Welcome to Tay's Flipper Zero Firmware!

This firmware is a fork from DarkFlippers/unleashed-firmware

This software is for experimental purposes only and is not meant for any illegal activity/purposes.
I do not condone illegal activity and strongly encourage keeping transmissions to legal/valid uses allowed by law.
Also, this software is made without any support from Flipper Devices and is in no way related to the official devs.

What's changed

Tay's Version

• D&D style leveling system. Deed's and app limits scale with your Flipper's level.

Core Unleashed Firmware

• Sub-GHz lib & hal

  • Regional TX restrictions removed
  • Extra Sub-GHz frequencies
  • Frequency range can be extended in settings file (Warning: It can damage Flipper's hardware)
  • Many rolling code protocols now have the ability to save & send captured signals
  • FAAC SLH (Spa) & BFT Mitto (keeloq secure with seed) manual creation
  • External CC1101 module support (by quen0n)

• Sub-GHz Main App

  • Save last used frequency (by derskythe)
  • New frequency analyzer (by ClusterM)
  • Press OK in frequency analyzer to use detected frequency in Read modes (by derskythe)
  • Long press OK button in Sub-GHz Frequency analyzer to switch to Read menu (by derskythe)
  • New option to use timestamps + protocol name when you saving file, instead of random name or timestamp only - Enable in Radio Settings -> Protocol Names = ON
  • Read mode UI improvements (shows time when signal was received) (by @wosk)
  • External CC1101 module support (Hardware SPI used)
  • Hold right in received signal list to delete selected signal
  • Custom buttons for Keeloq / Alutech AT4N / Nice Flor S / Somfy Telis / Security+ 2.0 / CAME Atomo - now you can use arrow buttons to send signal with different button code
  • Add manually menu extended with new protocols
  • FAAC SLH, BFT Mitto / Somfy Telis / Nice Flor S / CAME Atomo, etc.. manual creation with programming new remote into receiver (use button 0xF for BFT Mitto, 0x8 (Prog) on Somfy Telis, (right arrow button for other protocols))
  • Debug mode counter increase settings (+1 -> +5, +10, default: +1)
  • Debug PIN output settings for protocol development

• Sub-GHz apps by unleashed team

  • Sub-GHz Bruteforce - static code brute-force plugin |
    • Time delay (between signals) setting (hold Up in main screen(says Up to Save)) + configure repeats in protocols list by pressing right button on selected protocol
    • Load your own file and select bytes you want to bruteforce or use preconfigured options in protocols list
  • Sub-GHz Remote - remote control for 5 sub-ghz files | bind one file for each button
    • use the built-in constructor or make config file by following this instruction

• Infrared

  • Recompiled IR TV Universal Remote for ALL buttons
  • Universal remotes for Projectors, Fans, A/Cs and Audio(soundbars, etc.) -> Also always updated and verified by our team
  • Infrared -> RCA Protocol
  • Infrared -> Debug TX PIN output settings

• NFC/RFID/iButton

  • LFRFID/iButton Fuzzer plugins
  • Extra Mifare Classic keys
  • EMV Protocol + Public data parser (by @Leptopt1los and @wosk)
  • NFC/LFRFID - Stop emulation after 5 mins to avoid antenna damage (by @Leptopt1los)
  • NFC Add manually -> Mifare Classic with custom UID
  • NFC parsers: Umarsh, Zolotaya Korona, Kazan, Metromoney, Moscow Social Card, Troika (reworked) and many others (by @Leptopt1los and @assasinfil)

• Quality of life & other features

  • Customizable Flipper name Update! Now can be changed in Settings->Desktop (by @xMasterX and @Willy-JL)
  • Text Input UI element -> Cursor feature (by @Willy-JL)
  • Byte Input Mini editor -> Press UP multiple times until the nibble editor appears (by @gid9798)
  • Clock on Desktop -> Settings -> Desktop -> Show Clock (by @gid9798)
  • Battery percentage display with different styles Settings -> Desktop -> Battery View
  • More games in Dummy Mode -> click or hold any of arrow buttons
  • Lock device with pin(or regular lock if pin not set) by holding UP button on main screen (by an4tur0r)
  • BadBT plugin (BT version of BadKB) (by Willy-JL, ClaraCrazy, XFW contributors) - (See in Applications->Tools) - (aka BadUSB via Bluetooth)
  • BadUSB -> Keyboard layouts (by rien > dummy-decoy)
  • Custom community plugins and games added + all known working apps can be downloaded in extra pack in every release
  • Other small fixes and changes throughout
  • See other changes in readme below

Also check the changelog in releases for latest updates!

