Merge tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.2-rc5 that
  resolve a number of tiny reported issues and some new device ids. They
  include:

   - new device id for the exar serial driver

   - speakup tty driver bugfix

   - atmel serial driver baudrate fixup

   - stm32 serial driver bugfix and then revert as the bugfix broke the
     build. That will come back in a later pull request once it is all
     worked out properly.

   - amba-pl011 serial driver rs486 mode bugfix

   - qcom_geni serial driver bugfix

  Most of these have been in linux-next with no reported problems (well,
  other than the build breakage which generated the revert), the new
  device id passed 0-day testing"

* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Add support for Sealevel 7xxxC serial cards
  Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
  tty: serial: qcom_geni: avoid duplicate struct member init
  serial: atmel: fix incorrect baudrate setup
  tty: fix possible null-ptr-defer in spk_ttyio_release
  serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
  serial: amba-pl011: fix high priority character transmission in rs486 mode
  serial: pch_uart: Pass correct sg to dma_unmap_sg()
  tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

drivers/accessibility/speakup/spk_ttyio.c

@@ -354,6 +354,9 @@ void spk_ttyio_release(struct spk_synth *in_synth)
 {
 	struct tty_struct *tty = in_synth->dev;
 
+	if (tty == NULL)
+		return;
+
 	tty_lock(tty);
 
 	if (tty->ops->close)

drivers/tty/serial/8250/8250_exar.c

@@ -43,6 +43,12 @@
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358
 
+#define PCI_DEVICE_ID_SEALEVEL_710xC		0x1001
+#define PCI_DEVICE_ID_SEALEVEL_720xC		0x1002
+#define PCI_DEVICE_ID_SEALEVEL_740xC		0x1004
+#define PCI_DEVICE_ID_SEALEVEL_780xC		0x1008
+#define PCI_DEVICE_ID_SEALEVEL_716xC		0x1010
+
 #define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
 #define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
@@ -638,6 +644,8 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 		nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
 	else if (board->num_ports)
 		nr_ports = board->num_ports;
+	else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL)
+		nr_ports = pcidev->device & 0xff;
 	else
 		nr_ports = pcidev->device & 0x0f;
 
@@ -864,6 +872,12 @@ static const struct pci_device_id exar_pci_tbl[] = {
 	EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8),
+
+	EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x),
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, exar_pci_tbl);

drivers/tty/serial/amba-pl011.c

@@ -1466,6 +1466,10 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
 	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count = uap->fifosize >> 1;
 
+	if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
+	    !uap->rs485_tx_started)
+		pl011_rs485_tx_start(uap);
+
 	if (uap->port.x_char) {
 		if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
 			return true;
@@ -1477,10 +1481,6 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
 		return false;
 	}
 
-	if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
-	    !uap->rs485_tx_started)
-		pl011_rs485_tx_start(uap);
-
 	/* If we are using DMA mode, try to send some characters. */
 	if (pl011_dma_tx_irq(uap))
 		return true;

drivers/tty/serial/atmel_serial.c

@@ -2657,13 +2657,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
 	else if (mr == ATMEL_US_PAR_ODD)
 		*parity = 'o';
 
-	/*
-	 * The serial core only rounds down when matching this to a
-	 * supported baud rate. Make sure we don't end up slightly
-	 * lower than one of those, as it would make us fall through
-	 * to a much lower baud rate than we really want.
-	 */
-	*baud = port->uartclk / (16 * (quot - 1));
+	*baud = port->uartclk / (16 * quot);
 }
 
 static int __init atmel_console_setup(struct console *co, char *options)

drivers/tty/serial/pch_uart.c

@@ -749,7 +749,7 @@ static void pch_dma_tx_complete(void *arg)
 		uart_xmit_advance(port, sg_dma_len(sg));
 
 	async_tx_ack(priv->desc_tx);
-	dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
+	dma_unmap_sg(port->dev, priv->sg_tx_p, priv->orig_nent, DMA_TO_DEVICE);
 	priv->tx_dma_use = 0;
 	priv->nent = 0;
 	priv->orig_nent = 0;

drivers/tty/serial/qcom_geni_serial.c

@@ -864,16 +864,27 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
 	return IRQ_HANDLED;
 }
 
-static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
+static int setup_fifos(struct qcom_geni_serial_port *port)
 {
 	struct uart_port *uport;
+	u32 old_rx_fifo_depth = port->rx_fifo_depth;
 
 	uport = &port->uport;
 	port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se);
 	port->tx_fifo_width = geni_se_get_tx_fifo_width(&port->se);
 	port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se);
 	uport->fifosize =
 		(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
+
+	if (port->rx_fifo && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
+		port->rx_fifo = devm_krealloc(uport->dev, port->rx_fifo,
+					      port->rx_fifo_depth * sizeof(u32),
+					      GFP_KERNEL);
+		if (!port->rx_fifo)
+			return -ENOMEM;
+	}
+
+	return 0;
 }
 
 
@@ -888,6 +899,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 	u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
 	u32 proto;
 	u32 pin_swap;
+	int ret;
 
 	proto = geni_se_read_proto(&port->se);
 	if (proto != GENI_SE_UART) {
@@ -897,7 +909,9 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 
 	qcom_geni_serial_stop_rx(uport);
 
-	get_tx_fifo_size(port);
+	ret = setup_fifos(port);
+	if (ret)
+		return ret;
 
 	writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
 
@@ -1516,7 +1530,7 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
+static int qcom_geni_serial_sys_suspend(struct device *dev)
 {
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
@@ -1533,7 +1547,7 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
 	return uart_suspend_port(private_data->drv, uport);
 }
 
-static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
+static int qcom_geni_serial_sys_resume(struct device *dev)
 {
 	int ret;
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
@@ -1581,10 +1595,12 @@ static int qcom_geni_serial_sys_hib_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend,
-					qcom_geni_serial_sys_resume)
-	.restore = qcom_geni_serial_sys_hib_resume,
-	.thaw = qcom_geni_serial_sys_hib_resume,
+	.suspend = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+	.resume = pm_sleep_ptr(qcom_geni_serial_sys_resume),
+	.freeze = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+	.poweroff = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+	.restore = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume),
+	.thaw = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume),
 };
 
 static const struct of_device_id qcom_geni_serial_match_table[] = {