.255.8 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::8/127
!
router bgp 12.82
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 12.18.255.1 remote-as 18417
 neighbor 12.18.255.1 ttl-security hops 1
 neighbor 12.18.255.3 remote-as 18417
 neighbor 12.18.255.3 ttl-security hops 1
 neighbor 12.18.255.5 remote-as 1101
 neighbor 12.18.255.5 ttl-security hops 1
 neighbor 12.18.255.7 remote-as 8593.1
 neighbor 12.18.255.9 remote-as 2202
 neighbor 12.18.255.9 ttl-security hops 1
 neighbor 2001:12:18:255::1 remote-as 18417
 neighbor 2001:12:18:255::1 ttl-security hops 1
 neighbor 2001:12:18:255::3 remote-as 18417
 neighbor 2001:12:18:255::3 ttl-security hops 1
 neighbor 2001:12:18:255::7 remote-as 8593.1
 !
 address-family ipv4
  redistribute connected
  neighbor 12.18.255.1 activate
  neighbor 12.18.255.3 activate
  neighbor 12.18.255.5 activate
  neighbor 12.18.255.7 activate
  neighbor 12.18.255.7 default-originate
  neighbor 12.18.255.7 route-map V4-DEFAULT-ONLY out
  neighbor 12.18.255.9 activate
 exit-address-family
 !
 address-family ipv6
  redistribute connected
  aggregate-address 2001:12:18:255::/125 summary-only
  neighbor 12.18.255.5 activate
  neighbor 12.18.255.5 route-map TO-ISP-A out
  neighbor 12.18.255.9 activate
  neighbor 12.18.255.9 route-map TO-ISP-B out
  neighbor 2001:12:18:255::1 activate
  neighbor 2001:12:18:255::3 activate
  neighbor 2001:12:18:255::7 activate
  neighbor 2001:12:18:255::7 default-originate
  neighbor 2001:12:18:255::7 route-map V6-DEFAULT-ONLY out
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
!
ip prefix-list 12 seq 5 permit 12.18.255.0/24 le 32
!
ip prefix-list V4-DEFAULT seq 5 permit 0.0.0.0/0
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
ipv6 prefix-list 12 seq 5 permit 2001:12:18:255::/125 le 128
!
ipv6 prefix-list V6-DEFAULT seq 5 permit ::/0
route-map TO-ISP-A permit 10
 set ipv6 next-hop 2001:12:18:255::4
!
route-map TO-ISP-B permit 10
 set ipv6 next-hop 2001:12:18:255::8
!
route-map V4-DEFAULT-ONLY permit 10
 match ip address prefix-list V4-DEFAULT
!
route-map V6-DEFAULT-ONLY permit 20
 match ipv6 address prefix-list V6-DEFAULT
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
        <interface id="3" name="GigabitEthernet0/4"/>
        <interface id="4" name="GigabitEthernet0/5"/>
    </node>
    <node name="R13" type="SIMPLE" subtype="IOSv" location="705,42">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.113</entry>
            <entry key="static_serial_port_0" type="Integer">11013</entry>
            <entry key="config" type="String">!
! Last configuration change at 13:15:08 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R13
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$RaaQ$iJaI7/RGblAZmDf/fP95n0
!
redundancy
!
!
! 
!
!
!
!
crypto isakmp policy 10
 encr 3des
 hash md5
 authentication pre-share
 group 5
crypto isakmp key dmvpnpass address 0.0.0.0        
!
!
crypto ipsec transform-set ESP-AES-256-SHA-512 esp-aes 256 esp-sha512-hmac 
 mode transport
!
crypto ipsec profile DMVPN_PROFILE
 set transform-set ESP-AES-256-SHA-512 
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.13.13.13 255.255.255.255
 ipv6 address 2001:10:13:13:13::13/128
!
interface Tunnel101
 ip address 10.1.101.13 255.255.255.0
 no ip redirects
 ip mtu 1400
 ip pim sparse-mode
 ip nhrp authentication NHRPAUTH
 ip nhrp network-id 1
 ip nhrp nhs 10.1.101.24 nbma 10.24.24.24 multicast
 ip nhrp shortcut
 ip tcp adjust-mss 1360
 ipv6 address FE80::13 link-local
 ipv6 address 2001:10:1:101::13/64
 ipv6 enable
 ipv6 mtu 1400
 ipv6 nhrp authentication NHRPAUTH
 ipv6 nhrp network-id 1
 ipv6 nhrp nhs 2001:10:1:101::24 nbma 10.24.24.24 multicast
 ipv6 nhrp shortcut
 tunnel source GigabitEthernet0/1
 tunnel mode gre multipoint
 tunnel key 101
 tunnel protection ipsec profile DMVPN_PROFILE shared
!
