05-07-2024 final working with macOS-Sonoma

to update to current c4pt/fedora-mac KVM loader with Sonoma changes

docker pull c4pt/fedora-mac

to install Sonoma

sh install-docker-and-sonoma.sh
ssh -X -p 2022 -Y -X 172.17.0.1
password is "fedora-mac"

to resume Sonoma after shutdown or reboot or exiting the docker image

sh docker-run.sh
ssh -X -p 2022 -Y -X 172.17.0.1
password is "fedora-mac"

05-05-2024

• iso from -> https://klabsdev.com/definitive-guide-to-running-macos-in-proxmox/

FULL Sonoma ISO download (recovery dmg from fetch-macos.py doesnt seem to load)

https://cdn.klabsdev.com/MacImages/macOS-Sonoma-14.1.1.iso

about Sonoma / Ventura ..... has to be Haswell-noTSX instead Penryn of APFS when installing using disk utility or cryptex apfs hashing functions will fail even on avx2.0 processors even with CryptexFixup.kext

USE APFS as a filesystem it works in KVM-docker Sonoma when using HFS+ the system seems to revert it back into APFS

<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>


<qemu:commandline>
    <qemu:arg value="-device"/>
    <qemu:arg value="isa-applesmc,osk=ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"/>
    <qemu:arg value="-smbios"/>
    <qemu:arg value="type=2"/>
    <qemu:arg value="-global"/>
    <qemu:arg value="ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off"/>
    <qemu:arg value="-cpu"/>
    <qemu:arg value="Haswell-noTSX,vendor=GenuineIntel,kvm=on,+sse3,+sse4.2,+aes,+xsave,+avx,+xsaveopt,+avx2,+bmi2,+smep,+bmi1,+fma,+movbe,+invtsc,+vmx,enforce,vmware-cpuid-freq=on"/>
  </qemu:commandline>


in terminal to check your cpu flags and functions
lscpu | grep avx

https://github.com/acidanthera/CryptexFixup

or it leads to failures with libSystem.B.dylib with post installation right before the new user wizard startup screen to make a new user account on a fresh install

on a reboot loop

disable root_hash_validation once the system is APFS in config.plist of /EFI/OC

				<key>Patch</key>
			        <array>

				<dict>
				<key>Arch</key>
				<string>x86_64</string>
				<key>Base</key>
				<string>_isSingleUse
				-------------this goes into bottom of Patch key----.......................................

				<dict>
				<key>Arch</key>
				<string>x86_64</string>
				<key>Base</key>
				<string>_authenticate_root_hash</string>
				<key>Comment</key>
				<string>Disable Root Hash validation</string>
				<key>Count</key>
				<integer>0</integer>
				<key>Enabled</key>
				<true/>
				<key>Find</key>
				<data></data>
				<key>Identifier</key>
				<string>com.apple.filesystems.apfs</string>
				<key>Limit</key>
				<integer>0</integer>
				<key>Mask</key>
				<data></data>
				<key>MaxKernel</key>
				<string></string>
				<key>MinKernel</key>
				<string>22.0.0</string>
				<key>Replace</key>
				<data>uAAAAADD</data>
				<key>ReplaceMask</key>
				<data></data>
				<key>Skip</key>
				<integer>0</integer>
			</dict>

04-23-2024 Monterey,Ventura,Sonoma is working use "vmxnet3" with KVM for networking adapter type graphics should be vmware-svga or vmware

after post install my dynamic wallpapers didnt work only solid colors with "change desktop background"

I had to manually download a wallpaper and set it as my desktop background and it seemed to load instead of a blank white screen

05-07-2024 fixing KVM network

updates 12-09-2023 Sonoma will not install see ventura install here

• requires dmg2img yum install dmg2img -y

• update to fix networking inside of SSH KVM once you login to ssh [email protected] using fedora-mac password use this script in fedora-mac to fix iptables

