Merge tag 'iio-fixes-for-6.3a' of https://git.kernel.org/pub/scm/linu…

…x/kernel/git/jic23/iio into char-misc-linus

Jonathan writes:

1st set of IIO fixes for 6.3

Usual mixed bag:

- core - output buffers
  Fix return of bytes written when only some succeed.
  Fix O_NONBLOCK handling to not block.

- adi,ad7791
  Fix IRQ type.  Not confirmed to have any impact but good to correct it anyway

- adi,adis16400
  Missing CONFIG_CRC32

- capella,cm32181
  Unregister 2nd I2C client if one is used.

- cio-dac
  Fix bitdepth for range check on write.

- linear,ltc2497
  Fix a wrong shift of the LSB introduced when switching to be24 handling.

- maxim,max11410
  Fix handling of return code in read_poll_timeout()

- qcom,spmi-adc
  Fix an accidental change of channel name to include the reg value from OF.

- ti,palmas
  Fix a null dereference on remove due to wrong function used to get the
  drvdata.

- ti,ads7950
  Mark GPIO as can sleep.

* tag 'iio-fixes-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip
  iio: adc: palmas_gpadc: fix NULL dereference on rmmod
  iio: adc: max11410: fix read_poll_timeout() usage
  iio: dac: cio-dac: Fix max DAC write value check for 12-bit
  iio: light: cm32181: Unregister second I2C client if present
  iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler
  iio: adc: ad7791: fix IRQ flags
  iio: buffer: make sure O_NONBLOCK is respected
  iio: buffer: correctly return bytes written in output buffers
  iio: light: vcnl4000: Fix WARN_ON on uninitialized lock
  iio: adis16480: select CONFIG_CRC32
  drivers: iio: adc: ltc2497: fix LSB shift
  iio: adc: qcom-spmi-adc5: Fix the channel name

drivers/iio/accel/kionix-kx022a.c

@@ -864,7 +864,7 @@ static irqreturn_t kx022a_trigger_handler(int irq, void *p)
 	if (ret < 0)
 		goto err_read;
 
-	iio_push_to_buffers_with_timestamp(idev, data->buffer, pf->timestamp);
+	iio_push_to_buffers_with_timestamp(idev, data->buffer, data->timestamp);
 err_read:
 	iio_trigger_notify_done(idev->trig);
 

drivers/iio/adc/ad7791.c

@@ -253,7 +253,7 @@ static const struct ad_sigma_delta_info ad7791_sigma_delta_info = {
 	.has_registers = true,
 	.addr_shift = 4,
 	.read_mask = BIT(3),
-	.irq_flags = IRQF_TRIGGER_LOW,
+	.irq_flags = IRQF_TRIGGER_FALLING,
 };
 
 static int ad7791_read_raw(struct iio_dev *indio_dev,

drivers/iio/adc/ltc2497.c

@@ -28,7 +28,6 @@ struct ltc2497_driverdata {
 	struct ltc2497core_driverdata common_ddata;
 	struct i2c_client *client;
 	u32 recv_size;
-	u32 sub_lsb;
 	/*
 	 * DMA (thus cache coherency maintenance) may require the
 	 * transfer buffers to live in their own cache lines.
@@ -65,10 +64,10 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata,
 		 * equivalent to a sign extension.
 		 */
 		if (st->recv_size == 3) {
-			*val = (get_unaligned_be24(st->data.d8) >> st->sub_lsb)
+			*val = (get_unaligned_be24(st->data.d8) >> 6)
 				- BIT(ddata->chip_info->resolution + 1);
 		} else {
-			*val = (be32_to_cpu(st->data.d32) >> st->sub_lsb)
+			*val = (be32_to_cpu(st->data.d32) >> 6)
 				- BIT(ddata->chip_info->resolution + 1);
 		}
 
@@ -122,7 +121,6 @@ static int ltc2497_probe(struct i2c_client *client)
 	st->common_ddata.chip_info = chip_info;
 
 	resolution = chip_info->resolution;
-	st->sub_lsb = 31 - (resolution + 1);
 	st->recv_size = BITS_TO_BYTES(resolution) + 1;
 
 	return ltc2497core_probe(dev, indio_dev);

drivers/iio/adc/max11410.c

@@ -414,13 +414,17 @@ static int max11410_sample(struct max11410_state *st, int *sample_raw,
 		if (!ret)
 			return -ETIMEDOUT;
 	} else {
+		int ret2;
+
 		/* Wait for status register Conversion Ready flag */
-		ret = read_poll_timeout(max11410_read_reg, ret,
-					ret || (val & MAX11410_STATUS_CONV_READY_BIT),
+		ret = read_poll_timeout(max11410_read_reg, ret2,
+					ret2 || (val & MAX11410_STATUS_CONV_READY_BIT),
 					5000, MAX11410_CONVERSION_TIMEOUT_MS * 1000,
 					true, st, MAX11410_REG_STATUS, &val);
 		if (ret)
 			return ret;
+		if (ret2)
+			return ret2;
 	}
 
 	/* Read ADC Data */
@@ -851,17 +855,21 @@ static int max11410_init_vref(struct device *dev,
 
 static int max11410_calibrate(struct max11410_state *st, u32 cal_type)
 {
-	int ret, val;
+	int ret, ret2, val;
 
 	ret = max11410_write_reg(st, MAX11410_REG_CAL_START, cal_type);
 	if (ret)
 		return ret;
 
