Sunsynk-Power-Flow-Card-VE

Forked from https://github.com/slipx06/sunsynk-power-flow-card to toy around a bit learning some JS.

An animated Home Assistant card to emulate the power flow that's shown on the Sunsynk Inverter screen. You can use this for Deye as well as other Inverters as long as you have the required sensor data. See the WIKI for integration methods and examples.

Updates

• Added temperature unit (temp_unit), use either C or F. Default C
• For Victron systems, use dc_transformer_temp_90 variable to show Min SOC in %. Displayed as Integer value only.
• Replaced Sunsynk Inverter Status messages with Victron Inverter messages when using the use_victron inverter variable.
• Added connected state check to aux_connected variable. It now accepts off|on, 0|1 and disconnected|connected, all case insensitive.
• AUX Loads entities can now be clicked to show more-info dialog
• Move some objects and align a few values
• Raised selectable Battery Empty restriction from 30% to 80% for Lead-Acid batteries.
• Added (Incl. AUX) text to DAILY LOAD for clarity when AUX sensor is configured.
• Aux Load Icons change colour according to the AUX connected state.
• Added auto_scale feature as per source distribution.
• Added environment_temp feature as per source distribution.

Features

• Option to switch between two card styles: lite or full.
• Animated power flow based on positive/negative/zero sensor values with configurable dynamic speed. (Supports inverted battery, AUX and grid power).
• Dynamic battery image based on SOC (empty->low->medium->high).
• Grid connected status.
• Inverter status (standby, normal, self-test, alarm, fault).
• When using use_victron variable the following Inverter status messages are returned: (Off, Low Power, Fault, Bulk, Absorption, Float, Storage, Equalize, Passthru, Inverting, Power Assist, Power Supply, Ext. Control)
• Configurable battery size and shutdown SOC to calculate and display remaining battery runtime based on current battery usage and system time slot setting i.e. SOC, Grid Charge. Can be toggled off.
• Daily Totals that can be toggled on or off.
• Hide all solar data if not installed or specify number of mppts in use. Set custom MPPT labels.
• "Use Timer" setting and "Energy Pattern" setting (Priority Load or Priority Battery) shown as dynamic icons with ability to hide if not required. If setup as switches can be toggled by clicking on the card
• Panel mode for bigger card
• AUX and Non-essential can be hidden from the full card or assigned configurable labels
• Customisable - Change colours and images
• Most entities can be clicked to show more-info dialog
• Optional data points include self sufficiency and ratio percentages, battery temperature, AC and DC temperature
• Display up to two non-essential, essential and AUX loads
• Display energy cost per kWh and solar sell status

Screenshots

Lite Version

Full Version

Installation

The card can be installed manually or via HACS

Manual Installation

1. Create a new directory under www and name it sunsynk-power-flow-card-ve e.g www/sunsynk-power-flow-card-ve/
2. Copy the sunsynk-power-flow-card.js into the directory
3. Add the resource to your Dashboard. You can append the filename with a ?ver=x and increment x each time you download a new version to force a reload and avoid using a cached version. It is also a good idea to clear your browser cache.

Installation using HACS

You can add to HACS as a Custom Repo

Usage

Add the Custom: Sunsynk Power Flow Card VE to your Dashboard view.

Card Options

The card can be configured through the following attributes:

Attribute	Requirement	Default	Description
type:	Required	custom:sunsynk-power-flow-card-ve	The custom card
cardstyle:	Required	lite	Selects the card layout that is used lite or full
panel_mode:	Optional	no	Toggles panel mode removing any card height restrictions. For use with Panel(1 card) view types or grid layouts
large_font:	Optional	no	Increases font size of sensor data yes/no
show_solar:	Required	yes	Toggle display of solar information yes/no
card_height:	Optional	396px	Sets the card height in pixels 400px
inverter:	Optional	See optional Inverter attributes below	List of inverter attributes.
battery:	Required	See required Battery attributes below	List of battery attributes.
solar:	Optional	See optonal Solar attributes below	List of solar attributes.
load:	Optional	See optional Load attributes below	List of load attributes.
grid:	Optional	See optional Grid attributes below	List of grid attributes.
temp_unit:	Optional	C	Celsius(default) or Fahrenheit C or F
decimal_places:	Optional	2	Used with auto_scale. Number of decimal Default is 2. Values from 1 to 3
entities:	Required	See required Entities attributes below	List of sensor entities.

