Requirements
System Requirements
1. x64 Linux Distribution. The application was tested and developed on ubuntu 14.0.4 and CentOS 7
2. At least 4 GB of RAM
3. Java 7 - available at https://jdk7.dev.java.net/
Optional Packages
NFS Kernel Server
LIO - for ISCSI support
Installation
Ubuntu/Debian (Ubuntu 13.10)
Step 1: Install Java JRE
sudo apt-get install openjdk-7-jre-headless
Step 2: Install SDFS File System
wget http://www.opendedup.org/downloads/sdfs-2.0.11_amd64.deb
sudo dpkg -i sdfs-2.0.11_amd64.deb
Step 3: Change the maximum number of open files allowed
sudo su
echo "* hardnofile 65535" >> /etc/security/limits.conf
echo "* soft nofile 65535" >> /etc/security/limits.conf
exit
Step 4: Log Out and Proceed to Initialization Instructions
CentOS/RedHat (Centos 6.5)
Step 1: Log in as root
Step 2: Install Java JRE
yum install java-1.7.0-openjdk
Step 3: Install the SDFS File System
wget http://www.opendedup.org/downloads/SDFS-2.0.11-2.x86_64.rpm
rpm -iv SDFS-2.0.11-2.x86_64.rpm
Step 4: Change the maximum number of open files allowed
echo "* hardnofile 65535" >> /etc/security/limits.conf
echo "* soft nofile 65535" >> /etc/security/limits.conf
exit
Step 5: Disable the IPTables firewall
service iptables save
service iptables stop
chkconfig iptables off
Step 4: Log Out and Proceed to Initialization Instructions
Fixed Block Deduplication
Step 1: Log into the linux system as root or use sudo
Step 2: Create the SDFS Volume. This will create a volume with 256 GB of capacity using a 4K block size.
sudo mkfs.sdfs --volume-name=pool0 --volume-capacity=256GB
Step 3: Create a mount point on the filesystem for the volume
sudo mkdir /media/pool0
Step 4: Mount the Volume
sudo mount.sdfs pool0 /media/pool0/ &
Step 5: Copy some data to the volume and make sure it all is there
md5sum /etc/sdfs/pool0-volume-cfg.xml
cp /etc/sdfs/pool0-volume-cfg.xml /media/pool0
md5sum /media/pool0/pool0-volume-cfg.xml
Step 6 (optional) : Unmount the volume
umount /media/pool0
Variable Block Deduplication
Step 1: Log into the linux system as root or use sudo
Step 2: Create the SDFS Volume. This will create a volume with 256 GB of capacity using a variable block size.
sudo mkfs.sdfs --volume-name=pool0 --volume-capacity=256GB --hash-type=VARIABLE_MURMUR3
Step 3: Create a mount point on the filesystem for the volume
sudo mkdir /media/pool0
Step 4: Mount the Volume
sudo mount.sdfs pool0 /media/pool0/ &
Step 5: Copy some data to the volume and make sure it all is there
md5sum /etc/sdfs/pool0-volume-cfg.xml
cp /etc/sdfs/pool0-volume-cfg.xml /media/pool0
md5sum /media/pool0/pool0-volume-cfg.xml
Step 6 (optional) : Unmount the volume
umount /media/pool0
Initialization Instructions for A Multi-Node Configuration
In a mult-node cluster there are two components :
The Dedup Storage Engine (DSE) - This is the server/service that store all unique blocks. For redundancy, you should have at least two of these. They can live on the same physical server as other components but this is not recommended for redundancy The File System Service (FSS) - This is the server/service that mounts the sdfs volume. Multiple FSS services each serving its own volume can live in the same cluster.
Prerequisits :
Static IP address and unique name for all nodes: All nodes should have a static IP address to reduce network issues. Disable host firewalls : IPTables should be disabled for testing and then enabled again if needed with open ports for multicast and udp. Network Communication : Multicast communication is the default configuration. All nodes in the cluster will need to be able to talk to eachother using multicast unless the Jgroups configuration is modified.Multicast communication is usually not a problem on the same subnet but can be an issue between subnets or over wans Fast Low Latency Network : SDFS will work within most networks but speed will suffer is network speeds low or network latency is high. 1Gb/s or above dedicated network is recommeded. Update your /etc/sysctl.conf to improve network IO performance. Below are some recommeded options : vm.swappiness=1 net.core.rmem_max=254800000 net.core.wmem_max=254800000 net.core.rmem_default=254800000 net.core.wmem_default=254800000 net.core.optmem_max=25480000 net.ipv4.tcp_timestamps=0 net.ipv4.tcp_sack=0 net.core.netdev_max_backlog=250000 net.ipv4.tcp_mem=25480000 25480000 25480000 net.ipv4.tcp_rmem=4096 87380 25480000 net.ipv4.tcp_wmem=4096 65536 25480000 net.ipv4.tcp_low_latency=1
Creating and Starting a DSE
The following steps will create 2 DSEs on server1 and server2
Step 1: Create a DSE on Server1 using a 4K block size and 200GB of capacity and cluster node id of "1"
mkdse --dse-name=sdfs --dse-capacity=200GB --cluster-node-id=1
Step 2: Edit the /etc/sdfs/jgroups.cfg.xml and add the bind_addr attribute with Server1's IP address to the <UDP> tag.
