Crypto.cpp

/*
    BearSSL Copyright (c) 2016 Thomas Pornin <pornin@bolet.org>
    Rest of this file Copyright (C) 2019 Anders Löfgren

    License (MIT license):

    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is
    furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
    THE SOFTWARE.
*/

#include "Crypto.h"
#include <TypeConversion.h>
#include <bearssl/bearssl.h>
#include <assert.h>

namespace TypeCast = experimental::TypeConversion;

namespace
{
size_t _ctMinDataLength = 0;
size_t _ctMaxDataLength = 1024;

uint8_t *defaultNonceGenerator(uint8_t *nonceArray, const size_t nonceLength)
{
    /**
        The ESP32 Technical Reference Manual v4.1 chapter 24 has the following to say about random number generation (no information found for ESP8266):

        "When used correctly, every 32-bit value the system reads from the RNG_DATA_REG register of the random number generator is a true random number.
        These true random numbers are generated based on the noise in the Wi-Fi/BT RF system.
        When Wi-Fi and BT are disabled, the random number generator will give out pseudo-random numbers.

        When Wi-Fi or BT is enabled, the random number generator is fed two bits of entropy every APB clock cycle (normally 80 MHz).
        Thus, for the maximum amount of entropy, it is advisable to read the random register at a maximum rate of 5 MHz.
        A data sample of 2 GB, read from the random number generator with Wi-Fi enabled and the random register read at 5 MHz,
        has been tested using the Dieharder Random Number Testsuite (version 3.31.1).
        The sample passed all tests."

        Since ESP32 is the sequal to ESP8266 it is unlikely that the ESP8266 is able to generate random numbers more quickly than 5 MHz when run at a 80 MHz frequency.
        A maximum random number frequency of 0.5 MHz is used here to leave some margin for possibly inferior components in the ESP8266.
        It should be noted that the ESP8266 has no Bluetooth functionality, so turning the WiFi off is likely to cause RANDOM_REG32 to use pseudo-random numbers.

        It is possible that yield() must be called on the ESP8266 to properly feed the hardware random number generator new bits, since there is only one processor core available.
        However, no feeding requirements are mentioned in the ESP32 documentation, and using yield() could possibly cause extended delays during nonce generation.
        Thus only delayMicroseconds() is used below.
    */

    return ESP.random(nonceArray, nonceLength);
}

experimental::crypto::nonceGeneratorType _nonceGenerator = defaultNonceGenerator;

void *createBearsslHmac(const br_hash_class *hashType, const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    // Comments mainly from https://www.bearssl.org/apidoc/bearssl__hmac_8h.html

    // HMAC is initialized with a key and an underlying hash function; it then fills a "key context". That context contains the processed key.
    // With the key context, a HMAC context can be initialized to process the input bytes and obtain the MAC output. The key context is not modified during that process, and can be reused.

    br_hmac_key_context keyContext; // Holds general HMAC info
    br_hmac_context hmacContext; // Holds general HMAC info + specific info for the current operation

    // HMAC key context initialisation.
    // Initialise the key context with the provided hash key, using the hash function identified by hashType. This supports arbitrary key lengths.
    br_hmac_key_init(&keyContext, hashType, hashKey, hashKeyLength);

    // Initialise a HMAC context with a key context. The key context is unmodified.
    // Relevant data from the key context is immediately copied; the key context can thus be independently reused, modified or released without impacting this HMAC computation.
    // An explicit output length can be specified; the actual output length will be the minimum of that value and the natural HMAC output length.
    // If outputLength is 0, then the natural HMAC output length is selected. The "natural output length" is the output length of the underlying hash function.
    br_hmac_init(&hmacContext, &keyContext, outputLength);

    // Provide the HMAC context with the data to create a HMAC from.
    // The provided dataLength bytes are injected as extra input in the HMAC computation incarnated by the hmacContext.
    // It is acceptable that dataLength is zero, in which case data is ignored (and may be NULL) and this function does nothing.
    br_hmac_update(&hmacContext, data, dataLength);

