Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/gerg/m68knommu

Pull m68k arch fixes from Greg Ungerer:
 "This contains four fixes for 3.4.  Two fix and clean up compilation
  for the nommu 68x328 CPU targets.  The other two fix the platform
  definition and multi-function pin setup of the second eth interface
  on the ColdFire 5275 SoC."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFire
  m68knommu: fix id number for second eth device on 5275 ColdFire
  m68knommu: move and fix the 68VZ328 platform bootlogo.h
  m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328

arch/m68k/configs/m5275evb_defconfig

@@ -49,7 +49,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC=y
-CONFIG_FEC2=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=y

arch/m68k/platform/527x/config.c

@@ -74,9 +74,7 @@ static void __init m527x_fec_init(void)
 	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
 	v = readb(MCF_IPSBAR + 0x100078);
 	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
-#endif
 
-#ifdef CONFIG_FEC2
 	/* Set multi-function pins to ethernet mode for fec1 */
 	par = readw(MCF_IPSBAR + 0x100082);
 	writew(par | 0xa0, MCF_IPSBAR + 0x100082);

arch/m68k/platform/68EZ328/Makefile

@@ -3,9 +3,3 @@
 #
 
 obj-y := config.o
-
-extra-y := bootlogo.rh
-
-$(obj)/bootlogo.rh: $(src)/bootlogo.h
-	perl $(src)/../68328/bootlogo.pl < $(src)/bootlogo.h \
-		> $(obj)/bootlogo.rh

arch/m68k/platform/68VZ328/Makefile

@@ -3,14 +3,9 @@
 #
 
 obj-y		:= config.o
-logo-$(UCDIMM)	:= bootlogo.rh
-logo-$(DRAGEN2)	:= screen.h
-extra-y		:= $(logo-y)
-
-$(obj)/bootlogo.rh: $(src)/../68EZ328/bootlogo.h
-	perl $(src)/bootlogo.pl < $(src)/../68328/bootlogo.h > $(obj)/bootlogo.rh
+extra-$(DRAGEN2):= screen.h
 
 $(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl
 	perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h
 
-clean-files := $(obj)/screen.h $(obj)/bootlogo.rh
+clean-files := $(obj)/screen.h

arch/m68k/platform/68EZ328/bootlogo.h → arch/m68k/platform/68VZ328/bootlogo.h

@@ -1,6 +1,6 @@
 #define splash_width 640
 #define splash_height 480
-static unsigned char splash_bits[] = {
+unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = {
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

arch/m68k/platform/coldfire/device.c

@@ -114,7 +114,7 @@ static struct resource mcf_fec1_resources[] = {
 
 static struct platform_device mcf_fec1 = {
 	.name			= "fec",
-	.id			= 0,
+	.id			= 1,
 	.num_resources		= ARRAY_SIZE(mcf_fec1_resources),
 	.resource		= mcf_fec1_resources,
 };