Skip to content

Latest commit

 

History

History
70 lines (52 loc) · 3.08 KB

readme_en.md

File metadata and controls

70 lines (52 loc) · 3.08 KB
Raw

Directory

- English

- 中文

Changelog

  • 20240513 Newly created repositories support ARCH 64 devices by default
  • 20240514 Added support for x86 and cortex-a7 architectures, thanks again to xfangfang/PPPwn_cpp
  • 20240522 Added 10.00 10.01 goldehen support, modified 9.0 11.00 10.00 10.01 stage2.bin to support GoldHEN_v2.4b17.2 Thanks sistr0.To update the PPPwn_cpp process synchronously, please refer to https://github.com/xfangfang/PPPwn_cpp.git for the PPPwn_cpp update section.
  • 202440605 To update the PPPwn_cpp procedure, please refer to https://github.com/xfangfang/PPPwn_cpp.gitfor the PPPwn_cpp update section.

PPPwn orangepi

This script was initially tested on the orangepi5 debian system running PPPwn vulnerability, and the effect of automatic cracking was achieved. Now it supports x86, aarch64, armv7 architecture chips, and other systems should adjust the boot script.

Test equipment

  • JDC AX1800pro (openwrt) only runs the test, does not test the automatic shutdown and boot automatic cracking, if the prompt sudo: not found is prompted, please delete the sudo character in the run.sh
  • Orangepi 5 (debian)
  • nanopi neo2 (armbian)
  • Works with all devices based on aarch64 architecture (Debian/Armbian)
  • Works on all devices with x86_64 architectures (Debian/Armbian)
  • Compatible with all devices with ARMv7 (Cortex-A7) architecture (Debian/Armbian)

Preparation

Before the automatic cracking, if it is the first crack, you should place the GOLDHEN.bin file that supports the PS4 system version in the USB flash drive root directory of exfat, and insert it into the USB port of PS4. This step is not required after that.

sudo apt update
sudo apt install git -y
cd /root/
git clone https://github.com/LYU4662/PPPwn_orangepi.git
cd PPPwn_orangepi/
sudo chmod 777 *
sudo bash setup.sh

Then modify some definitions of vim run.sh in the run.sh, such as the network port used, the system version, whether it will automatically shut down after the cracking is completed, etc. Use i to enter editing mode, use escto exit editing mode after editing, and enter :wq to save.

INTERFACE="end0" #You can view the interface through (ip a)
FIRMWAREVERSION="11.00"
SHUTDOWN=true

Run the test

Once you've done the above,sudo bash run.sh to test. If the following appears, it means that it can run normally, and the cracked program can be run at this time.

root@nanopineo2:~/PPPwn_orangepi# sudo bash run.sh
 _____ _____ _____                                          _
|  _  |  _  |  _  |_ _ _ ___    ___ ___ ___ ___ ___ ___ ___|_|
|   __|   __|   __| | | |   |  | . |  _| .'|   | . | -_| . | |
|__|  |__|  |__|  |_____|_|_|  |___|_| |__,|_|_|_  |___|  _|_|
                                               |___|   |_|
https://github.com/LYU4662/PPPwn_orangepi.git
Thanks to https://github.com/xfangfang/PPPwn_cpp.git
         https://github.com/TheOfficialFloW/PPPwn.git
         https://github.com/stooged/PI-Pwn.git
         https://github.com/PSGO/PPPwnGo.git

Ready for console connection
Firmware: 11.00
Interface: end0