v5.0.1

5.0.1 20170429
* Adjust Sonoff SC messages to prepare for display feature
* Move static data from RAM to Flash
* Fix PowerOnState for some devices not reporting "Power on" state
(arendst#284, arendst#380, arendst#383)

v5.0.0

5.0.0 20170425
* Memory status message update
* Fix setting migration to better preserve settings during move (arendst#382)
* Best practice is first doing a Backup Configuration before installing
version 5.0.0
* Reset save count after setting move
* Start using new linker script without SPIFFS

v4.2.0

4.2.0 20170424
* Prepare for SPIFFS removal by moving settings to EEPROM area
* Fix compilation error when webserver is disabled (arendst#378)

v4.1.3

4.1.3 20170410
* Add user configuarble GPIO to module S20 Socket and Slampher
* Add support for Sonoff SC (arendst#112)
* Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led
firmware (arendst#122)
* Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions
due to power supply instabilities (arendst#122)
* Add Access Point Mac Address to Status 11 and Telemetry (arendst#329)
* Fix DS18B20 negative temperature readings (arendst#334)

v4.1.2

4.1.2 20170403
* Rename Unrecognised command to Unknown command
* Remove all command lists
* Remove command SmartConfig (superseded by WifiConfig)
* Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non
ESP8285 hardware
* Add optional support for Toshiba and Mitsubishi HVAC IR control (needs
updated IRremote8266 library) (arendst#83, arendst#257)
* Add all configured switches to Domoticz Configuration web page (arendst#305)
* Fix compile error when selecting WS2812 DMA (arendst#313)

v4.1.1

4.1.1 20170329
* Fix default Telemetry for command Prefix3
* Fix webserver Module parameters for disabled select
* Fix sensor status for enabled switches
* Remove Light as alternative for Power (save code space)
* Remove migration option from pre V3 (code cleanup)
* Remove unofficial SPIFFS support (code cleanup)
* Remove command list when unknown command is entered (save code space)
* Rename Status11 json from StatusPWR to unique StatusSTS
* Rename command Gateway to IPAddres2, Subnetmask to IPAddress3 and
DnsServer to IPAddress4 (save code space)
* Add Command MqttResponse to select either command or RESULT topic as
response (arendst#258)
* Add command StateText1 to StateText3 to assign MQTT_STATUS_OFF,
MQTT_STATUS_ON and MQTT_CMND_TOGGLE respectively (arendst#286)
* Remove restart after IPAddress changes (arendst#292)
* Add support for MAX31850 in xsns_ds18x20.ino (arendst#295)
* Fix possible uptime update misses (arendst#302)

v4.1.0

4.1.0 20170325
* Change static IP addresses in user_config.h from list (using commas)
to string (using dots)
* Unify display result of commands Modules, Module and Gpios
* Rewrite Module selection web page to bring size down from 18651 to
4319 bytes (!) (arendst#234, arendst#240)
* Add basic support for (Lixada) H801 RGBWW controller (arendst#252)
* Add command Prefix1 to Prefix3 to assign SUB_PREFIX, PUB_PREFIX and
PUB_PREFIX2 respectively (arendst#255)
* Add static ip addresses to flash (arendst#262)
* Add commands IpAddress, Gateway, Subnetmask and DnsServer to select
static ip addresses (arendst#273)

v4.0.8

4.0.8 20170321
* Fix entering non-numeric webpassword
* Force selection between TLS or Webserver due to memory restraint
(arendst#240)
* Allow entering empty string using "0" for selected commands (arendst#242)
* Fix exception when posting commands to web console containing % (arendst#250)

v4.0.7

4.0.7 20170319
* Increased Sonoff Led PWM frequency from 432 to 1000
* Fix possible watch dog reboot after changing module type on web page
* Fix reporting of GPIO usage from web page
* Fix Sonoff Led blank during firmware upgrade
* Fix Sonoff Led flicker and possible flash corruption by using latest
Arduino-esp8266 versions
*   of pwm core files included in sonoff library (arendst#211)
* Add PWM output control with commands PWM1 to PWM5 using user
selectable GPIOs (arendst#211)
* Fix exceptions due to low values of commands HlwPCal (10000), HlwUCal
(1000) and HlwICal (2500) (arendst#223)
* Add Switch state to sensor status (arendst#227, arendst#233)
* Add user configuarble GPIO to module Sonoff Touch (arendst#228)
* Add define WEB_PORT to user_config.h to change default web server port
from 80 (arendst#232)
* Fix failed Ota Firmware upgrade started from Web page (arendst#235)

v4.0.6

4.0.6 20170316
* Fix to better find device by Wifi hostname
* Fix compile error when some I2C devices are disabled
* Add (experimental) support for SHT1X emulating I2C (arendst#97)
* Add ADC to ElectroDragon (arendst#203)
* Add support for Sonoff Dev (arendst#206)