<UDP
mcast_port="${jgroups.udp.mcast_port:45588}"
tos="8"
ucast_recv_buf_size="5M"
ucast_send_buf_size="640K"
mcast_recv_buf_size="5M"
mcast_send_buf_size="640K"
loopback="true"
max_bundle_size="64K"
bind_addr="SERVER1 IP Address"
Step 3: Start the DSE service on Server1
startDSEService.sh -c /etc/sdfs/sdfs-dse-cfg.xml &
Step 4: Create a DSE on Server2 using a 4K block size and 200GB of capacity and cluster node id of "2"
mkdse --dse-name=sdfs --dse-capacity=200GB --cluster-node-id=2
Step 5: Edit the /etc/sdfs/jgroups.cfg.xml and add the bind_addr attribute with Server1's IP address to the <UDP> tag.
<UDP
mcast_port="${jgroups.udp.mcast_port:45588}"
tos="8"
ucast_recv_buf_size="5M"
ucast_send_buf_size="640K"
mcast_recv_buf_size="5M"
mcast_send_buf_size="640K"
loopback="true"
max_bundle_size="64K"
bind_addr="SERVER1 IP Address"
Step 6: Start the DSE service on Server1
startDSEService.sh -c /etc/sdfs/sdfs-dse-cfg.xml &
Creating and Starting a SDFS FSS - Mounting a Volume
The following steps will create 1 SDFS Volume on Server0. These are run as root.
Step 1: Create the volume configuration. The following will create a volume using 4K blocks. This must match the block size used by the DSEs
mkfs.sdfs --volume-name=pool0 --volume-capacity=400GB --chunk-store-local false
Step 2: Create a mount point on the filesystem for the volume
mkdir /media/pool0
Step 3: Mount the SDFS FSS (Volume)
mount.sdfs pool0 /media/pool0
Verify its all Working
Step 1: Make sure you can see all your DSE Servers from the FSS Node.
You will need to have a volume mounted to run sdfscli. SDFSCLI CAN ONLY BE RUN ON A SYSTEM WITH A MOUNTED VOLUME.
On the node that you mounted the volume run sdfscli --cluster-dse-info. You should see all the nodes in the cluster. If you don't then there is probably a networking issue somewhere that is preventing them from talking.
Step 2: Make sure you can see all of your other volumes in the cluster.
On any node that has a mounted volume run sdfscli --cluster-volumes. You should see all of the volumes in the cluster.
Step 3: Copy some data to the volume and make sure it all is there
md5sum /etc/sdfs/pool0-volume-cfg.xml
cp /etc/sdfs/pool0-volume-cfg.xml /media/pool0
md5sum /media/pool0/pool0-volume-cfg.xml
Step 4 (optional) : Unmount the volume
umount /media/pool0
Troubleshooting and other Notes
Running on a Multi-Node clusting on KVM guest.
By default KVM networking does not seem to allow guest to communicate over multicast. It also doesn't seem to work when bridging from a nic. From my reseach it looks like you have to setup a routed network from a KVM host and have all the guests on that shared network. In addition, you will want to enable multicast on the virtual nic that is shared by those guest. Here is is the udev code to make this happen. A reference to this issue is found here.
# cat /etc/udev/rules.d/61-virbr-querier.rules
ACTION=="add", SUBSYSTEM=="net", RUN+="/etc/sysconfig/network-scripts/vnet_querier_enable"
# cat /etc/sysconfig/network-scripts/vnet_querier_enable
#!/bin/sh
if [[ $INTERFACE == virbr* ]]; then
/bin/echo 1 > /sys/devices/virtual/net/$INTERFACE/bridge/multicast_querier
fi
Testing multicast support on nodes in the cluster
The jgroups protocol includes a nice tool to verify multicast is working on all nodes. Its an echo tool and sends messages from a sender to a reciever
On the receiver run
java -cp /usr/share/sdfs/lib/jgroups-3.4.1.Final.jar org.jgroups.tests.McastReceiverTest -mcast_addr 231.12.21.132 -port 45566
On the sender run
java -cp /usr/share/sdfs/lib/jgroups-3.4.1.Final.jar org.jgroups.tests.McastSenderTest -mcast_addr 231.12.21.132 -port 45566
Once you have both sides running type a message on the sender and you should see it on the receiver after you press enter. You may also want to switch rolls to make sure multicast works both directions.
take a look at http://docs.jboss.org/jbossas/docs/Clustering_Guide/4/html/ch07s07s11.html for more detail.
Further reading:
Take a look at the administration guide for more detail. http://www.opendedup.org/sdfs-20-administration-guide
Ask for Help
If you still need help check out the message board here https://groups.google.com/forum/#!forum/dedupfilesystem-sdfs-user-discuss