interface Tunnel102
 ip address 10.1.102.13 255.255.255.0
 no ip redirects
 ip mtu 1400
 ip pim sparse-mode
 ip nhrp authentication NHRPAUTH
 ip nhrp network-id 1
 ip nhrp nhs 10.1.102.25 nbma 10.25.25.25 multicast
 ip nhrp shortcut
 ip tcp adjust-mss 1360
 ipv6 address FE80::13 link-local
 ipv6 address 2001:10:1:102::13/64
 ipv6 enable
 ipv6 mtu 1400
 ipv6 nhrp authentication NHRPAUTH
 ipv6 nhrp network-id 1
 ipv6 nhrp nhs 2001:10:1:102::25 nbma 10.25.25.25 multicast
 ipv6 nhrp shortcut
 tunnel source GigabitEthernet0/1
 tunnel mode gre multipoint
 tunnel key 102
 tunnel protection ipsec profile DMVPN_PROFILE shared
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.113 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R12
 ip address 12.18.255.7 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:12:18:255::7/127
!
interface GigabitEthernet0/1.13
 encapsulation dot1Q 13
 ip address 10.1.1.13 255.255.255.0
 ip pim sparse-mode
 ip igmp join-group 225.6.7.8
!
!
router eigrp REMOTE-SITE-1
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  topology base
   redistribute connected metric 100000 100 255 1 1500 route-map CONNECTED
  exit-af-topology
  network 10.1.101.13 0.0.0.0
  network 10.1.102.13 0.0.0.0
  network 10.13.13.13 0.0.0.0
  eigrp router-id 10.13.13.13
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
 exit-address-family
!
router bgp 8593.1
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 12.18.255.6 remote-as 12.82
 neighbor 2001:12:18:255::6 remote-as 12.82
 !
 address-family ipv4
  neighbor 12.18.255.6 activate
 exit-address-family
 !
 address-family ipv6
  neighbor 2001:12:18:255::6 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 10.24.24.24 255.255.255.255 12.18.255.6
ip route 10.25.25.25 255.255.255.255 12.18.255.6
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
route-map CONNECTED permit 10
 match interface GigabitEthernet0/1.13
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R14" type="SIMPLE" subtype="IOSv" location="709,389">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.114</entry>
            <entry key="static_serial_port_0" type="Integer">11014</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:39:41 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R14
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$KM7z$oUfrKEP1VfL41f.lrPh.p1
!
redundancy
!
!
! 
!
!
!
!
crypto isakmp policy 10
 encr 3des
 hash md5
 authentication pre-share
 group 5
crypto isakmp key dmvpnpass address 0.0.0.0        
!
!
crypto ipsec transform-set ESP-AES-256-SHA-512 esp-aes 256 esp-sha512-hmac 
 mode transport
!
crypto ipsec profile DMVPN_PROFILE
 set transform-set ESP-AES-256-SHA-512 
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.14.14.14 255.255.255.255
 ipv6 address 2001:10:14:14:14::14/128
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.114 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R17
 ip address 10.1.2.14 255.255.255.0
 ip pim sparse-mode
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:10:1:2::14/64
!
interface GigabitEthernet0/2
 description to R3
 ip address 184.17.13.26 255.255.255.252
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::26/126
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="R15" type="SIMPLE" subtype="IOSv" location="905,44">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.115</entry>
            <entry key="static_serial_port_0" type="Integer">11015</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:57:25 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R15
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$hMZr$MhP.Cp5vZ.eQbd/8Q7ZOS0
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.15.15.15 255.255.255.255
 ip ospf 15 area 15
 ipv6 address 2001:10:15:15:15::15/128
 ospfv3 15 ipv6 area 15
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.115 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R2
 ip address 184.17.13.2 255.255.255.252
 ip ospf 15 area 15
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::2/126
 ospfv3 15 ipv6 area 15
!
interface GigabitEthernet0/1.15
 encapsulation dot1Q 15
 ip address 172.16.15.15 255.255.255.0
 ip ospf 15 area 15
 ipv6 address 2001:172:16:15::15/64
 ospfv3 15 ipv6 area 15
 no cdp enable
!
router ospfv3 15
 !
 address-family ipv6 unicast
 exit-address-family
!
router ospf 15
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R16" type="SIMPLE" subtype="IOSv" location="1087,31">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.116</entry>
            <entry key="static_serial_port_0" type="Integer">11016</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:57:32 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R16
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$rIk0$Kg8lRP0I2iC/5ZCriTt6a1
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.16.16.16 255.255.255.255
 ip ospf 16 area 16
 ipv6 address 2001:10:16:16:16::16/128
 ospfv3 16 ipv6 area 16
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.116 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R4
 ip address 184.17.13.6 255.255.255.252
 ip ospf 16 area 16
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::6/126
 ospfv3 16 ipv6 area 16
!
