Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless-next-2.6 into for-davem

Documentation/DocBook/80211.tmpl

@@ -65,7 +65,6 @@
     </abstract>
   </setinfo>
   <book id="cfg80211-developers-guide">
-!Ainclude/net/cfg80211.h
     <bookinfo>
       <title>The cfg80211 subsystem</title>
 

MAINTAINERS

@@ -4304,13 +4304,12 @@ F:	Documentation/filesystems/dlmfs.txt
 F:	fs/ocfs2/
 
 ORINOCO DRIVER
-M:	Pavel Roskin <[email protected]>
-M:	David Gibson <[email protected]>
 L:	[email protected]
 L:	[email protected]
 L:	[email protected]
+W:	http://linuxwireless.org/en/users/Drivers/orinoco
 W:	http://www.nongnu.org/orinoco/
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/orinoco/
 
 OSD LIBRARY and FILESYSTEM
@@ -6376,7 +6375,7 @@ S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
 WL1251 WIRELESS DRIVER
-M:	Kalle Valo <[email protected]>
+M:	Kalle Valo <[email protected]>
 L:	[email protected]
 W:	http://wireless.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -6391,6 +6390,7 @@ W:	http://wireless.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
 F:	drivers/net/wireless/wl12xx/wl1271*
+F:	include/linux/spi/wl12xx.h
 
 WL3501 WIRELESS PCMCIA CARD DRIVER
 M:	Arnaldo Carvalho de Melo <[email protected]>

drivers/net/wireless/ath/ath.h

@@ -119,6 +119,7 @@ struct ath_common {
 
 	u32 keymax;
 	DECLARE_BITMAP(keymap, ATH_KEYMAX);
+	DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
 	u8 splitmic;
 
 	struct ath_regulatory regulatory;

drivers/net/wireless/ath/ath5k/base.c

@@ -700,10 +700,10 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	return 0;
 err_ah:
 	ath5k_hw_detach(sc->ah);
-err_irq:
-	free_irq(pdev->irq, sc);
 err_free_ah:
 	kfree(sc->ah);
+err_irq:
+	free_irq(pdev->irq, sc);
 err_free:
 	ieee80211_free_hw(hw);
 err_map:

drivers/net/wireless/ath/ath5k/debug.c

@@ -312,6 +312,7 @@ static const struct {
 	{ ATH5K_DEBUG_DUMP_TX,	"dumptx",	"print transmit skb content" },
 	{ ATH5K_DEBUG_DUMPBANDS, "dumpbands",	"dump bands" },
 	{ ATH5K_DEBUG_ANI,	"ani",		"adaptive noise immunity" },
+	{ ATH5K_DEBUG_DESC,	"desc",		"descriptor chains" },
 	{ ATH5K_DEBUG_ANY,	"all",		"show all debug levels" },
 };
 
@@ -955,7 +956,7 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah)
 	struct ath5k_rx_status rs = {};
 	int status;
 
-	if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET)))
+	if (likely(!(sc->debug.level & ATH5K_DEBUG_DESC)))
 		return;
 
 	printk(KERN_DEBUG "rxdp %x, rxlink %p\n",
@@ -997,7 +998,7 @@ ath5k_debug_printtxbuf(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	struct ath5k_tx_status ts = {};
 	int done;
 
-	if (likely(!(sc->debug.level & ATH5K_DEBUG_RESET)))
+	if (likely(!(sc->debug.level & ATH5K_DEBUG_DESC)))
 		return;
 
 	done = sc->ah->ah_proc_tx_desc(sc->ah, bf->desc, &ts);

