for now this only works on linux, but feel free to create a PR to support your platform
- install WLED on the Esp. You can find great tutorials online or look at their wiki
If you want to install a binary, please take a look at the releases page
To install it from source you'll first need to install Go and clone the repo
git clone https://github.com/Martijn-Faber/ambilight.gitafter that you'll need to rename the config.env.example to config.env and set all the variables. the next step is to install all the dependencies by running go get in your terminal. To build the binary you can run go build and to run it you can do ./ambilight in your terminal.
feel free to contribute to this project check CONTRIBUTING before you commiting
| Type | Voltage | Comments |
|---|---|---|
| WS2812B | 5v | |
| WS2813 | 5v | |
| SK6812 | 5v | RGBW |
| APA102 | 5v | C/D |
| WS2801 | 5v | C/D |
| LPD8806 | 5v | C/D |
| TM1814 | 12v | RGBW |
| WS2811 | 12v | 3-LED segments |
| WS2815 | 12v | |
| GS8208 | 12v | |
| Analog/non-addressable | any | Requires additional circuitry |
this project is licensed under the MIT license