Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/jejb/scsi-misc-2.6

SCSI updates from James Bottomley:
 "The update includes the usual assortment of driver updates (lpfc,
  qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge
  amount of infrastructure work in the SAS library and transport class
  as well as an iSCSI update.  There's also a new SCSI based virtio
  driver."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits)
  [SCSI] qla4xxx: Update driver version to 5.02.00-k15
  [SCSI] qla4xxx: trivial cleanup
  [SCSI] qla4xxx: Fix sparse warning
  [SCSI] qla4xxx: Add support for multiple session per host.
  [SCSI] qla4xxx: Export CHAP index as sysfs attribute
  [SCSI] scsi_transport: Export CHAP index as sysfs attribute
  [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry
  [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry
  [SCSI] pm8001: fix endian issue with code optimization.
  [SCSI] pm8001: Fix possible racing condition.
  [SCSI] pm8001: Fix bogus interrupt state flag issue.
  [SCSI] ipr: update PCI ID definitions for new adapters
  [SCSI] qla2xxx: handle default case in qla2x00_request_firmware()
  [SCSI] isci: improvements in driver unloading routine
  [SCSI] isci: improve phy event warnings
  [SCSI] isci: debug, provide state-enum-to-string conversions
  [SCSI] scsi_transport_sas: 'enable' phys on reset
  [SCSI] libsas: don't recover end devices attached to disabled phys
  [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata
  [SCSI] libsas: set attached device type and target protocols for local phys
  ...

Documentation/scsi/LICENSE.qla2xxx

@@ -1,48 +1,11 @@
 Copyright (c) 2003-2011 QLogic Corporation
-QLogic Linux/ESX Fibre Channel HBA Driver
+QLogic Linux FC-FCoE Driver
 
-This program includes a device driver for Linux 2.6/ESX that may be
-distributed with QLogic hardware specific firmware binary file.
+This program includes a device driver for Linux 3.x.
 You may modify and redistribute the device driver code under the
 GNU General Public License (a copy of which is attached hereto as
 Exhibit A) published by the Free Software Foundation (version 2).
 
-You may redistribute the hardware specific firmware binary file
-under the following terms:
-
-	1. Redistribution of source code (only if applicable),
-	   must retain the above copyright notice, this list of
-	   conditions and the following disclaimer.
-
-	2. Redistribution in binary form must reproduce the above
-	   copyright notice, this list of conditions and the
-	   following disclaimer in the documentation and/or other
-	   materials provided with the distribution.
-
-	3. The name of QLogic Corporation may not be used to
-	   endorse or promote products derived from this software
-	   without specific prior written permission
-
-REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
-THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
-EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
-CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
-OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
-TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
-ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
-COMBINATION WITH THIS PROGRAM.
 
 
 EXHIBIT A

Documentation/scsi/bfa.txt

@@ -0,0 +1,82 @@
+Linux driver for Brocade FC/FCOE adapters
+
+
+Supported Hardware
+------------------
+
+bfa 3.0.2.2 driver supports all Brocade FC/FCOE adapters. Below is a list of
+adapter models with corresponding PCIIDs.
+
+	PCIID		  	Model
+
+	1657:0013:1657:0014	425 4Gbps dual port FC HBA
+	1657:0013:1657:0014	825 8Gbps PCIe dual port FC HBA
+	1657:0013:103c:1742	HP 82B 8Gbps PCIedual port FC HBA
+	1657:0013:103c:1744	HP 42B 4Gbps dual port FC HBA
+	1657:0017:1657:0014	415 4Gbps single port FC HBA
+	1657:0017:1657:0014	815 8Gbps single port FC HBA
+	1657:0017:103c:1741	HP 41B 4Gbps single port FC HBA
+	1657:0017:103c 1743	HP 81B 8Gbps single port FC HBA
+	1657:0021:103c:1779	804 8Gbps FC HBA for HP Bladesystem c-class
+
+	1657:0014:1657:0014	1010 10Gbps single port CNA - FCOE
+	1657:0014:1657:0014	1020 10Gbps dual port CNA - FCOE
+	1657:0014:1657:0014	1007 10Gbps dual port CNA - FCOE
+	1657:0014:1657:0014	1741 10Gbps dual port CNA - FCOE
+
+	1657:0022:1657:0024	1860 16Gbps FC HBA
+	1657:0022:1657:0022	1860 10Gbps CNA - FCOE
+
+
+Firmware download
+-----------------
+
+The latest Firmware package for 3.0.2.2 bfa driver can be found at:
+
+http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
+
+and then click following respective util package link:
+
+	Version			Link
+
+	v3.0.0.0	Linux Adapter Firmware package for RHEL 6.2, SLES 11SP2
+
+
+Configuration & Management utility download
+-------------------------------------------
+
+The latest driver configuration & management utility for 3.0.2.2 bfa driver can
+be found at:
+
+http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
+
+and then click following respective util pacakge link
+
+	Version			Link
+
+	v3.0.2.0	Linux Adapter Firmware package for RHEL 6.2, SLES 11SP2
+
+
+Documentation
+-------------
+
+The latest Administration's Guide, Installation and Reference Manual,
+Troubleshooting Guide, and Release Notes for the corresponding out-of-box
+driver can be found at:
+
+http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page
+
+and use the following inbox and out-of-box driver version mapping to find
+the corresponding documentation:
+
+	Inbox Version		Out-of-box Version
+
+	v3.0.2.2		v3.0.0.0
+
+
+Support
+-------
+
+For general product and support info, go to the Brocade website at:
+
+http://www.brocade.com/services-support/index.page

