Visual programming language for sequencing MIDI signals using delay-based circuits.
| Block | Parameter | Example | Description |
|---|---|---|---|
| Play | Emits signal to all outputs on simulation start or after specified number of bars | ||
| skip-bars | 0 | number of bars to skip | |
| signature | 4/4 | signature of bars to skip | |
| Delay | Emits signal to all outputs after specified delay time after receiving signal at any of inputs | ||
| intervals | 1/2,1/4 | intervals to use for delay (used one after another, ie first signal is delayed for 1/2, next for 1/4 and so on) | |
| Clock | Emits signal to all outputs at specified intervals | ||
| ticking | true | true if clock is running, toggles to opposite every time clock receives signal at any of inputs | |
| skip-init | false | if this option is false clock sends initial signal to all outputs straight after simulation start | |
| intervals | 3/8,2/8,3/8 | intervals to use for delay (used one after another, ie first signal comes at start, next after 3/8, second after 2/8 and so on) | |
| Counter | Emits signal to all outputs after receiving specified number of input signals | ||
| steps | 4 | number of input signals to receive before sending signal to outputs | |
| one-shot | false | true if signals should be sent to outputs only once (per simulation) | |
| inverse | false | if true counter will emit output signal after every input signal except of every n-th where n = steps | |
| Switch | Emits signal to one output at a time clockwise straight after receiving signal at any of inputs | ||
| side | 1 | side of output port to send next output signal to (0 = up, 1 = right, 2 = down, 3 = left) | |
| And | Emits signal to all outputs when there are signals at all inputs at the same time | ||
| Or | Emits signal to all outputs after receiving signal at any of inputs (like Delay with 0 delay time) | ||
| MidiOut | Send midi message with specified parameters after receiving signal at any of inputs | ||
| cc-mode | true | true if midi out should send cc signals instead of note on | |
| channel | 1 | number of channel to send midi messages to | |
| notes | A3,C4,E4,A4 | list of notes/signals to send in midi note/cc messages (one at a time, one after another) | |
| velocities | 100,96,127 | list of velocities/values to send in midi note/cc messages | |
| durations | 1/16,1/16,1/4 | durations of midi notes |
| Action | How To |
|---|---|
| Place Block | Drag block from toolbar to viewport while holding [Left Mouse Button] |
| Connect Blocks with Wire | Draw wire between ports on sides of objects while holding [Left Mouse Button] |
| Select Object(s) | Click on object with [Left Mouse Button] or draw rectangular area around objects while holding it |
| Edit Object Properties | Select object, properties bar will appear |
| Copy | Select something, then press [Ctrl-C] |
| Paste | Click some empty place on viewport with [Left Mouse Button], then press [Ctrl-V] |
| Undo | Press [Ctrl-Z] |
| Redo | Press [Ctrl-Y] |
| Delete | Select something, then press [Delete] |
| Drag Selection | Select something, hover any block from selection, then hold [Left Mouse Button] and move mouse |
| Drag Viewport | Hold [Ctrl], hover some empty place on viewport, then hold [Left Mouse Button] and move mouse |