    // Compute the HMAC output.
    // The destination buffer MUST be large enough to accommodate the result; its length is at most the "natural length" of HMAC (i.e. the output length of the underlying hash function).
    // The context is NOT modified; further bytes may be processed. Thus, "partial HMAC" values can be efficiently obtained.
    // Optionally the constant-time version br_hmac_outCT() can be used. More info here: https://www.bearssl.org/constanttime.html .
    br_hmac_out(&hmacContext, resultArray); // returns size_t outputLength

    return resultArray;
}

String createBearsslHmac(const br_hash_class *hashType, const uint8_t hashTypeNaturalLength, const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    (void) hashTypeNaturalLength;
    assert(1 <= hmacLength && hmacLength <= hashTypeNaturalLength);

    uint8_t hmac[hmacLength];
    createBearsslHmac(hashType, message.c_str(), message.length(), hashKey, hashKeyLength, hmac, hmacLength);
    return TypeCast::uint8ArrayToHexString(hmac, hmacLength);
}

void *createBearsslHmacCT(const br_hash_class *hashType, const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    assert(_ctMinDataLength <= dataLength && dataLength <= _ctMaxDataLength);

    // Comments mainly from https://www.bearssl.org/apidoc/bearssl__hmac_8h.html

    // HMAC is initialized with a key and an underlying hash function; it then fills a "key context". That context contains the processed key.
    // With the key context, a HMAC context can be initialized to process the input bytes and obtain the MAC output. The key context is not modified during that process, and can be reused.

    br_hmac_key_context keyContext; // Holds general HMAC info
    br_hmac_context hmacContext; // Holds general HMAC info + specific info for the current operation

    // HMAC key context initialisation.
    // Initialise the key context with the provided hash key, using the hash function identified by hashType. This supports arbitrary key lengths.
    br_hmac_key_init(&keyContext, hashType, hashKey, hashKeyLength);

    // Initialise a HMAC context with a key context. The key context is unmodified.
    // Relevant data from the key context is immediately copied; the key context can thus be independently reused, modified or released without impacting this HMAC computation.
    // An explicit output length can be specified; the actual output length will be the minimum of that value and the natural HMAC output length.
    // If outputLength is 0, then the natural HMAC output length is selected. The "natural output length" is the output length of the underlying hash function.
    br_hmac_init(&hmacContext, &keyContext, outputLength);

    // Provide the HMAC context with the data to create a HMAC from.
    // The provided dataLength bytes are injected as extra input in the HMAC computation incarnated by the hmacContext.
    // It is acceptable that dataLength is zero, in which case data is ignored (and may be NULL) and this function does nothing.
    // No need for br_hmac_update when using constant-time version it seems. If it is used, the data provided to br_hmac_outCT will just be appended.
    // br_hmac_update(&hmacContext, data, dataLength);

    // Compute the HMAC output. Assumes message is minimum _ctMinDataLength bytes and maximum _ctMaxDataLength bytes.
    // As long as this is true, the correct HMAC output is calculated in constant-time. More constant-time info here: https://www.bearssl.org/constanttime.html
    // Some extra input bytes are processed, then the output is computed.
    // The extra input consists in the dataLength bytes pointed to by data. The dataLength parameter must lie between _ctMinDataLength and _ctMaxDataLength (inclusive);
    // _ctMaxDataLength bytes are actually read from data (indicating each data byte can be read multiple times, if dataLength < _ctMaxDataLength).
    // Computing time (and memory access pattern) will not depend upon the data byte contents or the value of dataLength.
    // The output is written in the resultArray buffer, that MUST be large enough to receive it.
    // The difference _ctMaxDataLength - _ctMinDataLength MUST be less than 2^30 (i.e. about one gigabyte).
    // This function computes the output properly only if the underlying hash function uses MD padding (i.e. MD5, SHA-1, SHA-224, SHA-256, SHA-384 or SHA-512).
    // The provided context is NOT modified.
    br_hmac_outCT(&hmacContext, data, dataLength, _ctMinDataLength, _ctMaxDataLength, resultArray); // returns size_t outputLength

    return resultArray;
}

String createBearsslHmacCT(const br_hash_class *hashType, const uint8_t hashTypeNaturalLength, const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    (void) hashTypeNaturalLength;
    assert(1 <= hmacLength && hmacLength <= hashTypeNaturalLength);

    uint8_t hmac[hmacLength];
    createBearsslHmacCT(hashType, message.c_str(), message.length(), hashKey, hashKeyLength, hmac, hmacLength);
    return TypeCast::uint8ArrayToHexString(hmac, hmacLength);
}