Inverter

Attribute	Requirement	Default	Description
modern:	Optional	yes	Changes the inverter image.
colour:	Optional	grey	Changes the colour of the inverter. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
autarky:	Optional	power	Display autarky and ratio as a percentage using either realtime power or daily energy values. Set to no to hide (energy/power/no). Autarky is the percentage of self sufficiency through Home Production. Ratio is the percentage of produced electricity used by the home. It is calculated based on the formula below and borrowed from the Power Distribution Card Autarky in Percent = Home Production / Home Consumption Ratio in Percent = Home Consumption / Home Production
use_victron:	Optional	false	Enables Victron-specific inverter status messages.
auto_scale:	Optional	false	Enables values to display in kW instead of W when above 999 W. Default false

Battery

Note: This card will always display battery power as a positive number regardless of your sensor value. The animated dot will change direction depending on the charging or discharging state. The invert_power attribute can be used to reverse direction if needed by your sensor.

Attribute	Requirement	Default	Description
energy:	Required	15960	Total Battery Energy in Wh (e.g. 3 x 5.32kWh = 15960). If set to hidden the remaining battery runtime will be hidden
shutdown_soc:	Required	20	The battery shutdown percentage used to calculate remaining runtime
invert_power:	Optional	no	Set to yes if your sensor provides a positive number for battery charge and negative number for battery discharge
colour:	Optional	pink	Changes the colour of all the battery card objects. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
warn_colour:	Optional	default battery colour	Changes the colour of the battery symbol when SOC drops to below Shutdown SOC. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
show_daily:	Optional	no	Toggles the Daily Total (yes/no)
animation_speed:	Optional	6	Set slowest animation speed in seconds, depending on Power draw
max_power:	Optional	4500	Maximun Power draw to calculate animation speed
full_capacity:	Optional	80	If SOC >= to this value the Fully Charged battery image will be shown. Accepts any value between 80-100
empty_capacity:	Optional	30	If SOC <= to this value the Empty battery image will be shown. Accepts any value between 1-80
tail_current:	Optional	2	Used with, or without, use_victron flag (Victron Inverters must also be in Absorbtion or Inverting mode). Set battery current, in A, that indicates when to indicate Float. Accepts any value from 1 to 20
auto_scale:	Optional	false	Enables values to display in kW instead of W when above 999 W. Default false

Solar

These attributes are only needed if show_solar is set to yes

Attribute	Requirement	Default	Description
colour:	Optional	orange	Changes the colour of all the solar card objects. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
show_daily:	Optional	no	Toggles the Daily Total (yes/no)
mppts:	Required	two	Specify the number of MPPT's in use one, two, three or four
animation_speed:	Optional	9	Set slowest animation speed in seconds, depending on Power produced
max_power:	Optional	8000	Maximun Power draw to calculate animation speed
pv1_name:	Optional	PV1	Set the disaply name for MPPT1
pv2_name:	Optional	PV2	Set the disaply name for MPPT2
pv3_name:	Optional	PV3	Set the disaply name for MPPT3
pv4_name:	Optional	PV4	Set the disaply name for MPPT4
auto_scale:	Optional	false	Enables values to display in kW instead of W when above 999 W. Default false

