Skip to content

Commit

Permalink
Sync patch r15338 from main trunk.
Browse files Browse the repository at this point in the history
Did proper error handling when SetVariable failed, and put RTC write operation at the behind of SetVariable, if SetVariable failed, RTC content could not be changed.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <[email protected]>

git-svn-id: https://svn.code.sf.net/p/edk2/code/branches/UDK2010.SR1@15348 6f19259b-4bc3-4df7-8a09-765794883524
  • Loading branch information
vanjeff authored and vanjeff committed Mar 20, 2014
1 parent 1c14667 commit 62ffd56
Showing 1 changed file with 51 additions and 33 deletions.
84 changes: 51 additions & 33 deletions PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
Original file line number Diff line number Diff line change
@@ -1,7 +1,7 @@
/** @file
RTC Architectural Protocol GUID as defined in DxeCis 0.96.
Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
Expand Down Expand Up @@ -392,6 +392,26 @@ PcRtcSetTime (
}
return Status;
}

//
// Write timezone and daylight to RTC variable
//
TimerVar = Time->Daylight;
TimerVar = (UINT32) ((TimerVar << 16) | (UINT16)(Time->TimeZone));
Status = EfiSetVariable (
L"RTC",
&gEfiCallerIdGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
sizeof (TimerVar),
&TimerVar
);
if (EFI_ERROR (Status)) {
if (!EfiAtRuntime ()) {
EfiReleaseLock (&Global->RtcLock);
}
return EFI_DEVICE_ERROR;
}

//
// Read Register B, and inhibit updates of the RTC
//
Expand Down Expand Up @@ -427,17 +447,6 @@ PcRtcSetTime (
Global->SavedTimeZone = Time->TimeZone;
Global->Daylight = Time->Daylight;

TimerVar = Time->Daylight;
TimerVar = (UINT32) ((TimerVar << 16) | (UINT16)(Time->TimeZone));
Status = EfiSetVariable (
L"RTC",
&gEfiCallerIdGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE,
sizeof (TimerVar),
&TimerVar
);
ASSERT_EFI_ERROR (Status);

return EFI_SUCCESS;
}

Expand Down Expand Up @@ -635,27 +644,13 @@ PcRtcSetWakeupTime (
return EFI_DEVICE_ERROR;
}
//
// Read Register B, and inhibit updates of the RTC
// Read Register B
//
RegisterB.Data = RtcRead (RTC_ADDRESS_REGISTER_B);

RegisterB.Bits.Set = 1;
RtcWrite (RTC_ADDRESS_REGISTER_B, RegisterB.Data);
RegisterB.Data = RtcRead (RTC_ADDRESS_REGISTER_B);

if (Enable) {
ConvertEfiTimeToRtcTime (&RtcTime, RegisterB, &Century);

//
// Set RTC alarm time
//
RtcWrite (RTC_ADDRESS_SECONDS_ALARM, RtcTime.Second);
RtcWrite (RTC_ADDRESS_MINUTES_ALARM, RtcTime.Minute);
RtcWrite (RTC_ADDRESS_HOURS_ALARM, RtcTime.Hour);

RegisterB.Bits.Aie = 1;

} else {
RegisterB.Bits.Aie = 0;
//
// if the alarm is disable, record the current setting.
//
Expand All @@ -668,11 +663,6 @@ PcRtcSetWakeupTime (
RtcTime.TimeZone = Global->SavedTimeZone;
RtcTime.Daylight = Global->Daylight;
}
//
// Allow updates of the RTC registers
//
RegisterB.Bits.Set = 0;
RtcWrite (RTC_ADDRESS_REGISTER_B, RegisterB.Data);

//
// Set the Y/M/D info to variable as it has no corresponding hw registers.
Expand All @@ -685,8 +675,36 @@ PcRtcSetWakeupTime (
&RtcTime
);
if (EFI_ERROR (Status)) {
if (!EfiAtRuntime ()) {
EfiReleaseLock (&Global->RtcLock);
}
return EFI_DEVICE_ERROR;
}

//
// Inhibit updates of the RTC
//
RegisterB.Bits.Set = 1;
RtcWrite (RTC_ADDRESS_REGISTER_B, RegisterB.Data);

if (Enable) {
//
// Set RTC alarm time
//
RtcWrite (RTC_ADDRESS_SECONDS_ALARM, RtcTime.Second);
RtcWrite (RTC_ADDRESS_MINUTES_ALARM, RtcTime.Minute);
RtcWrite (RTC_ADDRESS_HOURS_ALARM, RtcTime.Hour);

RegisterB.Bits.Aie = 1;

} else {
RegisterB.Bits.Aie = 0;
}
//
// Allow updates of the RTC registers
//
RegisterB.Bits.Set = 0;
RtcWrite (RTC_ADDRESS_REGISTER_B, RegisterB.Data);

//
// Release RTC Lock.
Expand Down

0 comments on commit 62ffd56

Please sign in to comment.