// Helper function to avoid deprecated warnings.
void *md5HashHelper(const void *data, const size_t dataLength, void *resultArray)
{
    br_md5_context context;
    br_md5_init(&context);
    br_md5_update(&context, data, dataLength);
    br_md5_out(&context, resultArray);
    return resultArray;
}

// Helper function to avoid deprecated warnings.
void *sha1HashHelper(const void *data, const size_t dataLength, void *resultArray)
{
    br_sha1_context context;
    br_sha1_init(&context);
    br_sha1_update(&context, data, dataLength);
    br_sha1_out(&context, resultArray);
    return resultArray;
}
}

namespace experimental
{
namespace crypto
{
void setCtMinDataLength(const size_t ctMinDataLength)
{
    assert(getCtMaxDataLength() - ctMinDataLength <= CT_MAX_DIFF);
    _ctMinDataLength = ctMinDataLength;
}
size_t getCtMinDataLength()
{
    return _ctMinDataLength;
}

void setCtMaxDataLength(const size_t ctMaxDataLength)
{
    assert(ctMaxDataLength - getCtMinDataLength() <= CT_MAX_DIFF);
    _ctMaxDataLength = ctMaxDataLength;
}
size_t getCtMaxDataLength()
{
    return _ctMaxDataLength;
}

void setNonceGenerator(nonceGeneratorType nonceGenerator)
{
    _nonceGenerator = nonceGenerator;
}
nonceGeneratorType getNonceGenerator()
{
    return _nonceGenerator;
}


// #################### MD5 ####################

// resultArray must have size MD5::NATURAL_LENGTH or greater
void *MD5::hash(const void *data, const size_t dataLength, void *resultArray)
{
    return md5HashHelper(data, dataLength, resultArray);
}

String MD5::hash(const String &message)
{
    uint8_t hashArray[NATURAL_LENGTH];
    md5HashHelper(message.c_str(), message.length(), hashArray);
    return TypeCast::uint8ArrayToHexString(hashArray, NATURAL_LENGTH);
}

void *MD5::hmac(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmac(&br_md5_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String MD5::hmac(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmac(&br_md5_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}

void *MD5::hmacCT(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmacCT(&br_md5_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String MD5::hmacCT(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmacCT(&br_md5_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}


// #################### SHA-1 ####################

// resultArray must have size SHA1::NATURAL_LENGTH or greater
void *SHA1::hash(const void *data, const size_t dataLength, void *resultArray)
{
    return sha1HashHelper(data, dataLength, resultArray);
}

String SHA1::hash(const String &message)
{
    uint8_t hashArray[NATURAL_LENGTH];
    sha1HashHelper(message.c_str(), message.length(), hashArray);
    return TypeCast::uint8ArrayToHexString(hashArray, NATURAL_LENGTH);
}

void *SHA1::hmac(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmac(&br_sha1_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA1::hmac(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmac(&br_sha1_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}

void *SHA1::hmacCT(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmacCT(&br_sha1_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA1::hmacCT(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmacCT(&br_sha1_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}


// #################### SHA-224 ####################

// resultArray must have size SHA224::NATURAL_LENGTH or greater
void *SHA224::hash(const void *data, const size_t dataLength, void *resultArray)
{
    br_sha224_context context;
    br_sha224_init(&context);
    br_sha224_update(&context, data, dataLength);
    br_sha224_out(&context, resultArray);
    return resultArray;
}