Current modified and new Sub-GHz protocols list:

Thanks to Official team (to their SubGHz Developer, Skorp) for implementing decoders for these protocols in OFW.

Keeloq [Not ALL systems supported for decode or emulation!] - Supported manufacturers list

Encoders or sending made by @xMasterX:

• Nero Radio 57bit (+ 56bit encoder improvements)
• CAME 12bit/24bit encoder fixes (Fixes now merged in OFW)
• Keeloq: Dea Mio, Genius Bravo, GSN, HCS101, AN-Motors, JCM Tech, MHouse, Nice Smilo, DTM Neo, FAAC RC,XT, Mutancode, Normstahl, Beninca + Allmatic, Stilmatic, CAME Space, Aprimatic (model TR and similar), Centurion Nova (thanks Carlos !)

Encoders or sending made by @Eng1n33r(first implementation in Q2 2022) & @xMasterX (current version):

• CAME Atomo -> Update! check out new instructions
• Nice Flor S -> How to create new remote - instructions
• FAAC SLH (Spa) -> Update!!! Check out new instructions
• Keeloq: BFT Mitto -> Update! Check out new instructions
• Star Line
• Security+ v1 & v2 (encoders was made in OFW)

Encoders made by @assasinfil & @xMasterX:

• Somfy Telis -> How to create new remote - instructions
• Somfy Keytis
• KingGates Stylo 4k
• Alutech AT-4N -> How to create new remote - instructions
• Nice ON2E (Nice One) -> How to create new remote - instructions

Instructions

First look at official docs docs.flipper.net

How to install - versions info: n, ,e...

Firmware & Development

- How to build | Project-structure

- CLion IDE - How to setup workspace for flipper firmware development by Savely Krasovsky

- "Hello world!" - plugin tutorial English _{by DroomOne} | Russian _{by Pavel Yakovlev}

- How to write your own app. Docs by atmanos ⚠️outdated API

Firmware & main Apps feature

- System: How to change Flipper name

- BadUSB: How to add new keyboard layouts

- Infrared: How to make captures to add them into Universal IR remotes

Sub-GHz

- How to use Flipper as new remote (Nice FlorS, BFT Mitto, Somfy Telis, Aprimatic, AN-Motors, etc..)

- External Radio: How to connect CC1101 module

- Transmission is blocked? How to extend Sub-GHz frequency range

- How to add extra Sub-GHz frequencies

- Configure Sub-GHz Remote App Not recommended, please use embedded configurator

Plugins

- TOTP (Authenticator): config description

- Barcode Generator: How to use

- Multi Converter: How to use

- WAV Player: sample files & how to convert

- Sub-GHz playlist: generator script

Plugins that works with external hardware [GPIO]

- Unitemp - Temperature sensors reader: How to use & supported sensors

- [NMEA] GPS: How to use

- i2c Tools How to use

- [NRF24] plugins: How to use

- [WiFi] Scanner: How to use | Web Flasher

- [ESP8266] Deauther: How to use | Web Flasher

- [ESP32] WiFi Marauder: How to use _{docs by UberGuidoZ} | Marauder repo

- [ESP32-CAM] Camera Suite: How to use

- How to Upload .bin to ESP32/ESP8266: Windows | FAP "ESP flasher"

- [GPIO] SentrySafe plugin: How to use

Where I can find IR, Sub-GHz, ... files, DBs, and other stuff?

UberGuidoZ Playground - Large collection of files - Github

Awesome Flipper Zero - Github

Links

• Official Docs: docs.flipper.net
• Official Forum: forum.flipperzero.one

Project structure

• applications - Applications and services used in firmware
• assets - Assets used by applications and services
• furi - Furi Core: OS-level primitives and helpers
• debug - Debug tool: GDB-plugins, SVD-file and etc
• documentation - Documentation generation system configs and input files
• firmware - Firmware source code
• lib - Our and 3rd party libraries, drivers and etc...
• site_scons - Build helpers
• scripts - Supplementary scripts and python libraries home

Also, pay attention to the ReadMe.md files inside those directories.