ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'

Commit 9e3c006 (ARM: dts: imx6q-arm2: add pinctrl for uart and enet) defines NANDF_CS pins as gpio in 'hog', assuming these two pins are always used by usdhc3 in gpio mode as card-detection and write-protection on ARM2 board. But it's not true. These pins are shared by usdhc3 and gpmi-nand. We should have the pins functional for gpmi-nand when usdhc3 is disabled. Move the pins out of 'hog', so that pins only work in gpio mode as CD and WP when usdhc3 is enabled, and otherwise they are available for gpmi-nand. Reported-by: Huang Shijie <[email protected]> Signed-off-by: Shawn Guo <[email protected]> Tested-by: Huang Shijie <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
baoh · Oct 16, 2012 · 3d76f9f · 3d76f9f
1 parent 5448a27
commit 3d76f9f
Showing 1 changed file with 9 additions and 1 deletion.
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -37,6 +37,13 @@
 					pinctrl_hog: hoggrp {
 						fsl,pins = <
 							176  0x80000000	/* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+						>;
+					};
+				};
+
+				arm2 {
+					pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+						fsl,pins = <
 							1363 0x80000000	/* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
 							1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
 						>;
@@ -58,7 +65,8 @@
 				wp-gpios = <&gpio6 14 0>;
 				vmmc-supply = <&reg_3p3v>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1>;
+				pinctrl-0 = <&pinctrl_usdhc3_1
+					     &pinctrl_usdhc3_arm2>;
 				status = "okay";
 			};