platformio.ini

; PlatformIO Project Configuration File
; Please visit documentation: https://docs.platformio.org/page/projectconf.html

[platformio]
# ------------------------------------------------------------------------------
# ENVIRONMENTS
#
# Please uncomment one of the lines below to select your board(s)
# (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example)
# ------------------------------------------------------------------------------

# Release / CI binaries
default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, esp32s2_saola, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB

# Build everything
; default_envs = esp32dev, esp8285_4CH_MagicHome, codm-controller-0.6-rev2, codm-controller-0.6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips

# Single binaries (uncomment your board)
; default_envs = elekstube_ips
; default_envs = nodemcuv2
; default_envs = esp8266_2m
; default_envs = esp01_1m_full
; default_envs = esp07
; default_envs = d1_mini
; default_envs = heltec_wifi_kit_8
; default_envs = h803wf
; default_envs = d1_mini_debug
; default_envs = d1_mini_ota
; default_envs = esp32dev
; default_envs = esp8285_4CH_MagicHome
; default_envs = esp8285_H801
; default_envs = d1_mini_5CH_Shojo_PCB
; default_envs = wemos_shield_esp32
; default_envs = m5atom
; default_envs = esp32_eth
; default_envs = esp32dev_qio80
; default_envs = esp32_eth_ota1mapp
; default_envs = esp32s2_saola

src_dir  = ./wled00
data_dir = ./wled00/data
build_cache_dir = ~/.buildcache
extra_configs =
  platformio_override.ini

[common]
# ------------------------------------------------------------------------------
# PLATFORM:
#   !! DO NOT confuse platformio's ESP8266 development platform with Arduino core for ESP8266
#
#   arduino core 2.6.3 = platformIO 2.3.2
#   arduino core 2.7.0 = platformIO 2.5.0
# ------------------------------------------------------------------------------
arduino_core_2_6_3 = espressif8266@2.3.3
arduino_core_2_7_4 = espressif8266@2.6.2
arduino_core_3_0_0 = espressif8266@3.0.0
arduino_core_3_2_0 = espressif8266@3.2.0
arduino_core_4_1_0 = espressif8266@4.1.0

# Development platforms
arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage

# Platform to use for ESP8266
platform_wled_default = ${common.arduino_core_4_1_0}
# We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
#platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
platform_packages = platformio/framework-arduinoespressif8266
                    platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
                    platformio/tool-esptool #@ ~1.413.0
                    platformio/tool-esptoolpy #@ ~1.30000.0

## previous platform for 8266, in case of problems with the new one
## you'll need  makuna/NeoPixelBus@ 2.6.9 for arduino_core_3_2_0, which does not support Ucs890x
;; platform_wled_default = ${common.arduino_core_3_2_0}
;; platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
;;                    platformio/toolchain-xtensa @ ~2.40802.200502
;;                    platformio/tool-esptool @ ~1.413.0
;;                    platformio/tool-esptoolpy @ ~1.30000.0

# ------------------------------------------------------------------------------
# FLAGS: DEBUG
#
# ------------------------------------------------------------------------------
debug_flags = -D DEBUG=1 -D WLED_DEBUG -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM
#if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h"
#-DDEBUG_ESP_CORE is not working right now