 	/* Wait for status register Calibration Ready flag */
-	return read_poll_timeout(max11410_read_reg, ret,
-				 ret || (val & MAX11410_STATUS_CAL_READY_BIT),
-				 50000, MAX11410_CALIB_TIMEOUT_MS * 1000, true,
-				 st, MAX11410_REG_STATUS, &val);
+	ret = read_poll_timeout(max11410_read_reg, ret2,
+				ret2 || (val & MAX11410_STATUS_CAL_READY_BIT),
+				50000, MAX11410_CALIB_TIMEOUT_MS * 1000, true,
+				st, MAX11410_REG_STATUS, &val);
+	if (ret)
+		return ret;
+
+	return ret2;
 }
 
 static int max11410_self_calibrate(struct max11410_state *st)

drivers/iio/adc/palmas_gpadc.c

@@ -639,7 +639,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
 
 static int palmas_gpadc_remove(struct platform_device *pdev)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(&pdev->dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(&pdev->dev);
 	struct palmas_gpadc *adc = iio_priv(indio_dev);
 
 	if (adc->wakeup1_enable || adc->wakeup2_enable)

drivers/iio/adc/qcom-spmi-adc5.c

@@ -628,12 +628,20 @@ static int adc5_get_fw_channel_data(struct adc5_chip *adc,
 				    struct fwnode_handle *fwnode,
 				    const struct adc5_data *data)
 {
-	const char *name = fwnode_get_name(fwnode), *channel_name;
+	const char *channel_name;
+	char *name;
 	u32 chan, value, varr[2];
 	u32 sid = 0;
 	int ret;
 	struct device *dev = adc->dev;
 
+	name = devm_kasprintf(dev, GFP_KERNEL, "%pfwP", fwnode);
+	if (!name)
+		return -ENOMEM;
+
+	/* Cut the address part */
+	name[strchrnul(name, '@') - name] = '\0';
+
 	ret = fwnode_property_read_u32(fwnode, "reg", &chan);
 	if (ret) {
 		dev_err(dev, "invalid channel number %s\n", name);

drivers/iio/adc/ti-ads7950.c

@@ -634,6 +634,7 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	st->chip.label = dev_name(&st->spi->dev);
 	st->chip.parent = &st->spi->dev;
 	st->chip.owner = THIS_MODULE;
+	st->chip.can_sleep = true;
 	st->chip.base = -1;
 	st->chip.ngpio = TI_ADS7950_NUM_GPIOS;
 	st->chip.get_direction = ti_ads7950_get_direction;

drivers/iio/dac/cio-dac.c

@@ -66,8 +66,8 @@ static int cio_dac_write_raw(struct iio_dev *indio_dev,
 	if (mask != IIO_CHAN_INFO_RAW)
 		return -EINVAL;
 
-	/* DAC can only accept up to a 16-bit value */
-	if ((unsigned int)val > 65535)
+	/* DAC can only accept up to a 12-bit value */
+	if ((unsigned int)val > 4095)
 		return -EINVAL;
 
 	priv->chan_out_states[chan->channel] = val;

drivers/iio/imu/Kconfig

@@ -47,6 +47,7 @@ config ADIS16480
 	depends on SPI
 	select IIO_ADIS_LIB
 	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	select CRC32
 	help
 	  Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
 	  ADIS16485, ADIS16488 inertial sensors.

drivers/iio/industrialio-buffer.c

@@ -203,24 +203,27 @@ static ssize_t iio_buffer_write(struct file *filp, const char __user *buf,
 				break;
 			}
 
+			if (filp->f_flags & O_NONBLOCK) {
+				if (!written)
+					ret = -EAGAIN;
+				break;
+			}
+
 			wait_woken(&wait, TASK_INTERRUPTIBLE,
 					MAX_SCHEDULE_TIMEOUT);
 			continue;
 		}
 
 		ret = rb->access->write(rb, n - written, buf + written);
-		if (ret == 0 && (filp->f_flags & O_NONBLOCK))
-			ret = -EAGAIN;
+		if (ret < 0)
+			break;
 
-		if (ret > 0) {
-			written += ret;
-			if (written != n && !(filp->f_flags & O_NONBLOCK))
-				continue;
-		}
-	} while (ret == 0);
+		written += ret;
+
+	} while (written != n);
 	remove_wait_queue(&rb->pollq, &wait);
 
-	return ret < 0 ? ret : n;
+	return ret < 0 ? ret : written;
 }
 
 /**

drivers/iio/light/cm32181.c

@@ -429,6 +429,14 @@ static const struct iio_info cm32181_info = {
 	.attrs			= &cm32181_attribute_group,
 };
 
+static void cm32181_unregister_dummy_client(void *data)
+{
+	struct i2c_client *client = data;
+
+	/* Unregister the dummy client */
+	i2c_unregister_device(client);
+}
+
 static int cm32181_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
@@ -460,6 +468,10 @@ static int cm32181_probe(struct i2c_client *client)
 		client = i2c_acpi_new_device(dev, 1, &board_info);
 		if (IS_ERR(client))
 			return PTR_ERR(client);
+
+		ret = devm_add_action_or_reset(dev, cm32181_unregister_dummy_client, client);
+		if (ret)
+			return ret;
 	}
 
 	cm32181 = iio_priv(indio_dev);

drivers/iio/light/vcnl4000.c

@@ -208,7 +208,6 @@ static int vcnl4000_init(struct vcnl4000_data *data)
 
 	data->rev = ret & 0xf;
 	data->al_scale = 250000;
-	mutex_init(&data->vcnl4000_lock);
 
 	return data->chip_spec->set_power_state(data, true);
 };
@@ -1367,6 +1366,8 @@ static int vcnl4000_probe(struct i2c_client *client)
 	data->id = id->driver_data;
 	data->chip_spec = &vcnl4000_chip_spec_cfg[data->id];
 
+	mutex_init(&data->vcnl4000_lock);
+
 	ret = data->chip_spec->init(data);
 	if (ret < 0)
 		return ret;