Merge tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/groeck/linux-staging into master

Pull hwmon fixes from Guenter Roeck:

 - Using SCT on some Tohsiba drives causes firmware hangs. Disable its
   use in the drivetemp driver.

 - Handle potential buffer overflows in scmi and aspeed-pwm-tacho
   driver.

 - Energy reporting does not work well on all AMD CPUs. Restrict
   amd_energy to known working models.

 - Enable reading the CPU temperature on NCT6798D using undocumented
   registers.

 - Fix read errors seen if PEC is enabled in adm1275 driver.

 - Fix setting the pwm1_enable in emc2103 driver.

* tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
  hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
  hwmon: (adm1275) Make sure we are reading enough data for different chips
  hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
  hwmon: (amd_energy) match for supported models
  hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow

drivers/hwmon/amd_energy.c

@@ -362,7 +362,7 @@ static struct platform_driver amd_energy_driver = {
 static struct platform_device *amd_energy_platdev;
 
 static const struct x86_cpu_id cpu_ids[] __initconst = {
-	X86_MATCH_VENDOR_FAM(AMD, 0x17, NULL),
+	X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x17, 0x31, NULL),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, cpu_ids);

drivers/hwmon/aspeed-pwm-tacho.c

@@ -851,6 +851,8 @@ static int aspeed_create_fan(struct device *dev,
 	ret = of_property_read_u32(child, "reg", &pwm_port);
 	if (ret)
 		return ret;
+	if (pwm_port >= ARRAY_SIZE(pwm_port_params))
+		return -EINVAL;
 	aspeed_create_pwm_port(priv, (u8)pwm_port);
 
 	ret = of_property_count_u8_elems(child, "cooling-levels");

drivers/hwmon/drivetemp.c

@@ -285,6 +285,42 @@ static int drivetemp_get_scttemp(struct drivetemp_data *st, u32 attr, long *val)
 	return err;
 }
 
+static const char * const sct_avoid_models[] = {
+/*
+ * These drives will have WRITE FPDMA QUEUED command timeouts and sometimes just
+ * freeze until power-cycled under heavy write loads when their temperature is
+ * getting polled in SCT mode. The SMART mode seems to be fine, though.
+ *
+ * While only the 3 TB model (DT01ACA3) was actually caught exhibiting the
+ * problem let's play safe here to avoid data corruption and ban the whole
+ * DT01ACAx family.
+
+ * The models from this array are prefix-matched.
+ */
+	"TOSHIBA DT01ACA",
+};
+
+static bool drivetemp_sct_avoid(struct drivetemp_data *st)
+{
+	struct scsi_device *sdev = st->sdev;
+	unsigned int ctr;
+
+	if (!sdev->model)
+		return false;
+
+	/*
+	 * The "model" field contains just the raw SCSI INQUIRY response
+	 * "product identification" field, which has a width of 16 bytes.
+	 * This field is space-filled, but is NOT NULL-terminated.
+	 */
+	for (ctr = 0; ctr < ARRAY_SIZE(sct_avoid_models); ctr++)
+		if (!strncmp(sdev->model, sct_avoid_models[ctr],
+			     strlen(sct_avoid_models[ctr])))
+			return true;
+
+	return false;
+}
+
 static int drivetemp_identify_sata(struct drivetemp_data *st)
 {
 	struct scsi_device *sdev = st->sdev;
@@ -326,6 +362,13 @@ static int drivetemp_identify_sata(struct drivetemp_data *st)
 	/* bail out if this is not a SATA device */
 	if (!is_ata || !is_sata)
 		return -ENODEV;
+
+	if (have_sct && drivetemp_sct_avoid(st)) {
+		dev_notice(&sdev->sdev_gendev,
+			   "will avoid using SCT for temperature monitoring\n");
+		have_sct = false;
+	}
+
 	if (!have_sct)
 		goto skip_sct;
 

drivers/hwmon/emc2103.c

@@ -443,7 +443,7 @@ static ssize_t pwm1_enable_store(struct device *dev,
 	}
 
 	result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
-	if (result) {
+	if (result < 0) {
 		count = result;
 		goto err;
 	}

drivers/hwmon/nct6775.c

@@ -786,13 +786,13 @@ static const char *const nct6798_temp_label[] = {
 	"Agent1 Dimm1",
 	"BYTE_TEMP0",
 	"BYTE_TEMP1",
-	"",
-	"",
+	"PECI Agent 0 Calibration",	/* undocumented */
+	"PECI Agent 1 Calibration",	/* undocumented */
 	"",
 	"Virtual_TEMP"
 };
 
-#define NCT6798_TEMP_MASK	0x8fff0ffe
+#define NCT6798_TEMP_MASK	0xbfff0ffe
 #define NCT6798_VIRT_TEMP_MASK	0x80000c00
 
 /* NCT6102D/NCT6106D specific data */

drivers/hwmon/pmbus/adm1275.c

@@ -465,6 +465,7 @@ MODULE_DEVICE_TABLE(i2c, adm1275_id);
 static int adm1275_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	s32 (*config_read_fn)(const struct i2c_client *client, u8 reg);
 	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
 	int config, device_config;
 	int ret;
@@ -510,11 +511,16 @@ static int adm1275_probe(struct i2c_client *client,
 			   "Device mismatch: Configured %s, detected %s\n",
 			   id->name, mid->name);
 
-	config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+	if (mid->driver_data == adm1272 || mid->driver_data == adm1278 ||
+	    mid->driver_data == adm1293 || mid->driver_data == adm1294)
+		config_read_fn = i2c_smbus_read_word_data;
+	else
+		config_read_fn = i2c_smbus_read_byte_data;
+	config = config_read_fn(client, ADM1275_PMON_CONFIG);
 	if (config < 0)
 		return config;
 
-	device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG);
+	device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG);
 	if (device_config < 0)
 		return device_config;
 

drivers/hwmon/scmi-hwmon.c

@@ -147,7 +147,7 @@ static enum hwmon_sensor_types scmi_types[] = {
 	[ENERGY] = hwmon_energy,
 };
 
-static u32 hwmon_attributes[] = {
+static u32 hwmon_attributes[hwmon_max] = {
 	[hwmon_chip] = HWMON_C_REGISTER_TZ,
 	[hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL,
 	[hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,