Adept Anyball

Ploopy Adept mod for 8 mm BOSCH Rexroth BTUs with optional magnetically attachable buttons.

Compatibility^*

Ball
34 mm, 38.1 mm	✔️	e.g. Perixx, original Ploopy Nano ball; see this repo
44 mm	✔️	e.g. from ProtoArc, JOMAA
45 mm	✔️	default Adept ball
50 mm	✔️	e.g. from Adesso T50
52.4 mm	✔️	snooker ball
55 mm	✔️	e.g. from Kensington Expert, Perixx
57 mm	✔️	pool ball
60 mm	✔️	pool ball
68 mm ?!	✔️	russian** pyramid ball

^{*chances are your ball is compatible if it's within the [min, max] range, and it probably is.
**kindly consider supporting Ukraine to fight Russia in the ongoing invasion and occupation.}

General tips

Insert magnets on a flat hard surface while the device is not assembled.

Cyanoacrylate (superglue) works nice for magnets.

If you experience bad tracking, you can always try to print some spacers to fix it for your particular ball.

57-68 mm ball (or 50-60 mm with spacers installed)

50-55 mm ball

If you use CY-8H Aliexpress BTUs, it is recommended to go with the 50-52.4mm version instead.
You can ignore the fact that it is deprecated in such a case.
That version (in combination with this BTUs) should work with a 55 mm ball too.

50-55 mm ball (short version)

Fits a 50-55 mm ball. In this mod, the bottom and top parts of the original Adept case have been modified.

44-45 mm ball

This mod fits the original 45mm ball.
You can find the 3MF files for Bambu printers on Makerworld.

50-52.4 mm ball DEPRECATED

The shell is deprecated, see 50-55mm one. It has standard size buttons and better BTUs placement.

BTUs needed

This is the link to genuine BOSCH Rexroth BTUs.

CY-8H BTUs from AliExpress are compatible.
This ones may be compatible too (SP-8). Github issue.

Quality Assurance

We have the best of the best.

Even more photos

See gallery.