String SHA224::hash(const String &message)
{
    uint8_t hashArray[NATURAL_LENGTH];
    hash(message.c_str(), message.length(), hashArray);
    return TypeCast::uint8ArrayToHexString(hashArray, NATURAL_LENGTH);
}

void *SHA224::hmac(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmac(&br_sha224_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA224::hmac(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmac(&br_sha224_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}

void *SHA224::hmacCT(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmacCT(&br_sha224_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA224::hmacCT(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmacCT(&br_sha224_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}


// #################### SHA-256 ####################

// resultArray must have size SHA256::NATURAL_LENGTH or greater
void *SHA256::hash(const void *data, const size_t dataLength, void *resultArray)
{
    br_sha256_context context;
    br_sha256_init(&context);
    br_sha256_update(&context, data, dataLength);
    br_sha256_out(&context, resultArray);
    return resultArray;
}

String SHA256::hash(const String &message)
{
    uint8_t hashArray[NATURAL_LENGTH];
    hash(message.c_str(), message.length(), hashArray);
    return TypeCast::uint8ArrayToHexString(hashArray, NATURAL_LENGTH);
}

void *SHA256::hmac(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmac(&br_sha256_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA256::hmac(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmac(&br_sha256_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}

void *SHA256::hmacCT(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmacCT(&br_sha256_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA256::hmacCT(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmacCT(&br_sha256_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}


// #################### SHA-384 ####################

// resultArray must have size SHA384::NATURAL_LENGTH or greater
void *SHA384::hash(const void *data, const size_t dataLength, void *resultArray)
{
    br_sha384_context context;
    br_sha384_init(&context);
    br_sha384_update(&context, data, dataLength);
    br_sha384_out(&context, resultArray);
    return resultArray;
}

String SHA384::hash(const String &message)
{
    uint8_t hashArray[NATURAL_LENGTH];
    hash(message.c_str(), message.length(), hashArray);
    return TypeCast::uint8ArrayToHexString(hashArray, NATURAL_LENGTH);
}

void *SHA384::hmac(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmac(&br_sha384_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA384::hmac(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmac(&br_sha384_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}

void *SHA384::hmacCT(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmacCT(&br_sha384_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA384::hmacCT(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmacCT(&br_sha384_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}


// #################### SHA-512 ####################

// resultArray must have size SHA512::NATURAL_LENGTH or greater
void *SHA512::hash(const void *data, const size_t dataLength, void *resultArray)
{
    br_sha512_context context;
    br_sha512_init(&context);
    br_sha512_update(&context, data, dataLength);
    br_sha512_out(&context, resultArray);
    return resultArray;
}

String SHA512::hash(const String &message)
{
    uint8_t hashArray[NATURAL_LENGTH];
    hash(message.c_str(), message.length(), hashArray);
    return TypeCast::uint8ArrayToHexString(hashArray, NATURAL_LENGTH);
}

void *SHA512::hmac(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmac(&br_sha512_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA512::hmac(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmac(&br_sha512_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}

void *SHA512::hmacCT(const void *data, const size_t dataLength, const void *hashKey, const size_t hashKeyLength, void *resultArray, const size_t outputLength)
{
    return createBearsslHmacCT(&br_sha512_vtable, data, dataLength, hashKey, hashKeyLength, resultArray, outputLength);
}

String SHA512::hmacCT(const String &message, const void *hashKey, const size_t hashKeyLength, const size_t hmacLength)
{
    return createBearsslHmacCT(&br_sha512_vtable, NATURAL_LENGTH, message, hashKey, hashKeyLength, hmacLength);
}


// #################### MD5+SHA-1 ####################

// resultArray must have size MD5SHA1::NATURAL_LENGTH or greater
void *MD5SHA1::hash(const void *data, const size_t dataLength, void *resultArray)
{
    br_md5sha1_context context;
    br_md5sha1_init(&context);
    br_md5sha1_update(&context, data, dataLength);
    br_md5sha1_out(&context, resultArray);
    return resultArray;
}