interface GigabitEthernet0/1.16
 encapsulation dot1Q 16
 ip address 172.16.16.16 255.255.255.0
 ip ospf 16 area 16
 ipv6 address 2001:172:16:16::16/64
 ospfv3 16 ipv6 area 16
 no cdp enable
!
router ospfv3 16
 !
 address-family ipv6 unicast
 exit-address-family
!
router ospf 16
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R17" type="SIMPLE" subtype="IOSv" location="548,386">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.117</entry>
            <entry key="static_serial_port_0" type="Integer">11017</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:57:39 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R17
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$6uMj$xkE7JawIgA39uW1G5pzdn0
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.17.17.17 255.255.255.255
 ipv6 address 2001:10:17:17:17::17/128
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.117 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to R14
 ip address 10.1.2.17 255.255.255.0
 ip pim sparse-mode
 ip igmp join-group 225.6.7.8
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:10:1:2::17/64
!
!
router eigrp REMOTE-SITE-2
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
  network 10.0.0.0
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R18" type="SIMPLE" subtype="IOSv" location="915,535">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.118</entry>
            <entry key="static_serial_port_0" type="Integer">11018</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:35:58 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R18
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$tZFu$HcAipe1wRL6VCHT2vpxEy0
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.18.18.18 255.255.255.255
 ip ospf 18 area 0
 ipv6 address 2001:10:18:18:18::18/128
 ospfv3 1 ipv6 area 0
!
interface Tunnel1820
 no ip address
 ipv6 enable
 ospfv3 1 ipv6 area 0
 tunnel source Loopback0
 tunnel destination 10.20.20.20
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.118 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW1
 ip address 172.16.18.18 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:172:16:18::18/64
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/2
 description to R3
 ip address 184.17.13.10 255.255.255.252
 ip ospf 18 area 0
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::A/126
 ospfv3 1 ipv6 area 0
!
router ospfv3 1
 !
 address-family ipv6 unicast
 exit-address-family
!
router ospf 18
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="R19" type="SIMPLE" subtype="IOSv" location="1108,534">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.119</entry>
            <entry key="static_serial_port_0" type="Integer">11019</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:38:13 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R19
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$eQc4$1QZZEj9fklVh/DrlZyEgP0
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.19.19.19 255.255.255.255
 ip ospf 19 area 0
 ipv6 address 2001:10:19:19:19::19/128
 ospfv3 1 ipv6 area 0
!
interface Tunnel1920
 no ip address
 ipv6 enable
 ospfv3 1 ipv6 area 0
 tunnel source Loopback0
 tunnel destination 10.20.20.20
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.119 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW1
 ip address 172.16.19.19 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:172:16:19::19/64
 ospfv3 1 ipv6 area 0
!
interface GigabitEthernet0/2
 description to R5
 ip address 184.17.13.14 255.255.255.252
 ip ospf 19 area 0
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::E/126
 ospfv3 1 ipv6 area 0
!
router ospfv3 1
 !
 address-family ipv6 unicast
 exit-address-family
!
router ospf 19
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="R20" type="SIMPLE" subtype="IOSv" location="1016,722">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.120</entry>
            <entry key="static_serial_port_0" type="Integer">11020</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:42:11 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R20
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$VQdX$hxmiSR.6T/uoT.Ag9WSw00
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.20.20.20 255.255.255.255
 ipv6 address 2001:10:20:20:20::20/128
 ospfv3 1 ipv6 area 0
!
interface Tunnel1820
 no ip address
 ipv6 enable
 ospfv3 1 ipv6 area 0
 tunnel source Loopback0
 tunnel destination 10.18.18.18
!
interface Tunnel1920
 no ip address
 ipv6 enable
 ospfv3 1 ipv6 area 0
 tunnel source Loopback0
 tunnel destination 10.19.19.19
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.120 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW1
 ip address 172.16.20.20 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:172:16:20::20/64
 ospfv3 1 ipv6 area 0
!
router ospfv3 1
 !
 address-family ipv6 unicast
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R21" type="SIMPLE" subtype="IOSv" location="1372,523">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.121</entry>
            <entry key="static_serial_port_0" type="Integer">11021</entry>
            <entry key="config" type="String">!
! Last configuration change at 13:13:59 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R21
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$PwME$tSJAY2ceWEg0OCtAzYp6T.
!
redundancy
!
!
! 
!
!
!
!
crypto isakmp policy 10
 encr 3des
 hash md5
 authentication pre-share
 group 5
crypto isakmp key dmvpnpass address 0.0.0.0        
!