# ------------------------------------------------------------------------------
# FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld)
#    ldscript_2m1m (2048 KB) = 1019 KB sketch, 4 KB eeprom, 1004 KB spiffs, 16 KB reserved
#    ldscript_4m1m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 1002 KB spiffs, 16 KB reserved, 2048 KB empty/ota?
#
# Available lwIP variants (macros):
#    -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH  = v1.4 Higher Bandwidth (default)
#    -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY       = v2 Lower Memory
#    -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH = v2 Higher Bandwidth
#    -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
#
# BearSSL performance:
#  When building with -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL, please add `board_build.f_cpu = 160000000` to the environment configuration
#
# BearSSL ciphers:
#   When building on core >= 2.5, you can add the build flag -DBEARSSL_SSL_BASIC in order to build BearSSL with a limited set of ciphers:
#     TLS_RSA_WITH_AES_128_CBC_SHA256 / AES128-SHA256
#     TLS_RSA_WITH_AES_256_CBC_SHA256 / AES256-SHA256
#     TLS_RSA_WITH_AES_128_CBC_SHA / AES128-SHA
#     TLS_RSA_WITH_AES_256_CBC_SHA / AES256-SHA
#  This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m).
# ------------------------------------------------------------------------------
build_flags =
  -DMQTT_MAX_PACKET_SIZE=1024
  -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL
  -DBEARSSL_SSL_BASIC
  -D CORE_DEBUG_LEVEL=0
  -D NDEBUG
  -Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeoPixelBus
  #build_flags for the IRremoteESP8266 library (enabled decoders have to appear here)
  -D _IR_ENABLE_DEFAULT_=false
  -D DECODE_HASH=true
  -D DECODE_NEC=true
  -D DECODE_SONY=true
  -D DECODE_SAMSUNG=true
  -D DECODE_LG=true
  ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this breaks framework code on ESP32-C3 and ESP32-S2
  -DWLED_USE_MY_CONFIG
  ; -D USERMOD_SENSORSTOMQTT
  #For ADS1115 sensor uncomment following
  ; -D USERMOD_ADS1115

build_unflags =

build_flags_esp8266 = ${common.build_flags}  ${esp8266.build_flags}
build_flags_esp32   = ${common.build_flags}  ${esp32.build_flags}
build_flags_esp32_V4= ${common.build_flags}  ${esp32_idf_V4.build_flags}

ldscript_1m128k = eagle.flash.1m128.ld
ldscript_2m512k = eagle.flash.2m512.ld
ldscript_2m1m = eagle.flash.2m1m.ld
ldscript_4m1m = eagle.flash.4m1m.ld

[scripts_defaults]
extra_scripts =
  pre:pio-scripts/set_version.py
  post:pio-scripts/output_bins.py
  post:pio-scripts/strip-floats.py
  pre:pio-scripts/user_config_copy.py

# ------------------------------------------------------------------------------
# COMMON SETTINGS:
# ------------------------------------------------------------------------------
[env]
framework = arduino
board_build.flash_mode = dout
monitor_speed = 115200
# slow upload speed (comment this out with a ';' when building for development use)
upload_speed = 115200
# fast upload speed (remove ';' when building for development use)
; upload_speed = 921600

# ------------------------------------------------------------------------------
# LIBRARIES: required dependencies
#   Please note that we don't always use the latest version of a library.
#
#   The following libraries have been included (and some of them changed) in the source:
#     ArduinoJson@5.13.5, E131@1.0.0(changed), Time@1.5, Timezone@1.2.1
# ------------------------------------------------------------------------------
lib_compat_mode = strict
lib_deps =
    fastled/FastLED @ 3.5.0
    IRremoteESP8266 @ 2.8.2
    https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.7
  #For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line
    #TFT_eSPI
  #For use SSD1306 OLED display uncomment following
    #U8g2@~2.28.8
    #U8g2@~2.32.10
  #For Dallas sensor uncomment following 2 lines
    #OneWire@~2.3.5
    #milesburton/DallasTemperature@^3.9.0
  #For BME280 sensor uncomment following
    #BME280@~3.0.0
    ; adafruit/Adafruit BMP280 Library @ 2.1.0
    ; adafruit/Adafruit CCS811 Library @ 1.0.4
    ; adafruit/Adafruit Si7021 Library @ 1.4.0
  #For ADS1115 sensor uncomment following
    ; adafruit/Adafruit BusIO @ 1.13.2
    ; adafruit/Adafruit ADS1X15 @ 2.4.0

extra_scripts = ${scripts_defaults.extra_scripts}

[esp8266]
build_flags =
  -DESP8266
  -DFP_IN_IROM
  ;-Wno-deprecated-declarations
  -Wno-register  ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
  ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous
  -Wno-misleading-indentation
  ; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
  -DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
  ; lwIP 2 - Higher Bandwidth no Features
  ;  -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
  ; lwIP 1.4 - Higher Bandwidth (Aircoookie has)
  -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
  ; VTABLES in Flash
  -DVTABLES_IN_FLASH
  ; restrict to minimal mime-types
  -DMIMETYPE_MINIMAL

lib_deps =
  ${env.lib_deps}
  #https://github.com/lorol/LITTLEFS.git
  ESPAsyncTCP @ 1.2.2
  ESPAsyncUDP
  makuna/NeoPixelBus @ 2.7.3