Load

Attribute	Requirement	Default	Description
colour:	Optional	'#5fb6ad'	Changes the colour of all the load card objects. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
show_daily:	Optional	no	Toggles the Daily Total yes/no
show_aux:	Optional	no	Toggles the display of Aux (yes/no)
invert_aux:	Optional	no	Set to yes if your sensor provides a positive number for AUX input and negative number for AUX output
animation_speed:	Optional	8	Set slowest animation speed in seconds, depending on Power draw
max_power:	Optional	8000	Maximun Power draw to calculate animation speed
aux_name:	Optional	Auxilary	Set the display name for the Auxilary Load
aux_type:	Optional	default	Changes the AUX image using preset or any mdi icon e.g. mdi:ev-station. Presets are: gen, inverter default, oven, pump, aircon and boiler.
aux_colour:	Optional	the load colour	Changes the colour of all the AUX card objects. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
aux_off_colour:	Optional	the load colour	Changes the colour of the AUX icon and label when disconnected. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
aux_loads:	Optional	no	Display additional loads on the AUX side (no/one/two)
aux_load1_name:	Optional		Set the display name for the AUX Load 1
aux_load2_name:	Optional		Set the display name for the AUX Load 2
aux_load1_icon:	Optional		Change the aux load 1 image using any mdi icon e.g. mdi:ev-station
aux_load2_icon:	Optional		Change the aux load 2 image using any mdi icon e.g. mdi:ev-station
additional_loads:	Optional	no	Display additional loads on the essential side (one/two/no)
load1_name:	Optional		Set the display name for the Essential Load 1
load2_name:	Optional		Set the display name for the Essential Load 2
load1_icon:	Optional	none	Change the essential load 1 image using preset or any mdi icon e.g. mdi:ev-station Presets are: boiler, pump, aircon, oven
load2_icon:	Optional	none	Change the essential load 2 image using preset or any mdi icon e.g. mdi:ev-station Presets are: boiler, pump, aircon, oven
auto_scale:	Optional	false	Enables values to display in kW instead of W when above 999 W. Default false

Grid

Attribute	Requirement	Default	Description
colour:	Optional	'#5490c2'	Changes the colour of all the grid card objects. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
no_grid_colour:	Optional	'#a40013'	Changes the colour of the grid disconnected icon. Hex codes ('#66ff00' etc) or names (red, green, blue etc)
show_daily_buy:	Optional	no	Toggles the Daily Buy Total (yes/no)
show_daily_sell:	Optional	no	Toggles the Daily Sell Total (yes/no)
show_nonessential:	Optional	yes	Toggles the display of Non-Essential (yes/no)
nonessential_icon:	Optional	default	Change the nonessential image using presets or any mdi icon e.g. mdi:ev-station. Presets are: default oven, boiler pump, aircon
nonessential_name:	Optional	Non Essential	Set the display name for the Non-Essential Load
additional_loads:	Optional	no	Toggle the display of additional loads on the non-essential side (one/two/no)
load1_name:	Optional		Set the display name for the Non-Essential Load 1
load2_name:	Optional		Set the display name for the Non-Essential Load 2
load1_icon:	Optional	default	Change the nonessential load 1 image using presets or any mdi icon e.g. mdi:ev-station. Presets are: default, oven, boiler, pump, aircon
load2_icon:	Optional	default	Change the nonessential load 2 image using presets or any mdi icon e.g. mdi:ev-station. Presets are: default, oven, boiler, pump, aircon
invert_grid:	Optional	no	Set to yes if your sensor provides a negative number for Grid import and positive number for Grid export
animation_speed:	Optional	8	Set slowest animation speed in seconds, depending on Power draw
max_power:	Optional	8000	Maximun Power draw to calculate animation speed
auto_scale:	Optional	false	Enables values to display in kW instead of W when above 999 W. Default false

Entities

Entity attributes below have been appended with the modbus register # e.g. pv2_power_187 to indicate which Sunsynk register should be read when configuring your sensors. Replace the default sensors with your own specific sensor names. It is important that your sensors read the expected modbus register value. If you have missing sensors for any attribute set it to none i.e. day_pv_energy_108: none. This will hide the sensor data from the card. To display a placeholder with a default value of 0 set it to zero or any other value i.e. solarday_108: zero.

See the WIKI for more information on sensor mappings if using other integration methods.