!
crypto ipsec transform-set ESP-AES-256-SHA-512 esp-aes 256 esp-sha512-hmac 
 mode transport
!
crypto ipsec profile DMVPN_PROFILE
 set transform-set ESP-AES-256-SHA-512 
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.21.21.21 255.255.255.255
 ipv6 address 2001:10:21:21:21::21/128
!
interface Tunnel101
 ip address 10.1.101.21 255.255.255.0
 no ip redirects
 ip mtu 1400
 ip pim sparse-mode
 ip nhrp authentication NHRPAUTH
 ip nhrp network-id 1
 ip nhrp nhs 10.1.101.24 nbma 10.24.24.24 multicast
 ip nhrp shortcut
 ip tcp adjust-mss 1360
 ipv6 address FE80::21 link-local
 ipv6 address 2001:10:1:101::21/64
 ipv6 mtu 1400
 ipv6 nhrp authentication NHRPAUTH
 ipv6 nhrp network-id 1
 ipv6 nhrp nhs 2001:10:1:101::24 nbma 10.24.24.24 multicast
 ipv6 nhrp shortcut
 tunnel source GigabitEthernet0/2
 tunnel mode gre multipoint
 tunnel key 101
 tunnel protection ipsec profile DMVPN_PROFILE shared
!
interface Tunnel102
 ip address 10.1.102.21 255.255.255.0
 no ip redirects
 ip mtu 1400
 ip pim sparse-mode
 ip nhrp authentication NHRPAUTH
 ip nhrp network-id 1
 ip nhrp nhs 10.1.102.25 nbma 10.25.25.25 multicast
 ip nhrp shortcut
 ip tcp adjust-mss 1360
 ipv6 address FE80::21 link-local
 ipv6 address 2001:10:1:102::21/64
 ipv6 enable
 ipv6 mtu 1400
 ipv6 nhrp authentication NHRPAUTH
 ipv6 nhrp network-id 1
 ipv6 nhrp nhs 2001:10:1:102::25 nbma 10.25.25.25 multicast
 ipv6 nhrp shortcut
 tunnel source GigabitEthernet0/2
 tunnel mode gre multipoint
 tunnel key 102
 tunnel protection ipsec profile DMVPN_PROFILE shared
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.121 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW2
 ip address 10.1.3.21 255.255.255.0
 ip access-group NULL in
 ip pim sparse-mode
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:10:1:3::21/64
!
interface GigabitEthernet0/2
 description to R11
 ip address 167.22.2.3 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:167:22:2::3/127
!
!
router eigrp REMOTE-SITE-3
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
  network 10.0.0.0
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
 exit-address-family
!
router bgp 563150851
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 2001:167:22:2::2 remote-as 2202
 neighbor 167.22.2.2 remote-as 2202
 !
 address-family ipv4
  neighbor 167.22.2.2 activate
 exit-address-family
 !
 address-family ipv6
  neighbor 2001:167:22:2::2 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 10.24.24.24 255.255.255.255 167.22.2.2
ip route 10.25.25.25 255.255.255.255 167.22.2.2
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
ip access-list extended NULL
 deny   igmp host 10.1.3.23 any
 permit ip any any
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="R22" type="SIMPLE" subtype="IOSv" location="1280,714">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.122</entry>
            <entry key="static_serial_port_0" type="Integer">11022</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:58:14 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R22
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$Pz81$D3dFvVPIYOfsmJ1O9hC8l.
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.22.22.22 255.255.255.255
 ipv6 address 2001:10:22:22:22::22/128
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.122 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW2
 ip address 10.1.3.22 255.255.255.0
 ip pim sparse-mode
 ip igmp join-group 225.6.7.8
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:10:1:3::22/64
!
!
router eigrp REMOTE-SITE-3
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
  network 10.0.0.0
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R23" type="SIMPLE" subtype="IOSv" location="1478,710">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.123</entry>
            <entry key="static_serial_port_0" type="Integer">11023</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:58:19 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R23
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$htn9$mWXIlb3D3fDxesWECPPrw.
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.23.23.23 255.255.255.255
 ipv6 address 2001:10:23:23:23::23/128
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.123 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW2
 ip address 10.1.3.23 255.255.255.0
 ip pim sparse-mode
 ip igmp join-group 225.6.7.8
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:10:1:3::23/64
!
!
router eigrp REMOTE-SITE-3
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
  network 10.0.0.0
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R24" type="SIMPLE" subtype="IOSv" location="1516,227">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.124</entry>
            <entry key="static_serial_port_0" type="Integer">11024</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:02:30 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R24
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$b1MQ$c1l8JE8fqcYAeVjOmfJlu/
!
redundancy
!
!
! 
!
!
!
!
crypto isakmp policy 10
 encr 3des
 hash md5
 authentication pre-share
 group 5
crypto isakmp key dmvpnpass address 0.0.0.0        
!