[esp32]
#platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip
platform = espressif32@3.5.0

platform_packages = framework-arduinoespressif32 @ https://github.com/Aircoookie/arduino-esp32.git#1.0.6.4

build_flags = -g
  -DARDUINO_ARCH_ESP32
  #-DCONFIG_LITTLEFS_FOR_IDF_3_2
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  #use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
  -D LOROL_LITTLEFS
  ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3

default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv

lib_deps =
  ${env.lib_deps}
  https://github.com/lorol/LITTLEFS.git
  makuna/NeoPixelBus @ 2.7.3
  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0


[esp32_idf_V4]
;; experimental build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5
;; very similar to the normal ESP32 flags, but omitting Lorol LittleFS, as littlefs is included in the new framework already.
;;
;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
platform = espressif32@5.2.0
platform_packages =
build_flags = -g
  -DARDUINO_ARCH_ESP32 -DESP32
  #-DCONFIG_LITTLEFS_FOR_IDF_3_2
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
lib_deps =
  ${env.lib_deps}
  makuna/NeoPixelBus @ 2.7.3
  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0

[esp32s2]
;; generic definitions for all ESP32-S2 boards
platform = espressif32@5.2.0
platform_packages =
build_flags = -g
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32S2
  -DCONFIG_IDF_TARGET_ESP32S2=1
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
  -DCO
  -DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_CDC_ON_BOOT

lib_deps =
  ${env.lib_deps}
  makuna/NeoPixelBus @ 2.7.3
  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0

[esp32c3]
;; generic definitions for all ESP32-C3 boards
platform = espressif32@5.2.0
platform_packages =
build_flags = -g
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32C3
  -DCONFIG_IDF_TARGET_ESP32C3=1
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -DCO
  -DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_CDC_ON_BOOT

lib_deps =
  ${env.lib_deps}
  makuna/NeoPixelBus @ 2.7.3
  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0

[esp32s3]
;; generic definitions for all ESP32-S3 boards
platform = espressif32@5.2.0
platform_packages =
build_flags = -g
  -DESP32
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32S3
  -DCONFIG_IDF_TARGET_ESP32S3=1
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0
  -DCO
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT

lib_deps =
  ${env.lib_deps}
  ;; NeoPixelBus 2.7.1 is the first that has official support for ESP32-S3
  makuna/NeoPixelBus @ ~2.7.3
  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0


# ------------------------------------------------------------------------------
# WLED BUILDS
# ------------------------------------------------------------------------------

[env:nodemcuv2]
board = nodemcuv2
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D
lib_deps = ${esp8266.lib_deps}
monitor_filters = esp8266_exception_decoder

[env:esp8266_2m]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02
lib_deps = ${esp8266.lib_deps}

[env:esp01_1m_full]
board = esp01_1m
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA
lib_deps = ${esp8266.lib_deps}

[env:esp07]
board = esp07
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}

[env:d1_mini]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
upload_speed = 921600
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}
monitor_filters = esp8266_exception_decoder

[env:heltec_wifi_kit_8]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}

[env:h803wf]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
lib_deps = ${esp8266.lib_deps}

[env:esp32dev]
board = esp32dev
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET
lib_deps = ${esp32.lib_deps}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32.default_partitions}

[env:esp32dev_qio80]
board = esp32dev
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 #-D WLED_DISABLE_BROWNOUT_DET
lib_deps = ${esp32.lib_deps}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32.default_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = qio

[env:esp32dev_V4_dio80]
;; experimental ESP32 env using ESP-IDF V4.4.x
;; Warning: this build environment is not stable!!
;; please erase your device before installing.
board = esp32dev
platform = ${esp32_idf_V4.platform}
platform_packages = ${esp32_idf_V4.platform_packages}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags}  ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
lib_deps = ${esp32_idf_V4.lib_deps}
monitor_filters = esp32_exception_decoder
board_build.partitions = ${esp32_idf_V4.default_partitions}
board_build.f_flash = 80000000L
board_build.flash_mode = dio