Documentation/scsi/libsas.txt

@@ -398,21 +398,6 @@ struct sas_task {
 	task_done -- callback when the task has finished execution
 };
 
-When an external entity, entity other than the LLDD or the
-SAS Layer, wants to work with a struct domain_device, it
-_must_ call kobject_get() when getting a handle on the
-device and kobject_put() when it is done with the device.
-
-This does two things:
-     A) implements proper kfree() for the device;
-     B) increments/decrements the kref for all players:
-     domain_device
-	all domain_device's ... (if past an expander)
-	    port
-		host adapter
-		     pci device
-			 and up the ladder, etc.
-
 DISCOVERY
 ---------
 

drivers/ata/libata-core.c

@@ -5936,29 +5936,31 @@ void ata_host_init(struct ata_host *host, struct device *dev,
 	host->ops = ops;
 }
 
-int ata_port_probe(struct ata_port *ap)
+void __ata_port_probe(struct ata_port *ap)
 {
-	int rc = 0;
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	unsigned long flags;
 
-	/* probe */
-	if (ap->ops->error_handler) {
-		struct ata_eh_info *ehi = &ap->link.eh_info;
-		unsigned long flags;
+	/* kick EH for boot probing */
+	spin_lock_irqsave(ap->lock, flags);
 
-		/* kick EH for boot probing */
-		spin_lock_irqsave(ap->lock, flags);
+	ehi->probe_mask |= ATA_ALL_DEVICES;
+	ehi->action |= ATA_EH_RESET;
+	ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
 
-		ehi->probe_mask |= ATA_ALL_DEVICES;
-		ehi->action |= ATA_EH_RESET;
-		ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
+	ap->pflags &= ~ATA_PFLAG_INITIALIZING;
+	ap->pflags |= ATA_PFLAG_LOADING;
+	ata_port_schedule_eh(ap);
 
-		ap->pflags &= ~ATA_PFLAG_INITIALIZING;
-		ap->pflags |= ATA_PFLAG_LOADING;
-		ata_port_schedule_eh(ap);
+	spin_unlock_irqrestore(ap->lock, flags);
+}
 
-		spin_unlock_irqrestore(ap->lock, flags);
+int ata_port_probe(struct ata_port *ap)
+{
+	int rc = 0;
 
-		/* wait for EH to finish */
+	if (ap->ops->error_handler) {
+		__ata_port_probe(ap);
 		ata_port_wait_eh(ap);
 	} else {
 		DPRINTK("ata%u: bus probe begin\n", ap->print_id);

drivers/ata/libata-eh.c

@@ -863,6 +863,7 @@ void ata_port_wait_eh(struct ata_port *ap)
 		goto retry;
 	}
 }
+EXPORT_SYMBOL_GPL(ata_port_wait_eh);
 
 static int ata_eh_nr_in_flight(struct ata_port *ap)
 {

drivers/ata/libata-scsi.c

@@ -3838,6 +3838,19 @@ void ata_sas_port_stop(struct ata_port *ap)
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_stop);
 
+int ata_sas_async_port_init(struct ata_port *ap)
+{
+	int rc = ap->ops->port_start(ap);
+
+	if (!rc) {
+		ap->print_id = ata_print_id++;
+		__ata_port_probe(ap);
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_sas_async_port_init);
+
 /**
  *	ata_sas_port_init - Initialize a SATA device
  *	@ap: SATA port to initialize

drivers/ata/libata.h

@@ -105,6 +105,7 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern struct ata_port *ata_port_alloc(struct ata_host *host);
 extern const char *sata_spd_string(unsigned int spd);
 extern int ata_port_probe(struct ata_port *ap);
+extern void __ata_port_probe(struct ata_port *ap);
 
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
@@ -151,7 +152,6 @@ extern void ata_eh_acquire(struct ata_port *ap);
 extern void ata_eh_release(struct ata_port *ap);
 extern enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
 extern void ata_scsi_error(struct Scsi_Host *host);
-extern void ata_port_wait_eh(struct ata_port *ap);
 extern void ata_eh_fastdrain_timerfn(unsigned long arg);
 extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
 extern void ata_dev_disable(struct ata_device *dev);

drivers/scsi/Kconfig

@@ -1903,6 +1903,14 @@ config SCSI_BFA_FC
 	  To compile this driver as a module, choose M here. The module will
 	  be called bfa.
 