!
crypto ipsec transform-set ESP-AES-256-SHA-512 esp-aes 256 esp-sha512-hmac 
 mode transport
!
crypto ipsec profile DMVPN_PROFILE
 set transform-set ESP-AES-256-SHA-512 
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.24.24.24 255.255.255.255
 ip pim sparse-mode
 ipv6 address 2001:10:24:24:24::24/128
!
interface Loopback1
 ip address 10.1.255.255 255.255.255.255
 ip pim sparse-mode
!
interface Tunnel101
 ip address 10.1.101.24 255.255.255.0
 no ip redirects
 ip mtu 1400
 ip pim sparse-mode
 ip nhrp authentication NHRPAUTH
 ip nhrp map multicast dynamic
 ip nhrp network-id 1
 ip nhrp redirect
 ip tcp adjust-mss 1360
 ipv6 address FE80::24 link-local
 ipv6 address 2001:10:1:101::24/64
 ipv6 enable
 ipv6 mtu 1400
 ipv6 nhrp authentication NHRPAUTH
 ipv6 nhrp map multicast dynamic
 ipv6 nhrp network-id 1
 ipv6 nhrp shortcut
 ipv6 nhrp redirect
 tunnel source Loopback0
 tunnel mode gre multipoint
 tunnel key 101
 tunnel protection ipsec profile DMVPN_PROFILE
!
interface Tunnel102
 no ip address
 ip pim sparse-mode
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.124 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW3
 no ip address
 duplex full
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1.100
 encapsulation dot1Q 100
 ip address 10.1.100.24 255.255.255.0
 ip pim dr-priority 1000
 ip pim sparse-mode
 ipv6 address 2001:10:1:100::24/64
 vrrp 100 ip 10.1.100.254
 vrrp 100 priority 20
 no cdp enable
!
interface GigabitEthernet0/1.200
 encapsulation dot1Q 200
 ip address 10.1.200.24 255.255.255.0
 ip pim dr-priority 500
 ip pim sparse-mode
 ipv6 address 2001:10:1:200::24/64
 vrrp 200 ip 10.1.200.254
 vrrp 200 priority 10
 no cdp enable
!
interface GigabitEthernet0/2
 description to R9
 ip address 29.11.1.7 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:29:11:1::7/127
!
interface GigabitEthernet0/3
 description to R4
 ip address 184.17.13.18 255.255.255.252
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:13::18/64
!
!
router eigrp PRIMARY-DC
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  af-interface Tunnel101
   summary-address 10.0.0.0 255.0.0.0
  exit-af-interface
  !
  topology base
  exit-af-topology
  network 10.0.0.0
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  af-interface Tunnel101
   summary-address 2001:10::/32
  exit-af-interface
  !
  topology base
  exit-af-topology
 exit-address-family
!
router bgp 8593.1
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 10.25.25.25 remote-as 8593.1
 neighbor 10.25.25.25 update-source Loopback0
 neighbor 29.11.1.6 remote-as 1101
 neighbor 2001:10:25:25:25::25 remote-as 8593.1
 neighbor 2001:10:25:25:25::25 update-source Loopback0
 neighbor 2001:29:11:1::6 remote-as 1101
 neighbor 2001:184:17:13::17 remote-as 18417
 neighbor 184.17.13.17 remote-as 18417
 !
 address-family ipv4
  network 10.24.24.24 mask 255.255.255.255
  neighbor 10.25.25.25 activate
  neighbor 10.25.25.25 next-hop-self
  neighbor 29.11.1.6 activate
  neighbor 29.11.1.6 route-map PREFER_ISP_A in
  neighbor 184.17.13.17 activate
 exit-address-family
 !
 address-family ipv6
  neighbor 2001:10:25:25:25::25 activate
  neighbor 2001:10:25:25:25::25 next-hop-self
  neighbor 2001:29:11:1::6 activate
  neighbor 2001:184:17:13::17 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip pim bsr-candidate GigabitEthernet0/1.100 0
ip pim rp-candidate Loopback1
ip msdp peer 10.25.25.25 connect-source Loopback0
ip msdp cache-sa-state
ip msdp default-peer 10.25.25.25
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
route-map PREFER_ISP_A permit 10
 set local-preference 1101
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="R25" type="SIMPLE" subtype="IOSv" location="1507,399">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.125</entry>
            <entry key="static_serial_port_0" type="Integer">11025</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:26:40 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R25
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$fyWJ$sKZro.xdA4F5/vFBYluCt.
!
redundancy
!
!
! 
!
!
!
!
crypto isakmp policy 10
 encr 3des
 hash md5
 authentication pre-share
 group 5
crypto isakmp key dmvpnpass address 0.0.0.0        
!