drivers/net/wireless/ath/ath5k/debug.h

@@ -95,6 +95,7 @@ struct ath5k_dbg_info {
  * @ATH5K_DEBUG_DUMP_TX: print transmit skb content
  * @ATH5K_DEBUG_DUMPBANDS: dump bands
  * @ATH5K_DEBUG_TRACE: trace function calls
+ * @ATH5K_DEBUG_DESC: descriptor setup
  * @ATH5K_DEBUG_ANY: show at any debug level
  *
  * The debug level is used to control the amount and type of debugging output
@@ -117,6 +118,7 @@ enum ath5k_debug_level {
 	ATH5K_DEBUG_DUMP_TX	= 0x00000200,
 	ATH5K_DEBUG_DUMPBANDS	= 0x00000400,
 	ATH5K_DEBUG_ANI		= 0x00002000,
+	ATH5K_DEBUG_DESC	= 0x00004000,
 	ATH5K_DEBUG_ANY		= 0xffffffff
 };
 

drivers/net/wireless/ath/ath5k/pcu.c

@@ -137,11 +137,11 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
  * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
  *
  * @ah: The &struct ath5k_hw
- * @high: Flag to determine if we want to use high transmition rate
+ * @high: Flag to determine if we want to use high transmission rate
  * for ACKs or not
  *
  * If high flag is set, we tell hw to use a set of control rates based on
- * the current transmition rate (check out control_rates array inside reset.c).
+ * the current transmission rate (check out control_rates array inside reset.c).
  * If not hw just uses the lowest rate available for the current modulation
  * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
  */

drivers/net/wireless/ath/ath5k/phy.c

@@ -1582,7 +1582,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
 			else if (curr_sym_off >= 31 && curr_sym_off <= 46)
 				mag_mask[2] |=
 					plt_mag_map << (curr_sym_off - 31) * 2;
-			else if (curr_sym_off >= 46 && curr_sym_off <= 53)
+			else if (curr_sym_off >= 47 && curr_sym_off <= 53)
 				mag_mask[3] |=
 					plt_mag_map << (curr_sym_off - 47) * 2;
 
@@ -2987,7 +2987,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
 
 
 /*
- * Set transmition power
+ * Set transmission power
  */
 int
 ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,

drivers/net/wireless/ath/ath5k/reset.c

@@ -326,7 +326,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
  * register). After this MAC and Baseband are
  * disabled and a full reset is needed to come
  * back. This way we save as much power as possible
- * without puting the card on full sleep.
+ * without putting the card on full sleep.
  */
 int ath5k_hw_on_hold(struct ath5k_hw *ah)
 {
@@ -344,7 +344,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
 	/*
 	 * Put chipset on warm reset...
 	 *
-	 * Note: puting PCI core on warm reset on PCI-E cards
+	 * Note: putting PCI core on warm reset on PCI-E cards
 	 * results card to hang and always return 0xffff... so
 	 * we ingore that flag for PCI-E cards. On PCI cards
 	 * this flag gets cleared after 64 PCI clocks.
@@ -400,7 +400,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 	/*
 	 * Put chipset on warm reset...
 	 *
-	 * Note: puting PCI core on warm reset on PCI-E cards
+	 * Note: putting PCI core on warm reset on PCI-E cards
 	 * results card to hang and always return 0xffff... so
 	 * we ingore that flag for PCI-E cards. On PCI cards
 	 * this flag gets cleared after 64 PCI clocks.

drivers/net/wireless/ath/ath9k/common.c

@@ -372,9 +372,13 @@ int ath9k_cmn_key_config(struct ath_common *common,
 	set_bit(idx, common->keymap);
 	if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
 		set_bit(idx + 64, common->keymap);
+		set_bit(idx, common->tkip_keymap);
+		set_bit(idx + 64, common->tkip_keymap);
 		if (common->splitmic) {
 			set_bit(idx + 32, common->keymap);
 			set_bit(idx + 64 + 32, common->keymap);
+			set_bit(idx + 32, common->tkip_keymap);
+			set_bit(idx + 64 + 32, common->tkip_keymap);
 		}
 	}
 
