Probe for hardware, check operability and find drivers

This integration allows you to control and monitor your Aladdin Connect garage door opener using Home Assistant. It provides seamless integration and easy configuration through the Home Assistant UI.

Cross-platform desktop app for WLED

ConnectLife integration for Home Assistant

Light-weight system monitor for X, Wayland, and other things, too

Control Sonoff Devices with eWeLink (original) firmware over LAN and/or Cloud from Home Assistant

A standalone app for flashing, provisioning and controlling of ESPHome devices

TP-Link Easy Smart Switch port statistics

Network-wide ads & trackers blocking DNS server

This is a NUT windows client for monitoring your ups hooked up to your favorite linux server.

Remote voice satellite using Wyoming protocol

Integrates a Light sequencer and Show scheduler (xLights) as a Media Player in HomeAssistant

Integrates a Falcon Pi Player (FPP) as a Media Player in HomeAssistant

EPDiy is a driver board for affordable e-Paper (or E-ink) displays.

Project to provide functionality similar to ESPHome but for Zigbee instead of WiFi for nRF52

🎛 Desktop application (Windows / macOS / Linux) for Home Assistant built with Electron

Use Home Assistant Assist on the desktop. Compatible with Windows, MacOS, and Linux

Corefig for Windows Server

A complete web-based remote monitoring and management web site. Once setup you can install agents and perform remote desktop session to devices on the local network or over the Internet.

all-in-one audio board, works specially well with LogitechMediaServer

ESP32 Music streaming based on Squeezelite, with support for multi-room sync, AirPlay, Bluetooth, Hardware buttons, display and more

Linux distribution optimized for audio playback

My home-assistant.io config

A controller for addressable LED strings. It runs on Raspberry Pi hardware; LED strings are connected directly to GPIO pins. It is easy to use and customize through its built-in web server.

This Home Assistant integration provides a network scanner that identifies all devices on your local network. Utilizing the provided IP range and MAC address mappings, it gives each identified devi…

Hardware & Software documentation for the CircuitSetup Expandable 6 Channel ESP32 Energy Meter. Works with ESPHome and Home Assistant.

Multiple phase DIY energy consumption monitor using ESP32 and ESPHome

Home Assistant component for TP-Link router administration with sensors, button reboot, switches and device tracking.