Skip to content

Releases: jmamma/MCL

MCL 4.60

11 Nov 03:53
@jmamma jmamma
4.60
53e4278
Compare
Choose a tag to compare
MCL 4.60 Latest
Latest

Firmware Upgrades

MCL version 4.60 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.11
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_6_0.hex) file containing the MCL OS has been provided below.

For MCL 4.20 and above, Hold down the < Page > button when powering-on to enter the boot menu and then select OS UPGRADE.
This will place the MegaCommand's USB chip in to Serial Mode such that in can receive the MCL OS update.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The legacy arduino IDE 1.8.x must be installed first: https://www.arduino.cc/en/software/OldSoftwareReleases)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200

Having trouble? Join the discord for live help: https://discord.gg/reFptpH6gp

Assets 9
Loading

MCL 4.51

19 Dec 00:36
@jmamma jmamma
4.51
d8eb49d
Compare
Choose a tag to compare
MCL 4.51

Firmware Upgrades

MCL version 4.51 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.10
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_5_1a.hex) file containing the MCL OS has been provided below.

For MCL 4.20 and above, Hold down the < Page > button when powering-on to enter the boot menu and then select OS UPGRADE.
This will place the MegaCommand's USB chip in to Serial Mode such that in can receive the MCL OS update.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The legacy arduino IDE 1.8.x must be installed first: https://www.arduino.cc/en/software/OldSoftwareReleases)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200

Having trouble? Join the discord for live help: https://discord.gg/reFptpH6gp

Assets 9
Loading

MCL 4.50

31 Jul 12:05
@jmamma jmamma
4.50
7852923
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.
Compare
Choose a tag to compare
MCL 4.50

Firmware Upgrades

MCL version 4.50 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.09
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_5_0.hex) file containing the MCL OS has been provided below.

For MCL 4.20 and above, Hold down the [ Page ] button when powering-on to enter the boot menu and then select OS UPGRADE.
This will place the MegaCommand's USB chip in to Serial Mode such that in can receive the MCL OS update.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The legacy arduino IDE 1.8.x must be installed first: https://www.arduino.cc/en/software/OldSoftwareReleases)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200

Having a problem upgrading? Join the discord for live help: https://discord.gg/KJHbAWdaY

Assets 9
Loading

MCL 4.43

18 Apr 03:07
@jmamma jmamma
4.43
02089af
Compare
Choose a tag to compare
MCL 4.43

Firmware Upgrades

MCL version 4.43 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.08
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_4_3.hex) file containing the MCL OS has been provided below.

For MCL 4.20 and above, Hold down the [ Page ] button when powering-on to enter the boot menu and then select OS UPGRADE.
This will place the MegaCommand's USB chip in to Serial Mode such that in can receive the MCL OS update.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The legacy arduino IDE 1.8.x must be installed first: https://www.arduino.cc/en/software/OldSoftwareReleases)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200

Having a problem upgrading? Join the discord for live help: https://discord.gg/fMvzE7j2

Assets 9
Loading

MCL 4.42

06 Apr 01:03
@jmamma jmamma
4.42
b6d00df
Compare
Choose a tag to compare
MCL 4.42

Firmware Upgrades

MCL version 4.42 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.08
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_4_2.hex) file containing the MCL OS has been provided below.

For MCL 4.20 and above, Hold down the [ Page ] button when powering-on to enter the boot menu and then select OS UPGRADE.
This will place the MegaCommand's USB chip in to Serial Mode such that in can receive the MCL OS update.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The legacy arduino IDE 1.8.x must be installed first: https://www.arduino.cc/en/software/OldSoftwareReleases)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200

Having a problem upgrading? Join the discord for live help: https://discord.gg/fMvzE7j2

Assets 9
Loading

MCL 4.41

10 Mar 05:33
@jmamma jmamma
4.41
a6f8b90
Compare
Choose a tag to compare
MCL 4.41

Firmware Upgrades

MCL version 4.41 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.08
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_4_1.hex) file containing the MCL OS has been provided below.

For MCL 4.20 and above, Hold down the [ Page ] button when powering-on to enter the boot menu and then select OS UPGRADE.
This will place the MegaCommand's USB chip in to Serial Mode such that in can receive the MCL OS update.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The legacy arduino IDE 1.8.x must be installed first: https://www.arduino.cc/en/software/OldSoftwareReleases)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200

Having a problem upgrading? Join the discord for live help: https://discord.gg/fMvzE7j2

Assets 9
Loading

MCL 4.40

28 Feb 03:21
@jmamma jmamma
4.40
64a93b1
Compare
Choose a tag to compare
MCL 4.40

Firmware Upgrades

MCL version 4.40 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.08
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_4_0.hex) file containing the MCL OS has been provided below.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The legacy arduino IDE 1.8.x must be installed first: https://www.arduino.cc/en/software/OldSoftwareReleases)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200

Having a problem upgrading? Join the discord for live help: https://discord.gg/fMvzE7j2

Assets 9
Loading

MCL 4.30

12 Jan 04:26
@jmamma jmamma
4.30
c3771c7
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.
Compare
Choose a tag to compare
MCL 4.30

Firmware Upgrades

MCL version 4.30 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.08
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_3_0.hex) file containing the MCL OS has been provided below.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The legacy arduino IDE 1.8.x must be installed first: https://www.arduino.cc/en/software/OldSoftwareReleases)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200
Assets 9
Loading

MCL 4.20

14 Jul 10:28
@jmamma jmamma
4.20
495c218
Compare
Choose a tag to compare
MCL 4.20

Firmware Upgrades

MCL version 4.20 requires that you upgrade:

  • MegaCommand USB Microcontroller Firmware to 1.04 to enable USB MIDI.
    Follow instructions in megacmd_usb_dfu_1.0.4.zip
  • Machinedrum OS to version X.07
  • Monomachine OS to version X.01A

Changes / Documentation:

Please See: Changelog

The MCL 4.20 User Documentation is available below.

MCL Upload instructions:

Binary (mcl_4_2_0.hex) file containing the MCL OS has been provided below.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The arduino IDE must be installed first: https://www.arduino.cc/en/main/software)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200
Assets 9
Loading

MCL 4.11

30 Mar 11:37
@jmamma jmamma
4.11
501fd0a
Compare
Choose a tag to compare
MCL 4.11

MCL version 4.11 requires that you upgrade your Machinedrum OS to version X.06

Changes / Documentation:

Please See: Changelog

The MCL 4.1 User Documentation is available below.

Upload instructions:

Binary (.hex) file containing the firmware has been provided below.

Windows

Windows users can use the included Xloader_MegaCommand_2022.zip program to upload the correct binary.

Select Device MegaCMD or MegaCommand depending on your hardware.

Mac

Mac users can use the Paul Kaplan's hex uploader tool HexUploader_2022.zip downloadable below.
(The arduino IDE must be installed first: https://www.arduino.cc/en/main/software)

HexUploader Settings:

For MegaCMD

  • Arduino Type: MegaCMD
  • SerialPort: The MegaCMD will usually show up as usbmodemXXX when connected.
  • Baud: 115200

For MegaCommand

  • Arduino Type: ATmega 2560
  • SerialPort: The MegaCommand will usually show up as usbmodemXXX when connected.
  • Baud: 115200
Assets 7
Loading