@@ -399,10 +403,17 @@ void ath9k_cmn_key_delete(struct ath_common *common,
 		return;
 
 	clear_bit(key->hw_key_idx + 64, common->keymap);
+
+	clear_bit(key->hw_key_idx, common->tkip_keymap);
+	clear_bit(key->hw_key_idx + 64, common->tkip_keymap);
+
 	if (common->splitmic) {
 		ath9k_hw_keyreset(ah, key->hw_key_idx + 32);
 		clear_bit(key->hw_key_idx + 32, common->keymap);
 		clear_bit(key->hw_key_idx + 64 + 32, common->keymap);
+
+		clear_bit(key->hw_key_idx + 32, common->tkip_keymap);
+		clear_bit(key->hw_key_idx + 64 + 32, common->tkip_keymap);
 	}
 }
 EXPORT_SYMBOL(ath9k_cmn_key_delete);

drivers/net/wireless/ath/ath9k/htc_drv_main.c

@@ -1239,7 +1239,6 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 
 	/* Cancel all the running timers/work .. */
 	cancel_work_sync(&priv->ps_work);
-	cancel_delayed_work_sync(&priv->ath9k_ani_work);
 	cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
 	ath9k_led_stop_brightness(priv);
 
@@ -1787,7 +1786,8 @@ static void ath9k_htc_sw_scan_start(struct ieee80211_hw *hw)
 	priv->op_flags |= OP_SCANNING;
 	spin_unlock_bh(&priv->beacon_lock);
 	cancel_work_sync(&priv->ps_work);
-	cancel_delayed_work_sync(&priv->ath9k_ani_work);
+	if (priv->op_flags & OP_ASSOCIATED)
+		cancel_delayed_work_sync(&priv->ath9k_ani_work);
 	mutex_unlock(&priv->mutex);
 }
 
@@ -1801,9 +1801,10 @@ static void ath9k_htc_sw_scan_complete(struct ieee80211_hw *hw)
 	priv->op_flags &= ~OP_SCANNING;
 	spin_unlock_bh(&priv->beacon_lock);
 	priv->op_flags |= OP_FULL_RESET;
-	if (priv->op_flags & OP_ASSOCIATED)
+	if (priv->op_flags & OP_ASSOCIATED) {
 		ath9k_htc_beacon_config(priv, priv->vif);
-	ath_start_ani(priv);
+		ath_start_ani(priv);
+	}
 	ath9k_htc_ps_restore(priv);
 	mutex_unlock(&priv->mutex);
 }

drivers/net/wireless/ath/ath9k/init.c

@@ -33,7 +33,7 @@ int modparam_nohwcrypt;
 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
 
-int led_blink = 1;
+int led_blink;
 module_param_named(blink, led_blink, int, 0444);
 MODULE_PARM_DESC(blink, "Enable LED blink on activity");
 

drivers/net/wireless/ath/ath9k/mac.c

@@ -711,7 +711,8 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
 			rs->rs_phyerr = phyerr;
 		} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
 			rs->rs_status |= ATH9K_RXERR_DECRYPT;
-		else if (ads.ds_rxstatus8 & AR_MichaelErr)
+		else if ((ads.ds_rxstatus8 & AR_MichaelErr) &&
+		         rs->rs_keyix != ATH9K_RXKEYIX_INVALID)
 			rs->rs_status |= ATH9K_RXERR_MIC;
 	}
 

drivers/net/wireless/ath/ath9k/recv.c

@@ -870,15 +870,18 @@ static bool ath9k_rx_accept(struct ath_common *common,
 		if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
 			*decrypt_error = true;
 		} else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
-			if (ieee80211_is_ctl(fc))
-				/*
-				 * Sometimes, we get invalid
-				 * MIC failures on valid control frames.
-				 * Remove these mic errors.
-				 */
-				rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
-			else
+			/*
+			 * The MIC error bit is only valid if the frame
+			 * is not a control frame or fragment, and it was
+			 * decrypted using a valid TKIP key.
+			 */
+			if (!ieee80211_is_ctl(fc) &&
+			    !ieee80211_has_morefrags(fc) &&
+			    !(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
+			    test_bit(rx_stats->rs_keyix, common->tkip_keymap))
 				rxs->flag |= RX_FLAG_MMIC_ERROR;
+			else
+				rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
 		}
 		/*
 		 * Reject error frames with the exception of

drivers/net/wireless/b43/phy_n.c

@@ -3092,6 +3092,8 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
 	struct b43_phy_n *nphy = phy->n;
 	u16 buf[16];
 
