Super-exe

An interface to the Mifare Super (Suppa/Supper) Card utilising the libnfc 1.7.1 library. Many super-card card programs are either broken / wrong type / or written in Chinese. This is a simple English (American) Language program to faciliate non-Chinese users.

This program has been tested successfully on the USB ACR-122U reader on the following operating systems:

• WinXP (32bit) SP0/1/2/3
• Vista (32bit) SP0/1/2

Note: From Windows 7+ Microsoft changed the way smartcard drivers operate, and I havnt figured out how to support the later versions of Windows.

The program has two modes read & write, these operations are detailed below...

Usage

Set a UID

Using the '-w' flag set a 4-byte (8 hex chars) UID

$ nfc-super.exe -w 22334455
Mifare Super Card v0.1 (C)2014 Andy
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  04
       UID (NFCID1): 11  22  33  44
      SAK (SEL_RES): 08

Operation

Place the card upto a Mifare reader, and ensure you obtain two or more (2+) failed authentication attempts.

Obtain data and crack key

Place the super-card on the reader, launch the program with the '-r' flag, the program should automatically obtain the necessary values and crack the reader key.

$ nfc-super.exe -r
Mifare Super Card v0.1 (C)2014 Andy
ISO/IEC 14443A (106 kbps) target:
    ATQA (SENS_RES): 00  04
       UID (NFCID1): 22  33  44  55
      SAK (SEL_RES): 08
 UID: 22  33  44  55
1:NR: c9  6f  2e  a5
1:AR: 71  67  3d  4d
2:NR: 38  aa  fa  ba
2:AR: 5d  32  cd  f4
Cracking...
Found Key: [e5b20aeeffff]

Further cracking

Use the Mifare nested attack (or mfoc.exe) to crack any remaining keys on a genuine card.