[env:esp32_eth]
board = esp32-poe
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
upload_speed = 921600
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
lib_deps = ${esp32.lib_deps}
board_build.partitions = ${esp32.default_partitions}

[env:esp32s2_saola]
board = esp32-s2-saola-1
platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
platform_packages =
framework = arduino
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
board_build.flash_mode = qio
upload_speed = 460800
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
  -DARDUINO_USB_CDC_ON_BOOT=1
lib_deps = ${esp32s2.lib_deps}

[env:esp32c3dev]
extends = esp32c3
platform = ${esp32c3.platform}
platform_packages = ${esp32c3.platform_packages}
framework = arduino
board = esp32-c3-devkitm-1
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
  -D WLED_WATCHDOG_TIMEOUT=0
  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
upload_speed = 460800
build_unflags = ${common.build_unflags}
lib_deps = ${esp32c3.lib_deps}

[env:esp32s3dev_8MB]
;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
board = esp32-s3-devkitc-1
platform = ${esp32s3.platform}
platform_packages = ${esp32s3.platform_packages}
upload_speed = 921600 ; or  460800
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags}
  -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
  -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  ;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  ;-D WLED_DEBUG
lib_deps = ${esp32s3.lib_deps}
board_build.partitions = tools/WLED_ESP32_8MB.csv
board_build.f_flash = 80000000L
board_build.flash_mode = qio
; board_build.flash_mode = dio   ;; try this if you have problems at startup
monitor_filters = esp32_exception_decoder

[env:esp32s3dev_8MB_PSRAM]
;; ESP32-TinyS3 development board, with 8MB FLASH and 8MB PSRAM (memory_type: qio_opi, qio_qspi, or opi_opi)
;board = um_tinys3 ;    -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
;board = esp32s3box   ; -> error: 'esp32_adc2gpio' was not declared in this scope
board = esp32-s3-devkitc-1 ; -> compiles, but does not support PSRAM
platform = ${esp32s3.platform}
platform_packages = ${esp32s3.platform_packages}
upload_speed = 921600
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags}
  -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
  ;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  -D ARDUINO_USB_CDC_ON_BOOT=1  ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  ; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
  -D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
lib_deps = ${esp32s3.lib_deps}
board_build.partitions = tools/WLED_ESP32_8MB.csv
board_build.f_flash = 80000000L
board_build.flash_mode = qio
monitor_filters = esp32_exception_decoder

[env:esp8285_4CH_MagicHome]
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
lib_deps = ${esp8266.lib_deps}

[env:esp8285_H801]
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
lib_deps = ${esp8266.lib_deps}

[env:d1_mini_5CH_Shojo_PCB]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB
lib_deps = ${esp8266.lib_deps}

# ------------------------------------------------------------------------------
# DEVELOPMENT BOARDS
# ------------------------------------------------------------------------------

[env:d1_mini_debug]
board = d1_mini
build_type = debug
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
lib_deps = ${esp8266.lib_deps}

[env:d1_mini_ota]
board = d1_mini
upload_protocol = espota
# exchange for your WLED IP
upload_port = "10.10.1.27"
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}

[env:anavi_miracle_controller]
board = d1_mini
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
lib_deps = ${esp8266.lib_deps}

[env:lolin_s2_mini]
platform = ${esp32s2.platform}
platform_packages = ${esp32s2.platform_packages}
board = lolin_s2_mini
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
build_unflags = ${common.build_unflags} -DARDUINO_USB_CDC_ON_BOOT=1
build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=LolinS2
  -DBOARD_HAS_PSRAM
  -DARDUINO_USB_CDC_ON_BOOT=0
  -D WLED_USE_PSRAM
  -D WLED_WATCHDOG_TIMEOUT=0
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -D LEDPIN=16
  -D BTNPIN=18
  -D RLYPIN=9
  -D IRPIN=7
  -D HW_PIN_SCL=35
  -D HW_PIN_SDA=33
  -D HW_PIN_CLOCKSPI=7
  -D HW_PIN_DATASPI=11
  -D HW_PIN_MISOSPI=9
;  -D STATUSLED=15
lib_deps = ${esp32s2.lib_deps}

# ------------------------------------------------------------------------------
# custom board configurations
# ------------------------------------------------------------------------------