!
crypto ipsec transform-set ESP-AES-256-SHA-512 esp-aes 256 esp-sha512-hmac 
 mode transport
!
crypto ipsec profile DMVPN_PROFILE
 set transform-set ESP-AES-256-SHA-512 
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.25.25.25 255.255.255.255
 ip pim sparse-mode
 ipv6 address 2001:10:25:25:25::25/128
!
interface Loopback1
 ip address 10.1.255.255 255.255.255.255
 ip pim sparse-mode
!
interface Tunnel101
 no ip address
 ip pim sparse-mode
!
interface Tunnel102
 ip address 10.1.102.25 255.255.255.0
 no ip redirects
 ip mtu 1400
 ip pim sparse-mode
 ip nhrp authentication NHRPAUTH
 ip nhrp map multicast dynamic
 ip nhrp network-id 1
 ip nhrp redirect
 ip tcp adjust-mss 1360
 ipv6 address FE80::25 link-local
 ipv6 address 2001:10:1:102::25/64
 ipv6 enable
 ipv6 mtu 1400
 ipv6 nhrp authentication NHRPAUTH
 ipv6 nhrp map multicast dynamic
 ipv6 nhrp network-id 1
 ipv6 nhrp shortcut
 ipv6 nhrp redirect
 tunnel source Loopback0
 tunnel mode gre multipoint
 tunnel key 102
 tunnel protection ipsec profile DMVPN_PROFILE
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.125 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW3
 no ip address
 duplex full
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1.100
 encapsulation dot1Q 100
 ip address 10.1.100.25 255.255.255.0
 ip pim dr-priority 500
 ip pim sparse-mode
 ipv6 address 2001:10:1:100::25/64
 vrrp 100 ip 10.1.100.254
 vrrp 100 priority 10
 no cdp enable
!
interface GigabitEthernet0/2
 description to R11
 ip address 167.22.2.5 255.255.255.254
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:167:22:2::5/127
!
interface GigabitEthernet0/3
 description to R5
 ip address 184.17.13.22 255.255.255.252
 duplex full
 speed auto
 media-type rj45
 ipv6 address 2001:184:17:113::22/64
!
!
router eigrp PRIMARY-DC
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  af-interface Tunnel102
   summary-address 10.0.0.0 255.0.0.0
  exit-af-interface
  !
  topology base
  exit-af-topology
  network 10.0.0.0
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  af-interface Tunnel102
   summary-address 2001:10::/32
  exit-af-interface
  !
  topology base
  exit-af-topology
 exit-address-family
!
router bgp 8593.1
 bgp asnotation dot
 bgp log-neighbor-changes
 no bgp default ipv4-unicast
 neighbor 10.24.24.24 remote-as 8593.1
 neighbor 10.24.24.24 update-source Loopback0
 neighbor 2001:10:24:24:24::24 remote-as 8593.1
 neighbor 2001:10:24:24:24::24 update-source Loopback0
 neighbor 2001:167:22:2::4 remote-as 2202
 neighbor 2001:184:17:113::21 remote-as 18417
 neighbor 167.22.2.4 remote-as 2202
 neighbor 184.17.13.21 remote-as 18417
 !
 address-family ipv4
  network 10.25.25.25 mask 255.255.255.255
  neighbor 10.24.24.24 activate
  neighbor 10.24.24.24 next-hop-self
  neighbor 167.22.2.4 activate
  neighbor 167.22.2.4 route-map PRIMARY_ISP in
  neighbor 184.17.13.21 activate
 exit-address-family
 !
 address-family ipv6
  neighbor 2001:10:24:24:24::24 activate
  neighbor 2001:10:24:24:24::24 next-hop-self
  neighbor 2001:167:22:2::4 activate
  neighbor 2001:184:17:113::21 activate
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip pim bsr-candidate GigabitEthernet0/1.100 0
ip pim rp-candidate Loopback1
ip msdp peer 10.24.24.24 connect-source Loopback0
ip msdp cache-sa-state
ip msdp default-peer 10.24.24.24
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
route-map PRIMARY_ISP permit 10
 set local-preference 200
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="R26" type="SIMPLE" subtype="IOSv" location="1691,239">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.126</entry>
            <entry key="static_serial_port_0" type="Integer">11026</entry>
            <entry key="config" type="String">!
! Last configuration change at 13:01:54 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R26
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$lfQP$bfsTIOUlcVYwYJEfaHlz71
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.26.26.26 255.255.255.255
 ip pim sparse-mode
 ipv6 address 2001:10:26:26:26::26/128
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.126 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW3
 no ip address
 duplex full
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1.100
 encapsulation dot1Q 100
 ip address 10.1.100.26 255.255.255.0
 ip pim sparse-mode
 ipv6 address 2001:10:1:100::26/64
 no cdp enable
!
interface GigabitEthernet0/1.200
 encapsulation dot1Q 200
 ip address 10.1.200.26 255.255.255.0
 ip pim sparse-mode
 ipv6 address 2001:10:1:200::26/64
 no cdp enable
!