• https://raw.githubusercontent.com/c4pt000/kernel-5.11.6-expSEHDsec-HAXM-cgroup-virtio-nvidia-amd-kaliwifi/master/patch-libvirt-IPTABLES-NFTABLES-UFW.sh

  wget https://raw.githubusercontent.com/c4pt000/kernel-5.11.6-expSEHDsec-HAXM-cgroup-virtio-nvidia-amd-kaliwifi/master/patch-libvirt-IPTABLES-NFTABLES-UFW.sh
  chmod +x patch-libvirt-IPTABLES-NFTABLES-UFW.sh
  
  
  
  ./patch-libvirt-IPTABLES-NFTABLES-UFW.sh
  close virt-manager and then reopen virtual manager from virt-manager
  change NIC to virtio see picture below
  networking should work for install
  
  once inside the Sonoma installer first step open a Terminal and use the following command to prevent sleep
  
  sudo pmset -a disablesleep 1
  
  

adjust Network interface card to 'vmxnet3' to install Sonoma

• now supporting Sonoma

for docker inside of a virtual machine running KVM natively notice the kvm=on,vmx extension for the processor requires kvm_intel nested=1 in /etc/kvm.conf and or

cat /etc/modprobe.d/kvm-nested.conf 
options kvm-intel nested=1
options kvm-intel enable_shadow_vmcs=1
options kvm-intel enable_apicv=1
options kvm-intel ept=1

<qemu:arg value='Penryn,vendor=GenuineIntel,kvm=on,vmx,rdtscp,+invtsc,+avx,+avx2,+aes,+xsave,+xsaveopt,+ssse3,+sse4_2,+popcnt,vmware-cpuid-freq=on,'/>

10-27-2021

updates for macOS monterey

"not regular hackintosh on a PC" " https://www.insanelymac.com/ "

for docker nested functions

• 07-09-2021 forgot to write down details from when i published this from being overtired

• requires docker (and kvm.conf and kvm enabled grub.conf) must have iommu=pt intel_iommu=on in /etc/default/grub on this line and vt-d i/o enabled in the bios

GRUB_CMDLINE_LINUX=iommu=pt intel_iommu=on ....x.x..x.x..x..x.x...x.x..x
GRUB_ENABLE_BLSCFG=false

followed by

grub2-mkconfig -o /boot/grub2/grub.cfg
grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg

standard stuff for KVM.conf (might require running ---> dracut -f )

cat /etc/modprobe.d/kvm.conf 
###
### This configuration file was provided by the qemu package.
### Feel free to update as needed.
###

###
### Set these options to enable nested virtualization
###

options kvm ignore_msrs=y
options kvm_intel nested=1
#options kvm_amd nested=1

options vfio_iommu_type1 allow_unsafe_interrupts=1

to install

as root

wget https://raw.githubusercontent.com/c4pt000/Docker-bigSur/master/install-docker-and-bigsur.sh
chmod install-docker-and-bigsur.sh
sh install-docker-and-bigsur.sh

SET A STRONG PASSWORD AND STORE IT TO PREVENT VNC/SPICE HIJACKING

the docker image mounts the two local hard drive images (nothing is really stored in the docker image except for the qemu-system-x86_64 unless the user adds something

the script creates two (blank) hard drive images locally
mac_hdd_ng.img (blank 250gb expanding volume)
BaseSystem.img (base installer for bigSur 8.5GB?)


if Docker-bigSur is erased with the two images you will lose the data off of the system

launch INSTALL_FIRST from virt-manager
then Disk Utility "Erase" 256GB volume
then reinstall bigSur

set a strong password and store it for root

to resume

as root

• from the Docker-bigSur directory directly to resume
• change mode with chmod +x if not already set to executable bit

chmod +x resume-docker-bigSur.sh
sh resume-docker-BigSur.sh
change password for root:

# passwd

the script in further detail:

as root:

• you should have something like this before connecting

┌─[root@fedora]─[/home/c4pt/opt/Docker-bigSur]
└──╼ #xhost 
access control enabled, only authorized clients can connect
SI:localuser:root
SI:localuser:c4pt

when running this as privileged with /sbin/init

system will hook PID 1

use (Crtl-Alt-F3) or (Crtl-Alt-F4) to open a different tty then back to (Crtl-Alt-F1) to release XDM login for fedora-mac

port 2022 has to be enabled as allow out in firewalld or ufw

the docker guest IP might not be 172.17.0.1 (sometimes it changes if other docker guests are using a virtual docker0 ip password to login with fedora-mac as root

ssh -p 2022 -Y [email protected]

from here down can be ignored original post notes

confusing detailed original instructions begin here from original post

firewall ports LAN side 22, 2022, 5900 (xhost + can be dangerous along with running ssh aside from --privileged and 5900)

https://github.com/c4pt000/Docker-fedora-34-nested-docker

https://github.com/c4pt000/kernel-5.11.6-expSEHDsec-HAXM-cgroup-virtio

standard stuff for KVM.conf

cat /etc/modprobe.d/kvm.conf 
###
### This configuration file was provided by the qemu package.
### Feel free to update as needed.
###

###
### Set these options to enable nested virtualization
###


options kvm ignore_msrs=y
options kvm_intel nested=1

#options kvm_amd nested=1

options vfio_iommu_type1 allow_unsafe_interrupts=1

standard stuff for mounting local volumes

where /opt is a directory and localdir is a sub dir to mount on the guest mounting physical folders use -v /opt/localdir:/opt/remotedir

requires docker qemu-img python3

• update working now (overtired didnt realize that the "OSX-KVM" submodule wasnt linked on this repo even though the folder was there)

https://github.com/c4pt000/Docker-OSX

git clone https://github.com/c4pt000/Docker-OSX

passwd for root :

fedora-mac

change with passwd 

Crtl+Alt+F for fullscreen

Crtl+Alt+F again to exit

requires port 2022 LAN side allow

step 1

docker-install-run.sh

echo "password:   fedora-mac"

"where 172.17.0.1 is the ip of this docker image if different connect to that ip"
"ssh -p 2022 -Y [email protected]"
"fedora-mac -> password for root"
"/usr/bin/mac-install"

for macos + hda ich9 sound support

mac-install-snd

once installed from step 1

docker-run.sh

echo "password:   fedora-mac"

"where 172.17.0.1 is the ip of this docker image if different connect to that ip"
"ssh -p 2022 -Y [email protected]"
"fedora-mac -> password for root"
"/usr/bin/macos"
or 
"/usr/bin/macos-snd"
ssh -p 2022 -Y 172.17.0.1

macos                 might take running the command two or three times to kick over

for macos + hda ich9 sound support

macos-snd

if docker: Error response from daemon: driver failed programming external connectivity on endpoint brave_wiles (ec8a48644655f0a51b73b0a8a7f5c4efd2f1d90afdc7eaa001f04f9638f38c41): Bind for 0.0.0.0:50922 failed: port is already allocated.

docker ps -a

to "docker stop <running_image>"

with port conflict

to install fresh image

docker-install-run.sh

docker exec -it <vm_machine_hash> bash

mac-install


to run image afterwards

docker-install-run.sh
docker exec -it <vm_machine_hash> bash

macos

for ssh to macOS guest

docker maps port 22 from macos when remote login is activated to 10022, docker exposes 10022 wrapped to port 50922 for the host side as per docker -p 50922:10022

connecting to macOS guest running within this docker where user is your username with "Remote login" activated

ssh -p 50922 [email protected]

or with X11_Forwarding enabled

ssh -p 50922 -Y [email protected]

sending/receiving files with ssh "scp"

pushing "Xcode.xip" to user's account at folder /Users/user/Desktop

scp -P 50922 -r Xcode_12.5.xip [email protected]:/Users/user/Desktop

pulling "Xcode.xip" from guest to host to current working directory
scp -P 50922 -r [email protected]:/Users/user/Downloads/Xcode_12.5.xip Xcode_12.5.xip

disabling "gatekeeper within macos"

sudo spctl --master-disable