Attribute	Requirement	Default	Description
use_timer_248:	Optional	switch.sunsynk_toggle_system_timer	Displays "Use timer" status as an icon next to the inverter. Set to no to hide
priority_load_243:	Optional	switch.sunsynk_toggle_priority_load	Shows if energy pattern is set to Priority Load or Priority Battery as an icon next to the inverter. Set to no to hide
day_battery_discharge_71:	Optional	ssensor.sunsynk_day_battery_discharge	Daily Battery Usage (kWh)
day_battery_charge_70:	Optional	sensor.sunsynk_day_battery_charge	Daily Battery Charge (kWh)
day_load_energy_84:	Optional	sensor.sunsynk_day_load_energy	Daily Load (kWh)
day_grid_import_76:	Optional	sensor.sunsynk_day_grid_import	Daily Grid Import (kWh)
day_grid_export_77:	Optional	sensor.sunsynk_day_grid_export	Daily Grid Export (kWh)
day_pv_energy_108:	Optional	sensor.sunsynk_day_pv_energy	Daily Solar Usage (kWh
inverter_voltage_154:	Optional	sensor.sunsynk_inverter_voltage	Inverter Voltage (V)
load_frequency_192:	Optional	sensor.sunsynk_load_frequency	Load Frequency (Hz)
inverter_current_164:	Optional	sensor.sunsynk_inverter_current	Inverter Current (A)
inverter_power_175:	Optional	sensor.sunsynk_inverter_power	Inverter Power (W). Required if the essential_power attribute is set to none
grid_power_169:	Optional	sensor.sunsynk_grid_power	Grid Power (W) See NOTE below. Use 167 (Grid LD Power) if non-essential and essential readings are wrong. Required if the nonessential_power attribute is set to none
pv1_power_186:	Optional	sensor.sunsynk_pv1_power	PV String 1 Power (W)
pv2_power_187:	Optional	sensor.sunsynk_pv2_power	PV String 2 Power (W)
pv3_power_188:	Optional	sensor.sunsynk_pv3_power	PV String 3 Power (W)
pv4_power_189:	Optional	sensor.sunsynk_pv4_power	PV String 4 Power (W)
pv_total:	Optional	none	Provide a sensor for total pv power. If omitted the card uses internal logic to calculate this based on the pv1-4 power (W)
battery_voltage_183:	Optional	sensor.sunsynk_battery_voltage	Battery Voltage (V)
battery_soc_184:	Required	sensor.sunsynk_battery_soc	Battery State of Charge (%)
battery_power_190:	Required	sensor.sunsynk_battery_power	Battery Power (W). Requires a negative number for battery charging and a positive number for battery discharging. Set the invert_power: battery attribute to yes if your sensor reports this the other way around
battery_current_191:	Required	sensor.sunsynk_battery_current	Battery Current (A)
essential_power:	Optional	none	The card will automatically calculate this sensor based on the formula below if the attribute is set to none. You can overide this by supplying a sensor that measures essential power e.g. Load power Essential in the case of Solar Assistant. (W)
essential_load1:	Optional		Sensor that contains the power of your essential load 1 (W)
essential_load2:	Optional		Sensor that contains the power of your essential load 2 (W)
nonessential_power	Optional	none	The card will automatically calculate this sensor based on the formula below if the attribute is set to none. You can overide this by supplying a sensor that measures non-essential power e.g. Load power Non-Essential in the case of Solar Assistant. (W)
non_essential_load1:	Optional		Sensor that contains the power of your non-essential load 1 (W)
non_essential_load2:	Optional		Sensor that contains the power of your non-essential load 2 (W)
grid_ct_power_172:	Required	sensor.sunsynk_grid_ct_power	Grid CT Power (W)
pv1_voltage_109:	Optional	sensor.sunsynk_pv1_voltage	PV String 1 Voltage (V)
pv1_current_110:	Optional	sensor.sunsynk_pv1_current	PV String 1 Current (A)