+config SCSI_VIRTIO
+	tristate "virtio-scsi support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && VIRTIO
+	help
+          This is the virtual HBA driver for virtio.  If the kernel will
+          be used in a virtual machine, say Y or M.
+
+
 endif # SCSI_LOWLEVEL
 
 source "drivers/scsi/pcmcia/Kconfig"

drivers/scsi/Makefile

@@ -141,6 +141,7 @@ obj-$(CONFIG_SCSI_CXGB4_ISCSI)	+= libiscsi.o libiscsi_tcp.o cxgbi/
 obj-$(CONFIG_SCSI_BNX2_ISCSI)	+= libiscsi.o bnx2i/
 obj-$(CONFIG_BE2ISCSI)		+= libiscsi.o be2iscsi/
 obj-$(CONFIG_SCSI_PMCRAID)	+= pmcraid.o
+obj-$(CONFIG_SCSI_VIRTIO)	+= virtio_scsi.o
 obj-$(CONFIG_VMWARE_PVSCSI)	+= vmw_pvscsi.o
 obj-$(CONFIG_HYPERV_STORAGE)	+= hv_storvsc.o
 

drivers/scsi/aacraid/aachba.c

@@ -151,7 +151,11 @@ int aac_msi;
 int aac_commit = -1;
 int startup_timeout = 180;
 int aif_timeout = 120;
+int aac_sync_mode;  /* Only Sync. transfer - disabled */
 
+module_param(aac_sync_mode, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(aac_sync_mode, "Force sync. transfer mode"
+	" 0=off, 1=on");
 module_param(nondasd, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices."
 	" 0=off, 1=on");

drivers/scsi/aacraid/aacraid.h

@@ -12,7 +12,7 @@
  *----------------------------------------------------------------------------*/
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 28000
+# define AAC_DRIVER_BUILD 28900
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
@@ -756,8 +756,16 @@ struct src_mu_registers {
 
 struct src_registers {
 	struct src_mu_registers MUnit;	/* 00h - c7h */
-	__le32 reserved1[130790];	/* c8h - 7fc5fh */
-	struct src_inbound IndexRegs;	/* 7fc60h */
+	union {
+		struct {
+			__le32 reserved1[130790];	/* c8h - 7fc5fh */
+			struct src_inbound IndexRegs;	/* 7fc60h */
+		} tupelo;
+		struct {
+			__le32 reserved1[974];		/* c8h - fffh */
+			struct src_inbound IndexRegs;	/* 1000h */
+		} denali;
+	} u;
 };
 
 #define src_readb(AEP, CSR)		readb(&((AEP)->regs.src.bar0->CSR))
@@ -999,6 +1007,10 @@ struct aac_bus_info_response {
 #define AAC_OPT_NEW_COMM		cpu_to_le32(1<<17)
 #define AAC_OPT_NEW_COMM_64		cpu_to_le32(1<<18)
 #define AAC_OPT_NEW_COMM_TYPE1		cpu_to_le32(1<<28)
+#define AAC_OPT_NEW_COMM_TYPE2		cpu_to_le32(1<<29)
+#define AAC_OPT_NEW_COMM_TYPE3		cpu_to_le32(1<<30)
+#define AAC_OPT_NEW_COMM_TYPE4		cpu_to_le32(1<<31)
+
 
 struct aac_dev
 {
@@ -1076,6 +1088,8 @@ struct aac_dev
 #	define AAC_MIN_FOOTPRINT_SIZE 8192
 #	define AAC_MIN_SRC_BAR0_SIZE 0x400000
 #	define AAC_MIN_SRC_BAR1_SIZE 0x800
+#	define AAC_MIN_SRCV_BAR0_SIZE 0x100000
+#	define AAC_MIN_SRCV_BAR1_SIZE 0x400
 #endif
 	union
 	{
@@ -1116,7 +1130,10 @@ struct aac_dev
 	u8			msi;
 	int			management_fib_count;
 	spinlock_t		manage_lock;
-
+	spinlock_t		sync_lock;
+	int			sync_mode;
+	struct fib		*sync_fib;
+	struct list_head	sync_fib_list;
 };
 
 #define aac_adapter_interrupt(dev) \
@@ -1163,6 +1180,7 @@ struct aac_dev
 
 #define FIB_CONTEXT_FLAG_TIMED_OUT		(0x00000001)
 #define FIB_CONTEXT_FLAG			(0x00000002)
+#define FIB_CONTEXT_FLAG_WAIT			(0x00000004)
 
 /*
  *	Define the command values
@@ -1970,6 +1988,7 @@ int aac_rkt_init(struct aac_dev *dev);
 int aac_nark_init(struct aac_dev *dev);
 int aac_sa_init(struct aac_dev *dev);
 int aac_src_init(struct aac_dev *dev);
+int aac_srcv_init(struct aac_dev *dev);
 int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
 unsigned int aac_response_normal(struct aac_queue * q);
 unsigned int aac_command_normal(struct aac_queue * q);