Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux…

…/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd"

 - one stm32f4 fix for a change that introduced the PLL_I2S and PLL_SAI
   boards

 - two Allwinner clk driver build fixes

 - two Allwinner CPU clk driver fixes where we see random CPUFreq
   crashes because the CPU's PLL locks up sometimes when we change the
   rate

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change
  clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks
  clk: sunxi-ng: fix build failure in ccu-sun9i-a80 driver
  clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER
  clk: stm32f4: fix: exclude values 0 and 1 for PLLQ

drivers/clk/clk-stm32f4.c

@@ -429,6 +429,13 @@ static const struct clk_div_table pll_divp_table[] = {
 	{ 0, 2 }, { 1, 4 }, { 2, 6 }, { 3, 8 }, { 0 }
 };
 
+static const struct clk_div_table pll_divq_table[] = {
+	{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 },
+	{ 8, 8 }, { 9, 9 }, { 10, 10 }, { 11, 11 }, { 12, 12 }, { 13, 13 },
+	{ 14, 14 }, { 15, 15 },
+	{ 0 }
+};
+
 static const struct clk_div_table pll_divr_table[] = {
 	{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 }, { 0 }
 };
@@ -496,9 +503,9 @@ struct stm32f4_div_data {
 
 #define MAX_PLL_DIV 3
 static const struct stm32f4_div_data  div_data[MAX_PLL_DIV] = {
-	{ 16, 2, 0,			pll_divp_table	},
-	{ 24, 4, CLK_DIVIDER_ONE_BASED, NULL		},
-	{ 28, 3, 0,			pll_divr_table	},
+	{ 16, 2, 0, pll_divp_table },
+	{ 24, 4, 0, pll_divq_table },
+	{ 28, 3, 0, pll_divr_table },
 };
 
 struct stm32f4_pll_data {

drivers/clk/sunxi-ng/Kconfig

@@ -1,6 +1,7 @@
 config SUNXI_CCU
 	bool "Clock support for Allwinner SoCs"
 	depends on ARCH_SUNXI || COMPILE_TEST
+	select RESET_CONTROLLER
 	default ARCH_SUNXI
 
 if SUNXI_CCU
@@ -135,6 +136,7 @@ config SUN8I_V3S_CCU
 config SUN9I_A80_CCU
 	bool "Support for the Allwinner A80 CCU"
 	select SUNXI_CCU_DIV
+	select SUNXI_CCU_MULT
 	select SUNXI_CCU_GATE
 	select SUNXI_CCU_NKMP
 	select SUNXI_CCU_NM

drivers/clk/sunxi-ng/ccu-sun8i-a33.c

@@ -752,6 +752,13 @@ static const struct sunxi_ccu_desc sun8i_a33_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun8i_a33_ccu_resets),
 };
 
+static struct ccu_pll_nb sun8i_a33_pll_cpu_nb = {
+	.common	= &pll_cpux_clk.common,
+	/* copy from pll_cpux_clk */
+	.enable	= BIT(31),
+	.lock	= BIT(28),
+};
+
 static struct ccu_mux_nb sun8i_a33_cpu_nb = {
 	.common		= &cpux_clk.common,
 	.cm		= &cpux_clk.mux,
@@ -783,6 +790,10 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node)
 
 	sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc);
 
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun8i_a33_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
 	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
 				  &sun8i_a33_cpu_nb);
 }

drivers/clk/sunxi-ng/ccu_common.c

@@ -14,11 +14,13 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/iopoll.h>
 #include <linux/slab.h>
 
 #include "ccu_common.h"
+#include "ccu_gate.h"
 #include "ccu_reset.h"
 
 static DEFINE_SPINLOCK(ccu_lock);
@@ -39,6 +41,53 @@ void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock)
 	WARN_ON(readl_relaxed_poll_timeout(addr, reg, reg & lock, 100, 70000));
 }
 
+/*
+ * This clock notifier is called when the frequency of a PLL clock is
+ * changed. In common PLL designs, changes to the dividers take effect
+ * almost immediately, while changes to the multipliers (implemented
+ * as dividers in the feedback loop) take a few cycles to work into
+ * the feedback loop for the PLL to stablize.
+ *
+ * Sometimes when the PLL clock rate is changed, the decrease in the
+ * divider is too much for the decrease in the multiplier to catch up.
+ * The PLL clock rate will spike, and in some cases, might lock up
+ * completely.
+ *
+ * This notifier callback will gate and then ungate the clock,
+ * effectively resetting it, so it proceeds to work. Care must be
+ * taken to reparent consumers to other temporary clocks during the
+ * rate change, and that this notifier callback must be the first
+ * to be registered.
+ */
+static int ccu_pll_notifier_cb(struct notifier_block *nb,
+			       unsigned long event, void *data)
+{
+	struct ccu_pll_nb *pll = to_ccu_pll_nb(nb);
+	int ret = 0;
+
+	if (event != POST_RATE_CHANGE)
+		goto out;
+
+	ccu_gate_helper_disable(pll->common, pll->enable);
+
+	ret = ccu_gate_helper_enable(pll->common, pll->enable);
+	if (ret)
+		goto out;
+
+	ccu_helper_wait_for_lock(pll->common, pll->lock);
+
+out:
+	return notifier_from_errno(ret);
+}
+
+int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb)
+{
+	pll_nb->clk_nb.notifier_call = ccu_pll_notifier_cb;
+
+	return clk_notifier_register(pll_nb->common->hw.clk,
+				     &pll_nb->clk_nb);
+}
+
 int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 		    const struct sunxi_ccu_desc *desc)
 {

drivers/clk/sunxi-ng/ccu_common.h

@@ -83,6 +83,18 @@ struct sunxi_ccu_desc {
 
 void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock);
 
+struct ccu_pll_nb {
+	struct notifier_block	clk_nb;
+	struct ccu_common	*common;
+
+	u32	enable;
+	u32	lock;
+};
+
+#define to_ccu_pll_nb(_nb) container_of(_nb, struct ccu_pll_nb, clk_nb)
+
+int ccu_pll_notifier_register(struct ccu_pll_nb *pll_nb);
+
 int sunxi_ccu_probe(struct device_node *node, void __iomem *reg,
 		    const struct sunxi_ccu_desc *desc);