pv2_voltage_111:	Optional	sensor.sunsynk_pv2_voltage	PV String 2 Voltage (V)
pv2_current_112:	Optional	sensor.sunsynk_pv2_current	PV String 2 Current (A)
pv3_voltage_113:	Optional	sensor.sunsynk_pv3_voltage	PV String 3 Voltage (V)
pv3_current_114:	Optional	sensor.sunsynk_pv3_current	PV String 3 Current (A)
pv4_voltage_115:	Optional	sensor.sunsynk_pv4_voltage	PV String 4 Voltage (V)
pv4_current_116:	Optional	sensor.sunsynk_pv4_current	PV String 4 Current (A)
grid_connected_status_194:	Optional	binary_sensor.sunsynk_grid_connected_status	Grid Connected Status on/off or 1/0
inverter_status_59:	Optional	sensor.sunsynk_overall_state	Inverter Status 0, 1, 2, 3, 4 or standby, selftest, normal, alarm, fault. When used with use_victron flag it changes to Victron status codes
aux_power_166:	Optional	sensor.sunsynk_aux_power	Auxilary Power (W)
aux_load1:	Optional		Sensor that contains the power of your AUX load 1 (W)
aux_load2:	Optional		Sensor that contains the power of your AUX load 2 (W)
aux_connected_status:	Optional	None	AUX Connected Status on/off, 1/0 or connected/disconnected
remaining_solar:	Optional	sensor.solcast_forecast_remaining_today	The remaining solar forecast for the day (kWh)
battery_temp_182:	Optional	sensor.sunsynk_battery_temperature	Battery Temperature (℃)
radiator_temp_91:	Optional	sensor.sunsynk_radiator_temperature	Inverter AC Temperature (℃)
dc_transformer_temp_90:	Optional	sensor.sunsynk_dc_transformer_temperature	Inverter DC Temperature (℃)
"	"	"	*When using Victron variables, this will display Min SOC in %
prog1_time:	Optional	sensor.sunsynk_time_slot_1	Program 1 start time (HH:MM)
prog1_capacity:	Optional	number.sunsynk_system_mode_soc_time1	Program 1 capacity (SOC) setting
prog1_charge:	Optional	switch.sunsynk_system_mode_grid_charge_time1	Program 1 charge options (on/off, 1/0, No Grid or Gen)
prog2_time:	Optional	sensor.sunsynk_time_slot_2	Program 2 start time (HH:MM)
prog2_capacity:	Optional	number.sunsynk_system_mode_soc_time2	Program 2 capacity (SOC) setting
prog2_charge:	Optional	switch.sunsynk_system_mode_grid_charge_time2	Program 2 charge options (on/off, 1/0, No Grid or Gen)
prog3_time:	Optional	sensor.sunsynk_time_slot_3	Program 3 start time (HH:MM)
prog3_capacity:	Optional	number.sunsynk_system_mode_soc_time3	Program 3 capacity (SOC) setting
prog3_charge:	Optional	switch.sunsynk_system_mode_grid_charge_time3	Program 3 charge options (on/off, 1/0, No Grid or Gen)
prog4_time:	Optional	sensor.sunsynk_time_slot_4	Program 4 start time (HH:MM)
prog4_capacity:	Optional	number.sunsynk_system_mode_soc_time4	Program 4 capacity (SOC) setting
prog4_charge:	Optional	switch.sunsynk_system_mode_grid_charge_time4	Program 4 charge options (on/off, 1/0, No Grid or Gen)
prog5_time:	Optional	sensor.sunsynk_time_slot_5	Program 5 start time (HH:MM)
prog5_capacity:	Optional	number.sunsynk_system_mode_soc_time5	Program 5 capacity (SOC) setting
prog5_charge:	Optional	switch.sunsynk_system_mode_grid_charge_time5	Program 5 charge options (on/off, 1/0, No Grid or Gen)
prog6_time:	Optional	sensor.sunsynk_time_slot_6	Program 6 start time (HH:MM)
prog6_capacity:	Optional	number.sunsynk_system_mode_soc_time6	Program 6 capacity (SOC) setting
prog6_charge:	Optional	switch.sunsynk_system_mode_grid_charge_time6	Program 6 charge options (on/off, 1/0, No Grid or Gen)
energy_cost:	Optional		Sensor that provides current energy cost per kWh
solar_sell_247:	Optional	switch.sunsynk_toggle_solar_sell	Displays icons to indicate if sell solar is active or not. The switch can be toggled by clicking on the icon (on/off, 1/0)