!
router eigrp PRIMARY-DC
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
  network 10.0.0.0
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
    </node>
    <node name="R27" type="SIMPLE" subtype="IOSv" location="1701,403">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.127</entry>
            <entry key="static_serial_port_0" type="Integer">11027</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:21:32 UTC Mon Nov 14 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R27
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip domain name virl.info
ip multicast-routing 
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
username cisco privilege 15 secret 5 $1$SAQN$MiZh1/li0yyXMFcUL1YHu/
!
redundancy
!
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 ip address 10.27.27.27 255.255.255.255
 ipv6 address 2001:10:27:27:27::27/128
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 198.18.1.127 255.255.255.0
 duplex full
 speed auto
 media-type rj45
 no cdp enable
!
interface GigabitEthernet0/1
 description to SW3
 no ip address
 duplex full
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1.100
 encapsulation dot1Q 100
 ip address 10.1.100.27 255.255.255.0
 ip pim sparse-mode
 ipv6 address 2001:10:1:100::27/64
 no cdp enable
!
interface GigabitEthernet0/1.200
 encapsulation dot1Q 200
 ip address 10.1.200.27 255.255.255.0
 ip pim sparse-mode
 ipv6 address 2001:10:1:200::27/64
 no cdp enable
!
interface GigabitEthernet0/2
 no ip address
 duplex auto
 speed auto
 media-type rj45
!
!
router eigrp PRIMARY-DC
 !
 address-family ipv4 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
  network 10.0.0.0
  metric weights 0 1 1 0 0 0 0
 exit-address-family
 !
 address-family ipv6 unicast autonomous-system 8593
  !
  topology base
  exit-af-topology
 exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
ip ssh server algorithm authentication password
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
no scheduler allocate
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="SW1" type="SIMPLE" subtype="IOSvL2" location="1018,620">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.128</entry>
            <entry key="static_serial_port_0" type="Integer">11028</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:42:00 UTC Mon Nov 14 2016
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW1
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
vtp domain virl.lab
vtp mode transparent
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 2
 name ank_vlan2
!
vlan 18-20 
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 10.28.28.28 255.255.255.255
!
interface GigabitEthernet0/1
 description to R18
 switchport access vlan 18
 switchport mode access
 media-type rj45
 duplex full
 no negotiation auto
!
interface GigabitEthernet0/2
 description to R19
 switchport access vlan 19
 switchport mode access
 media-type rj45
 duplex full
 no negotiation auto
!
interface GigabitEthernet0/3
 description to R20
 switchport access vlan 20
 switchport mode access
 media-type rj45
 duplex full
 no negotiation auto
!
interface GigabitEthernet0/0
 description OOB management
 no switchport
 vrf forwarding Mgmt-intf
 ip address 198.18.1.128 255.255.255.0
 negotiation auto
 no cdp enable
!
interface Vlan18
 ip address 172.16.18.254 255.255.255.0
!
interface Vlan19
 ip address 172.16.19.254 255.255.255.0
!
interface Vlan20
 ip address 172.16.20.254 255.255.255.0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
!
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="SW2" type="SIMPLE" subtype="IOSvL2" location="1369,631">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.129</entry>
            <entry key="static_serial_port_0" type="Integer">11029</entry>
            <entry key="config" type="String">!
! Last configuration change at 12:59:32 UTC Mon Nov 14 2016
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW2
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
vtp domain virl.lab
vtp mode transparent
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 2
 name ank_vlan2
!
vlan 1013 
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 no ip address
!
interface GigabitEthernet0/1
 description to R21
 switchport access vlan 1013
 switchport mode access
 media-type rj45
 duplex full
 no negotiation auto
!
interface GigabitEthernet0/2
 description to R22
 switchport access vlan 1013
 switchport mode access
 media-type rj45
 duplex full
 no negotiation auto
!
interface GigabitEthernet0/3
 description to R23
 switchport access vlan 1013
 switchport mode access
 media-type rj45
 duplex full
 no negotiation auto
!
interface GigabitEthernet0/0
 description OOB management
 no switchport
 vrf forwarding Mgmt-intf
 ip address 198.18.1.129 255.255.255.0
 negotiation auto
 no cdp enable
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
!
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="SW3" type="SIMPLE" subtype="IOSvL2" location="1610,313">
        <extensions>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
            <entry key="static_ip" type="String">198.18.1.130</entry>
            <entry key="static_serial_port_0" type="Integer">11030</entry>
            <entry key="config" type="String">!