String MD5SHA1::hash(const String &message)
{
    uint8_t hashArray[NATURAL_LENGTH];
    hash(message.c_str(), message.length(), hashArray);
    return TypeCast::uint8ArrayToHexString(hashArray, NATURAL_LENGTH);
}


// #################### HKDF ####################

HKDF::HKDF(const void *keyMaterial, const size_t keyMaterialLength, const void *salt, const size_t saltLength)
{
    init(keyMaterial, keyMaterialLength, salt, saltLength);
}

void HKDF::init(const void *keyMaterial, const size_t keyMaterialLength, const void *salt, const size_t saltLength)
{
    // Comments mainly from https://www.bearssl.org/apidoc/bearssl__kdf_8h.html

    // Initialize an HKDF context, with a hash function, and the salt. This starts the HKDF-Extract process.
    br_hkdf_init(&hkdfContext, &br_sha256_vtable, salt, saltLength);

    // Inject more input bytes. This function may be called repeatedly if the input data is provided by chunks, after br_hkdf_init() but before br_hkdf_flip().
    br_hkdf_inject(&hkdfContext, keyMaterial, keyMaterialLength);

    // End the HKDF-Extract process, and start the HKDF-Expand process.
    br_hkdf_flip(&hkdfContext);
}

size_t HKDF::produce(void *resultArray, const size_t outputLength, const void *info, const size_t infoLength)
{
    // Comments mainly from https://www.bearssl.org/apidoc/bearssl__kdf_8h.html

    // HKDF output production (HKDF-Expand).
    // Produces more output bytes from the current state. This function may be called several times, but only after br_hkdf_flip().
    // Returned value is the number of actually produced bytes. The total output length is limited to 255 times the output length of the underlying hash function.
    return br_hkdf_produce(&hkdfContext, info, infoLength, resultArray, outputLength);
}


// #################### Authenticated Encryption with Associated Data (AEAD) ####################


// #################### ChaCha20+Poly1305 AEAD ####################

void chacha20Poly1305Kernel(const int encrypt, void *data, const size_t dataLength, const void *key, const void *keySalt, const size_t keySaltLength,
                            const void *nonce, void *tag, const void *aad, const size_t aadLength)
{
    if (keySalt == nullptr)
    {
        br_poly1305_ctmul32_run(key, nonce, data, dataLength, aad, aadLength, tag, br_chacha20_ct_run, encrypt);
    }
    else
    {
        HKDF hkdfInstance(key, ENCRYPTION_KEY_LENGTH, keySalt, keySaltLength);
        uint8_t derivedEncryptionKey[ENCRYPTION_KEY_LENGTH] {0};
        hkdfInstance.produce(derivedEncryptionKey, ENCRYPTION_KEY_LENGTH);
        br_poly1305_ctmul32_run(derivedEncryptionKey, nonce, data, dataLength, aad, aadLength, tag, br_chacha20_ct_run, encrypt);
    }
}

void ChaCha20Poly1305::encrypt(void *data, const size_t dataLength, const void *key, const void *keySalt, const size_t keySaltLength,
                               void *resultingNonce, void *resultingTag, const void *aad, const size_t aadLength)
{
    uint8_t *nonce = (uint8_t *)resultingNonce;
    getNonceGenerator()(nonce, 12);

    chacha20Poly1305Kernel(1, data, dataLength, key, keySalt, keySaltLength, nonce, resultingTag, aad, aadLength);
}

bool ChaCha20Poly1305::decrypt(void *data, const size_t dataLength, const void *key, const void *keySalt, const size_t keySaltLength,
                               const void *encryptionNonce, const void *encryptionTag, const void *aad, const size_t aadLength)
{
    const uint8_t *oldTag = (const uint8_t *)encryptionTag;
    uint8_t newTag[16] {0};

    chacha20Poly1305Kernel(0, data, dataLength, key, keySalt, keySaltLength, encryptionNonce, newTag, aad, aadLength);

    for (uint32_t i = 0; i < sizeof newTag; ++i)
    {
        if (newTag[i] != oldTag[i])
        {
            return false;
        }
    }

    return true;
}
}
}