The card calculates the sensors below based on supplied attributes in the config so you dont need to define them in Home Assistant. NOTE if your essential and non-essential readings are innacurate replace sensor 169 with 167. Alternatively provide the card with sensors that calculate this data i.e essential_power: and nonessential_power:

totalsolar = pv1_power_186 + pv2_power_187 + pv3_power_188 + pv4_power_189
nonessential = grid_ct_power_172 - grid_power_169
essential = inverter_power_175 + grid_power_169 - aux_power_166

The modbus registers can be visualised on the full card below:

Example Card Configuration

Minimum Configuration (No Solar)

type: custom:sunsynk-power-flow-card-ve
cardstyle: full
show_solar: 'no'
battery:
  energy: 15960
  shutdown_soc: 20
entities:
  inverter_power_175: sensor.sunsynk_inverter_power
  grid_power_169: sensor.sunsynk_grid_power
  battery_soc_184: sensor.sunsynk_battery_soc
  battery_power_190: sensor.sunsynk_battery_power
  battery_current_191: sensor.sunsynk_battery_current
  grid_ct_power_172: sensor.sunsynk_grid_ct_power

Minimum Configuration (Solar)

type: custom:sunsynk-power-flow-card-ve
cardstyle: full
show_solar: 'yes'
solar:
  mppts: one
battery:
  energy: 15960
  shutdown_soc: 20
entities:
  inverter_power_175: sensor.sunsynk_inverter_power
  grid_power_169: sensor.sunsynk_grid_power
  battery_soc_184: sensor.sunsynk_battery_soc
  battery_power_190: sensor.sunsynk_battery_power
  battery_current_191: sensor.sunsynk_battery_current
  grid_ct_power_172: sensor.sunsynk_grid_ct_power
  pv1_power_186: sensor.sunsynk_pv1_power

Minimal Configuration (No Solar)

type: custom:sunsynk-power-flow-card-ve
cardstyle: full
show_solar: 'no'
battery:
  energy: 15960
  shutdown_soc: 20
entities:
  inverter_voltage_154: sensor.sunsynk_inverter_voltage
  load_frequency_192: sensor.sunsynk_load_frequency
  inverter_current_164: sensor.sunsynk_inverter_current
  inverter_power_175: sensor.sunsynk_inverter_power
  grid_power_169: sensor.sunsynk_grid_power
  battery_voltage_183: sensor.sunsynk_battery_voltage
  battery_soc_184: sensor.sunsynk_battery_soc
  battery_power_190: sensor.sunsynk_battery_power
  battery_current_191: sensor.sunsynk_battery_current
  grid_ct_power_172: sensor.sunsynk_grid_ct_power
  grid_connected_status_194: binary_sensor.sunsynk_grid_connected_status
  inverter_status_59: sensor.overall_state

Minimal Configuration (Solar)

type: custom:sunsynk-power-flow-card-ve
cardstyle: full
show_solar: 'yes'
solar:
  mppts: two
battery:
  energy: 15960
  shutdown_soc: 20
load:
  show_aux: 'no'
entities:
  inverter_voltage_154: sensor.sunsynk_inverter_voltage
  load_frequency_192: sensor.sunsynk_load_frequency
  inverter_current_164: sensor.sunsynk_inverter_current
  inverter_power_175: sensor.sunsynk_inverter_power
  grid_power_169: sensor.sunsynk_grid_power
  battery_voltage_183: sensor.sunsynk_battery_voltage
  battery_soc_184: sensor.sunsynk_battery_soc
  battery_power_190: sensor.sunsynk_battery_power
  battery_current_191: sensor.sunsynk_battery_current
  grid_ct_power_172: sensor.sunsynk_grid_ct_power
  grid_connected_status_194: binary_sensor.sunsynk_grid_connected_status
  inverter_status_59: sensor.sunsynk_overall_state
  pv1_power_186: sensor.sunsynk_pv1_power
  pv2_power_187: sensor.sunsynk_pv2_power
  pv1_voltage_109: sensor.sunsynk_pv1_voltage
  pv1_current_110: sensor.sunsynk_pv1_current
  pv2_voltage_111: sensor.sunsynk_pv2_voltage
  pv2_current_112: sensor.sunsynk_pv2_current