! Last configuration change at 18:30:29 UTC Mon Nov 14 2016
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW3
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
vtp domain virl.lab
vtp mode transparent
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 2
 name ank_vlan2
!
vlan 100-101,200,202 
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 no ip address
!
interface GigabitEthernet0/1
 description to R24
 switchport access vlan 2
 switchport trunk allowed vlan 100,200
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 spanning-tree portfast edge trunk
 spanning-tree link-type point-to-point
!
interface GigabitEthernet0/2
 description to R25
 switchport access vlan 2
 switchport trunk allowed vlan 100,200
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 spanning-tree portfast edge trunk
 spanning-tree link-type point-to-point
!
interface GigabitEthernet0/3
 description to R26
 switchport access vlan 2
 switchport trunk allowed vlan 10,200
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 100
 switchport mode trunk
 media-type rj45
 negotiation auto
 spanning-tree portfast edge trunk
 spanning-tree link-type point-to-point
!
interface GigabitEthernet0/0
 description OOB management
 no switchport
 vrf forwarding Mgmt-intf
 ip address 198.18.1.130 255.255.255.0
 negotiation auto
 no cdp enable
!
interface GigabitEthernet1/0
 description to R27
 switchport access vlan 2
 switchport trunk allowed vlan 100,200
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 duplex full
 no negotiation auto
 spanning-tree portfast edge trunk
 spanning-tree link-type point-to-point
!
interface GigabitEthernet1/1
 description to R27
 switchport access vlan 2
 switchport trunk allowed vlan 100,200
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 duplex full
 no negotiation auto
 spanning-tree portfast edge trunk
 spanning-tree link-type point-to-point
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route vrf Mgmt-intf 0.0.0.0 0.0.0.0 198.18.1.1
!
!
kron occurrence KRONJOB in 1 recurring system-startup
 policy-list KRONPOLICY
!
kron policy-list KRONPOLICY
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
 cli event manager run CLI_AFTER_BOOT
!
!
!
!
control-plane
!
!
line con 0
 password cisco
line aux 0
line vty 0 4
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
line vty 5 100
 privilege level 15
 logging synchronous
 no login
 length 0
 transport input telnet
!
event manager applet CLI_AFTER_BOOT
 event none
 action 1.0 cli command "enable"
 action 2.0 cli command "configure terminal"
 action 3.0 cli command "no banner motd"
 action 4.0 cli command "no banner login"
 action 5.0 cli command "no banner incoming"
 action 6.0 cli command "no banner exec"
!
end</entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
        <interface id="3" name="GigabitEthernet1/0"/>
        <interface id="4" name="GigabitEthernet1/1"/>
    </node>
    <annotations/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[4]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[5]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[4]"/>
    <connection dst="/virl:topology/virl:node[6]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[5]"/>
    <connection dst="/virl:topology/virl:node[8]/virl:interface[1]" src="/virl:topology/virl:node[7]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[9]/virl:interface[1]" src="/virl:topology/virl:node[8]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[10]/virl:interface[1]" src="/virl:topology/virl:node[8]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[30]/virl:interface[1]" src="/virl:topology/virl:node[24]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[30]/virl:interface[2]" src="/virl:topology/virl:node[25]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[30]/virl:interface[3]" src="/virl:topology/virl:node[26]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[30]/virl:interface[4]" src="/virl:topology/virl:node[27]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[29]/virl:interface[1]" src="/virl:topology/virl:node[21]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[29]/virl:interface[2]" src="/virl:topology/virl:node[22]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[29]/virl:interface[3]" src="/virl:topology/virl:node[23]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[11]/virl:interface[1]" src="/virl:topology/virl:node[21]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[11]/virl:interface[2]" src="/virl:topology/virl:node[10]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[25]/virl:interface[2]" src="/virl:topology/virl:node[11]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[5]/virl:interface[2]" src="/virl:topology/virl:node[25]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[28]/virl:interface[1]" src="/virl:topology/virl:node[18]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[28]/virl:interface[2]" src="/virl:topology/virl:node[19]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[28]/virl:interface[3]" src="/virl:topology/virl:node[20]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[14]/virl:interface[1]" src="/virl:topology/virl:node[17]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[3]/virl:interface[2]" src="/virl:topology/virl:node[14]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[3]/virl:interface[3]" src="/virl:topology/virl:node[12]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[2]" src="/virl:topology/virl:node[12]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[7]/virl:interface[2]" src="/virl:topology/virl:node[12]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[4]/virl:interface[2]" src="/virl:topology/virl:node[16]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[3]" src="/virl:topology/virl:node[15]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[12]/virl:interface[4]" src="/virl:topology/virl:node[13]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[12]/virl:interface[5]" src="/virl:topology/virl:node[11]/virl:interface[4]"/>
    <connection dst="/virl:topology/virl:node[24]/virl:interface[2]" src="/virl:topology/virl:node[9]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[4]/virl:interface[3]" src="/virl:topology/virl:node[24]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[18]/virl:interface[2]" src="/virl:topology/virl:node[3]/virl:interface[4]"/>
    <connection dst="/virl:topology/virl:node[19]/virl:interface[2]" src="/virl:topology/virl:node[5]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[27]/virl:interface[2]" src="/virl:topology/virl:node[30]/virl:interface[5]"/>
</topology>