This is a C++ embedded library for robotics base on STM32 and intended to provide GNU Makefiles.
- HandsFree Github
- HandsFree Website
- HandsFree Wiki , Old Version Wiki
- HandsFree baiduyun
- BUY Robot
- QQ Group: 521037187(Hands Free Community)
- Email: [email protected]
- ├── 0_Project ---- some demos base on this library
- │ ├── examples ---- stm32fxx examples project of openre
- │ ├── firmware ---- firmware projects of handsfree robots
- │ ├── etc..
- ├── 1_Processor --- the board-level abstraction layer , support handsfree countrol_unit_v1 , countrol_unit_v2, countrol_unit_mini , stm32f407_discovery
- │ ├── BoardAbstract
- │ ├── board.mk
- │ ├── Interrupt
- │ ├── STM32F1
- │ └── STM32F4
- │ ├── etc..
- ├── 2_Package ---- this dir include many tool packs . you can use it for moblile robotics, fly control etc..
- │ ├── common
- │ ├── hf_link
- │ ├── imu
- │ ├── motor
- │ ├── robot_abstract
- │ ├── robot_control
- │ ├── tf
- │ ├── etc..
- ├── 3_OS : OpenRE support RTOS(ucosII ucosIII nuttx), GUI(STEMWIN) , FATFS
- ├── 4_Thirdparty
- │ ├── Dobot
- │ ├── Eigen3 -│ ├── libs_include.h
- │ ├── Matrix
- │ └── thirdparty.mk
- ├── 5_Development_Toolchain
- ├── 6_Tools
- │ ├── env_config.sh
- │ ├── swd_upload.sh
- │ ├── tarall.sh
- │ └── tar.sh
- ├── 7_Documentation
- ├── clean_build_linux.sh
- ├── clean_build_win.bat
- ├── HANDS_FREE_OpenRE_F1.pro
- ├── HANDS_FREE_OpenRE_F4.pro
- └── README.md
- Download the latest openre code:
git clone https://github.com/HANDS-FREE/OpenRE
$ cd OpenRE & git clone [email protected]:HANDS-FREE/5_Development_Toolchain.git
$ cd 5_Development_Toolchain
$ sh auto_set_openre.sh
$ sudo apt-get install software-properties-common python-software-properties
$ sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded
$ sudo apt-get update
$ sudo apt-get install openocd gcc-arm-none-eabi
$ sudo usermod -a -G dialout $USER
$ sudo apt-get install lib32ncurses5 libtool libusb-1.0 libftdi-dev python python-serial python-empy libpython2.7:i386
$ sudo apt-get remove modemmanager
* Led toggle:
cd 0_Project/examples/handsfree_simple_app/linux
check the makefile config matching your main control board
make clean
make
make burn
cd 0_Project/firmware/handsfree_wheel_robot/linux
check the makefile config matching your main control board
make clean
make
make burn
Tips: Lots of examples are provided in folder 0_Project and you can get some manuals in folder 7_Documentation.
OpenRE Board is a motion controller developed according to the hardware standard of the HandsFree open source project. It is an important part of all HandsFree Robot platforms.It can be applied to the development of wheeled robots, humanoid robots, balance vehicles, and drones.More importantly, OpenRE Board is the official standard platform for the OpenRE(Open Source Robot Embedded Library).
We are now sharing two different performance openre boards : OpenRE Board Mini,OpenRE Board V2
OpenRE is licensed generally under a permissive 3-clause BSD license. Contributions are required to be made under the same license.
If you have any problem, or you have some suggestions for this code, please contact WenKe Ma by [email protected], thank you very much!