Minimal Configuration (Solar + Daily Totals)

type: custom:sunsynk-power-flow-card-ve
cardstyle: full
show_solar: 'yes'
solar:
  mppts: two
  show_daily: 'yes'
battery:
  energy: 15960
  shutdown_soc: 20
  show_daily: 'yes'
load:
  show_daily: 'yes'
grid:
  show_daily_buy: 'yes'
entities:
  inverter_voltage_154: sensor.sunsynk_inverter_voltage
  load_frequency_192: sensor.sunsynk_load_frequency
  inverter_current_164: sensor.sunsynk_inverter_current
  inverter_power_175: sensor.sunsynk_inverter_power
  grid_power_169: sensor.sunsynk_grid_power
  battery_voltage_183: sensor.sunsynk_battery_voltage
  battery_soc_184: sensor.sunsynk_battery_soc
  battery_power_190: sensor.sunsynk_battery_power
  battery_current_191: sensor.sunsynk_battery_current
  grid_ct_power_172: sensor.sunsynk_grid_ct_power
  grid_connected_status_194: binary_sensor.sunsynk_grid_connected_status
  inverter_status_59: sensor.sunsynk_overall_state
  pv1_power_186: sensor.sunsynk_pv1_power
  pv2_power_187: sensor.sunsynk_pv2_power
  pv1_voltage_109: sensor.sunsynk_pv1_voltage
  pv1_current_110: sensor.sunsynk_pv1_current
  pv2_voltage_111: sensor.sunsynk_pv2_voltage
  pv2_current_112: sensor.sunsynk_pv2_current
  day_pv_energy_108: sensor.sunsynk_day_pv_energy
  day_battery_charge_70: sensor.sunsynk_day_battery_charge
  day_battery_discharge_71: sensor.sunsynk_day_battery_discharge
  day_load_energy_84: sensor.sunsynk_day_load_energy
  day_grid_import_76: sensor.sunsynk_day_grid_import

Full Configuration (All Options)