[env:esp32c3dev_2MB]
;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
;; this board need a specific partition file. OTA not possible.
extends = esp32c3
platform = ${esp32c3.platform}
platform_packages = ${esp32c3.platform_packages}
board = esp32-c3-devkitm-1
build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
  -D WLED_WATCHDOG_TIMEOUT=0
  -D WLED_DISABLE_OTA
  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
build_unflags = ${common.build_unflags}
upload_speed = 115200
lib_deps = ${esp32c3.lib_deps}
board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
board_build.flash_mode = dio

[env:wemos_shield_esp32]
board = esp32dev
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
upload_speed = 460800
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32}
  -D LEDPIN=16
  -D RLYPIN=19
  -D BTNPIN=17
  -D IRPIN=18
  -D UWLED_USE_MY_CONFIG
  -D USERMOD_DALLASTEMPERATURE
  -D USERMOD_FOUR_LINE_DISPLAY
  -D TEMPERATURE_PIN=23
  -D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
  -D USERMOD_AUDIOREACTIVE
lib_deps = ${esp32.lib_deps}
  OneWire@~2.3.5
  olikraus/U8g2 @ ^2.28.8
  https://github.com/blazoncek/arduinoFFT.git
board_build.partitions = ${esp32.default_partitions}

[env:m5atom]
board = esp32dev
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
lib_deps = ${esp32.lib_deps}
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
board_build.partitions = ${esp32.default_partitions}

[env:sp501e]
board = esp_wroom_02
platform = ${common.platform_wled_default}
board_build.ldscript = ${common.ldscript_2m512k}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
lib_deps = ${esp8266.lib_deps}

[env:sp511e]
board = esp_wroom_02
platform = ${common.platform_wled_default}
board_build.ldscript = ${common.ldscript_2m512k}
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
lib_deps = ${esp8266.lib_deps}

[env:Athom_RGBCW]        ;7w and 5w(GU10) bulbs
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
lib_deps = ${esp8266.lib_deps}


[env:Athom_15w_RGBCW]        ;15w bulb
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
lib_deps = ${esp8266.lib_deps}


[env:Athom_3Pin_Controller]        ;small controller with only data
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
lib_deps = ${esp8266.lib_deps}


[env:Athom_4Pin_Controller]       ; With clock and data interface
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
lib_deps = ${esp8266.lib_deps}


[env:Athom_5Pin_Controller]      ;Analog light strip controller
board = esp8285
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
lib_deps = ${esp8266.lib_deps}


[env:MY9291]
board = esp01_1m
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_1m128k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291
lib_deps = ${esp8266.lib_deps}

# ------------------------------------------------------------------------------
# codm pixel controller board configurations
# codm-controller-0.6 can also be used for the TYWE3S controller
# ------------------------------------------------------------------------------

[env:codm-controller-0.6]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_2m512k}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}

[env:codm-controller-0.6-rev2]
board = esp_wroom_02
platform = ${common.platform_wled_default}
platform_packages = ${common.platform_packages}
board_build.ldscript = ${common.ldscript_4m1m}
build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp8266}
lib_deps = ${esp8266.lib_deps}

# ------------------------------------------------------------------------------
# EleksTube-IPS
# ------------------------------------------------------------------------------
[env:elekstube_ips]
board = esp32dev
platform = ${esp32.platform}
platform_packages = ${esp32.platform_packages}
upload_speed = 921600
build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
  -D USERMOD_RTC
  -D USERMOD_ELEKSTUBE_IPS
  -D LEDPIN=12
  -D RLYPIN=27
  -D BTNPIN=34
  -D DEFAULT_LED_COUNT=6
  # Display config
  -D ST7789_DRIVER
  -D TFT_WIDTH=135
  -D TFT_HEIGHT=240
  -D CGRAM_OFFSET
  -D TFT_SDA_READ
  -D TFT_MOSI=23
  -D TFT_SCLK=18
  -D TFT_DC=25
  -D TFT_RST=26
  -D SPI_FREQUENCY=40000000
  -D USER_SETUP_LOADED
monitor_filters = esp32_exception_decoder
lib_deps =
  ${esp32.lib_deps}
  TFT_eSPI @ ^2.3.70
board_build.partitions = ${esp32.default_partitions}