sunxi: Enable a bunch of commands by default on sunxi

Recently a set of CONFIG_CMD_FOO defines was moved from being defined in config_distro_defaults to Kconfig, and added to all sunxi defconfigs to compensate. Instead of explictly selecting these in all sunxi defconfigs, simply always select these for sunxi boards. This makes the defconfigs simpler and ensures a consistent set of available commands across all sunxi boards. Signed-off-by: Hans de Goede <[email protected]>
ffontaine · May 25, 2016 · 0878a8a · 0878a8a
1 parent c1fd244
commit 0878a8a
Show file tree

Hide file tree

Showing 90 changed files with 17 additions and 943 deletions.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
@@ -538,14 +538,24 @@ config TARGET_CM_T43
 
 config ARCH_SUNXI
 	bool "Support sunxi (Allwinner) SoCs"
+	select CMD_BOOTZ
+	select CMD_DHCP
+	select CMD_EXT2
+	select CMD_EXT4
+	select CMD_FAT
+	select CMD_FS_GENERIC
 	select CMD_GPIO
+	select CMD_MII
+	select CMD_MMC if MMC
+	select CMD_PING
 	select CMD_USB
 	select DM
 	select DM_ETH
 	select DM_GPIO
 	select DM_KEYBOARD
 	select DM_SERIAL
 	select DM_USB
+	select HUSH_PARSER
 	select OF_BOARD_SETUP
 	select OF_CONTROL
 	select OF_SEPARATE

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
@@ -368,6 +368,7 @@ config I2C0_ENABLE
 	bool "Enable I2C/TWI controller 0"
 	default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	default n if MACH_SUN6I || MACH_SUN8I
+	select CMD_I2C
 	---help---
 	This allows enabling I2C/TWI controller 0 by muxing its pins, enabling
 	its clock and setting up the bus. This is especially useful on devices
@@ -377,19 +378,22 @@ config I2C0_ENABLE
 config I2C1_ENABLE
 	bool "Enable I2C/TWI controller 1"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 
 config I2C2_ENABLE
 	bool "Enable I2C/TWI controller 2"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 
 if MACH_SUN6I || MACH_SUN7I
 config I2C3_ENABLE
 	bool "Enable I2C/TWI controller 3"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 endif
@@ -399,6 +403,7 @@ config R_I2C_ENABLE
 	bool "Enable the PRCM I2C/TWI controller"
 	# This is used for the pmic on H3
 	default y if SY8106A_POWER
+	select CMD_I2C
 	---help---
 	Set this to y to enable the I2C controller which is part of the PRCM.
 endif
@@ -407,6 +412,7 @@ if MACH_SUN7I
 config I2C4_ENABLE
 	bool "Enable I2C/TWI controller 4"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 endif
@@ -535,6 +541,7 @@ config VIDEO_LCD_PANEL_I2C
 	bool "LCD panel needs to be configured via i2c"
 	depends on VIDEO
 	default n
+	select CMD_I2C
 	---help---
 	Say y here if the LCD panel needs to be configured via i2c. This
 	will add a bitbang i2c controller using gpios to talk to the LCD.

diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
@@ -9,20 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
@@ -10,19 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
@@ -14,19 +14,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_SUNXI_NO_PMIC=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
@@ -16,22 +16,11 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_AXP_ALDO3_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y

diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
@@ -9,20 +9,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800

diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
@@ -7,20 +7,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800

diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
@@ -10,19 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig
@@ -12,20 +12,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
@@ -14,18 +14,7 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
@@ -16,18 +16,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_USB_MUSB_HOST=y
diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig
@@ -8,19 +8,8 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
@@ -6,19 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_AXP152_POWER=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
@@ -8,20 +8,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
@@ -10,20 +10,9 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_I2C=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP_ALDO4_VOLT=2500

diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig
@@ -8,19 +8,9 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
-CONFIG_CMD_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_AXP_ALDO3_VOLT=3300
 CONFIG_AXP_ALDO4_VOLT=3300
 CONFIG_USB_MUSB_GADGET=y