type: custom:sunsynk-power-flow-card-ve
cardstyle: full
panel_mode: 'no'
large_font: 'no'
show_solar: 'yes'
temp_unit: 'C'
inverter:
  modern: 'yes'
  colour: grey
  autarky: 'power'
  use_victron: 'false'
  auto_scale: true
battery:
  energy: 15960
  shutdown_soc: 20
  invert_power: 'no'
  colour: pink
  show_daily: 'yes'
  animation_speed: 6
  max_power: 4500
  full_capacity: 80
  empty_capacity: 30
  warn_color: 'Red'
  tail_current: 2
  auto_scale: true
solar:
  colour: orange
  show_daily: 'yes'
  mppts: two
  animation_speed: 9
  max_power: 8000
  pv1_name: North
  pv2_name: North
  pv3_name: East
  pv4_name: West
  auto_scale: true
load:
  colour: '#5fb6ad'
  show_daily: 'yes'
  show_aux: 'yes'
  invert_aux: 'no'
  aux_name: Generator
  aux_type: gen
  aux_colour: green
  aux_off_colour: red
  aux_loads: two
  aux_load1_name: Aux load 1
  aux_load2_name: Aux load 2
  aux_load1_icon: mdi:air-filter
  aux_load2_icon: mdi:stove
  animation_speed: 8
  max_power: 8000
  additional_loads: two
  load1_name: Geyser
  load2_name: Pool
  load1_icon: boiler
  load2_icon: mdi:pool
  auto_scale: true
grid:
  colour: '#5490c2'
  show_daily_buy: 'yes'
  show_daily_sell: 'yes'
  no_grid_colour: '#a40013'
  show_nonessential: 'yes'
  invert_grid: 'no'
  nonessential_name: Non Essential
  nonessential_icon: oven
  additional_loads: two
  load1_name: Load 1
  load2_name: Load 2
  load1_icon: boiler
  load2_icon: mdi:ev-station
  animation_speed: 8
  max_power: 8000
  auto_scale: true
entities:
  use_timer_248: switch.sunsynk_toggle_system_timer
  priority_load_243: switch.sunsynk_toggle_priority_load
  day_battery_charge_70: sensor.sunsynk_day_battery_charge
  day_battery_discharge_71: sensor.sunsynk_day_battery_discharge
  day_load_energy_84: sensor.sunsynk_day_load_energy
  day_grid_import_76: sensor.sunsynk_day_grid_import
  day_grid_export_77: sensor.sunsynk_day_grid_export
  day_pv_energy_108: sensor.sunsynk_day_pv_energy
  inverter_voltage_154: sensor.sunsynk_inverter_voltage
  load_frequency_192: sensor.sunsynk_load_frequency
  inverter_current_164: sensor.sunsynk_inverter_current
  inverter_power_175: sensor.sunsynk_inverter_power
  grid_power_169: sensor.sunsynk_grid_power
  pv1_power_186: sensor.sunsynk_pv1_power
  pv2_power_187: sensor.sunsynk_pv2_power
  pv3_power_188: none
  pv4_power_189: none
  pv_total: sensor.sunsynk_totalsolar
  pv1_voltage_109: sensor.sunsynk_pv1_voltage
  pv1_current_110: sensor.sunsynk_pv1_current
  pv2_voltage_111: sensor.sunsynk_pv2_voltage
  pv2_current_112: sensor.sunsynk_pv2_current
  pv3_voltage_113: none
  pv3_current_114: none
  pv4_voltage_115: none
  pv4_current_116: none
  battery_voltage_183: sensor.sunsynk_battery_voltage
  battery_soc_184: sensor.sunsynk_battery_soc
  battery_power_190: sensor.sunsynk_battery_power
  battery_current_191: sensor.sunsynk_battery_current
  essential_power: none
  essential_load1: sensor.tuya_geyser_current_consumption
  essential_load2: sensor.load2_power
  nonessential_power: none
  non_essential_load1: sensor.nonessential1_power
  non_essential_load2: sensor.nonessential2_power
  grid_ct_power_172: sensor.sunsynk_grid_ct_power
  grid_connected_status_194: binary_sensor.sunsynk_grid_connected_status
  inverter_status_59: sensor.sunsynk_overall_state
  aux_power_166: sensor.sunsynk_aux_power
  aux_connected_status: binary_sensor.sunsynk_aux_connected_status
  aux_load1: sensor.aux1_power
  aux_load2: sensor.aux2_power
  remaining_solar: sensor.solcast_forecast_remaining_today
  battery_temp_182: sensor.sunsynk_battery_temperature
  radiator_temp_91: sensor.sunsynk_radiator_temperature
  dc_transformer_temp_90: sensor.sunsynk_dc_transformer_temperature
  prog1_time: sensor.sunsynk_time_slot_1
  prog1_capacity: number.sunsynk_system_mode_soc_time1
  prog1_charge: switch.sunsynk_system_mode_grid_charge_time1
  prog2_time: sensor.sunsynk_time_slot_2
  prog2_capacity: number.sunsynk_system_mode_soc_time2
  prog2_charge: switch.sunsynk_system_mode_grid_charge_time2
  prog3_time: sensor.sunsynk_time_slot_3
  prog3_capacity: number.sunsynk_system_mode_soc_time3
  prog3_charge: switch.sunsynk_system_mode_grid_charge_time3
  prog4_time: sensor.sunsynk_time_slot_4
  prog4_capacity: number.sunsynk_system_mode_soc_time4
  prog4_charge: switch.sunsynk_system_mode_grid_charge_time4
  prog5_time: sensor.sunsynk_time_slot_5
  prog5_capacity: number.sunsynk_system_mode_soc_time5
  prog5_charge: switch.sunsynk_system_mode_grid_charge_time5
  prog6_time: sensor.sunsynk_time_slot_6
  prog6_capacity: number.sunsynk_system_mode_soc_time6
  prog6_charge: switch.sunsynk_system_mode_grid_charge_time6
  energy_cost: sensor.tibber_energy_cost
  solar_sell_247: switch.sunsynk_toggle_solar_sell