+	nphy->phyrxchain = mask;
+
 	if (0 /* FIXME clk */)
 		return;
 
@@ -3103,7 +3105,7 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
 	b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXEN,
 			(mask & 0x3) << B43_NPHY_RFSEQCA_RXEN_SHIFT);
 
-	if (mask & 0x3 != 0x3) {
+	if ((mask & 0x3) != 0x3) {
 		b43_phy_write(dev, B43_NPHY_HPANT_SWTHRES, 1);
 		if (dev->phy.rev >= 3) {
 			/* TODO */

drivers/net/wireless/iwlwifi/iwl-1000.c

@@ -130,7 +130,7 @@ static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
 			sizeof(struct iwlagn_scd_bc_tbl);
 	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 	priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
-	priv->hw_params.bcast_sta_id = IWLAGN_BROADCAST_ID;
+	priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
 
 	priv->hw_params.max_data_size = IWLAGN_RTC_DATA_SIZE;
 	priv->hw_params.max_inst_size = IWLAGN_RTC_INST_SIZE;
@@ -217,7 +217,7 @@ static struct iwl_lib_ops iwl1000_lib = {
 		.set_ct_kill = iwl1000_set_ct_threshold,
 	 },
 	.manage_ibss_station = iwlagn_manage_ibss_station,
-	.update_bcast_station = iwl_update_bcast_station,
+	.update_bcast_stations = iwl_update_bcast_stations,
 	.debugfs_ops = {
 		.rx_stats_read = iwl_ucode_rx_stats_read,
 		.tx_stats_read = iwl_ucode_tx_stats_read,

drivers/net/wireless/iwlwifi/iwl-3945-hw.h

@@ -62,7 +62,7 @@
  *****************************************************************************/
 /*
  * Please use this file (iwl-3945-hw.h) only for hardware-related definitions.
- * Please use iwl-3945-commands.h for uCode API definitions.
+ * Please use iwl-commands.h for uCode API definitions.
  * Please use iwl-3945.h for driver implementation definitions.
  */
 
@@ -226,6 +226,7 @@ struct iwl3945_eeprom {
 
 /* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */
 #define IWL39_NUM_QUEUES        5
+#define IWL39_CMD_QUEUE_NUM	4
 
 #define IWL_DEFAULT_TX_RETRY  15
 

drivers/net/wireless/iwlwifi/iwl-3945-rs.c

@@ -343,7 +343,7 @@ void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 s
 	int i;
 
 	IWL_DEBUG_INFO(priv, "enter\n");
-	if (sta_id == priv->hw_params.bcast_sta_id)
+	if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id)
 		goto out;
 
 	psta = (struct iwl3945_sta_priv *) sta->drv_priv;
@@ -932,7 +932,7 @@ void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
 
 	rcu_read_lock();
 
-	sta = ieee80211_find_sta(priv->vif,
+	sta = ieee80211_find_sta(priv->contexts[IWL_RXON_CTX_BSS].vif,
 				 priv->stations[sta_id].sta.sta.addr);
 	if (!sta) {
 		IWL_DEBUG_RATE(priv, "Unable to find station to initialize rate scaling.\n");
@@ -949,7 +949,8 @@ void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
 	switch (priv->band) {
 	case IEEE80211_BAND_2GHZ:
 		/* TODO: this always does G, not a regression */
-		if (priv->active_rxon.flags & RXON_FLG_TGG_PROTECT_MSK) {
+		if (priv->contexts[IWL_RXON_CTX_BSS].active.flags &
+						RXON_FLG_TGG_PROTECT_MSK) {
 			rs_sta->tgg = 1;
 			rs_sta->expected_tpt = iwl3945_expected_tpt_g_prot;
 		} else