Aqara Gateway/Hub (G2H, M1S CN, P3 CN, M2 CN, H1 CN, E1 CN, G3 CN, G2H Pro, M2 2022, M2 old EU/Global, M1S 2022, M3) integration for Home Assistant

Control Zigbee devices from Home Assistant with Aqara Gateway (KTBL12LM, ZHWG15LM, ZHWG12LM, ZNSXJ12LM, ZNSXJ12LM, ZNSXJ13LM, ZNSXJ15LM, ZHWG19LM, ZHWG20LM, ZHWG24LM). Gateway support Zigbee 3.

This integration was based on the development of @AlexxIT, Thanks Alex.

ATTENTION: The component only works on modified firmware (M2) or the gateway which was enabled telnet.

ATTENTION2: The Lumi company (Aqara manufacturer) started disable the post_init script. If you still want to use this component, please do not update to latest firmware of the gateway/hub. If you already updated to latest firmware and telnet is not working, you need switch to Mi Home mode and enable telnet by soft_hack method. Then flash modified firmware.

For Gateway M2 and Switch H1 Hub, to flash modified firmware to M2, please use AqaraGateway.exe to flash customize firmware. Need to open the case of gateway and wired out the UART of M2 or H1.

For Gateway M1S CN, AirCondition P3 CN, Hub E1 CN, Gateway M1S 2022 CN, please switch to Mi Home mode, and get the token.

Installation

you can install component with HACS, custom repo: HACS > Integrations > 3 dots (upper top corner) > Custom repositories > URL: niceboygithub/AqaraGateway > Category: Integration

Or Download and copy custom_components/aqara_gateway folder to custom_components folder in your HomeAssistant config folder

Configuration

⚙️ Configuration > 🧩 Integrations > ➕ Add Integration > 🔍 Search Aqara Gateway

Or click (HA v2021.3.0+):

If the integration didn't show up in the list please REFRESH the page
If the integration is still not in the list, you need to clear the browser cache.
Enter Gateway IP address.
If you applied a password of telnet in gateway, please enter the password. Otherwise, ignore this field.
Enter the xiaomi token of gateway if it is the first time to add integration. Otherwise, ignore this field.
Click Send button, then wait this integration is configured completely.
Done

More detail instructions from @InsaneWookie

Manually Enable Telnet

ATTENTION: There is a good news to enable telnet manually. The magic is "5 clicks, pause, 2 clicks, pause, 2 clicks, pause, 2 clicks, pause, 2 clicks, pause, 2 clicks, pause, 2 clicks, pause" from here. The Lumi removed the method "set_ip_info" in the new version of M1S "Mi version 4.0.3_0012, Aqara version 3.5.2_0010.0636" and other hubs also. If you were already upgrade to this verison, the only way to enabled customed firwmware by AqaraGateway.exe or use gw_global_tool to clean password and flash customed firmware.

You can use custom open telnet command way 2 or way 3 to enable telnet in Mija Home mode, then flash modification firmwares to M1S, P3, E1, if you want use them in Aqara Home. No need to open the case of gateway.

After telnet to gateway via putty, there are two methods (Flash or Not) to enable telnet and public mqtt.

Not Flash modified firmware method (NOT for G2H, E1 hub, G3, G2H Pro, M2 2022, M3)

mkdir /data/bin
cd /data/bin
wget -O /data/bin/curl "http://master.dl.sourceforge.net/project/mgl03/bin/curl?viasf=1"; chmod +x /data/bin/curl
/data/bin/curl -s -k -L -o /data/bin/mosquitto https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/binutils/mosquitto; chmod a+x /data/bin/mosquitto

mkdir /data/scripts
cd /data/scripts
/data/bin/curl -s -k -L -o /data/scripts/post_init.sh https://raw.githubusercontent.com/niceboygithub/AqaraM1SM2fw/main/binutils/post_init.sh
chmod +x /data/scripts/post_init.sh

Then restart gateway by reboot command.

Not Flash modified firmware method (for G2H)

mkdir /data/bin
cd /data/bin
wget -O /tmp/curl "http://master.dl.sourceforge.net/project/aqarahub/binutils/curl?viasf=1"; chmod +x /tmp/curl
/tmp/curl -s -k -L -o /data/bin/mosquitto https://raw.githubusercontent.com/niceboygithub/AqaraCameraHubfw/main/binutils/mosquitto; chmod a+x /data/bin/mosquitto

Not Flash modified firmware method (for G2H Pro)

mkdir /data/bin
cd /data/bin
wget -O /tmp/curl "http://master.dl.sourceforge.net/project/aqarahub/binutils/curl?viasf=1"; chmod +x /tmp/curl
/tmp/curl -s -k -L -o /data/bin/mosquitto https://raw.githubusercontent.com/niceboygithub/AqaraCameraHubfw/main/binutils/mosquitto_g2hpro; chmod a+x /data/bin/mosquitto

mkdir /data/scripts
cd /data/scripts
echo -e "#!/bin/sh\n\nfw_manager.sh -r\nfw_manager.sh -t -k" > /data/scripts/post_init.sh
chmod +x /data/scripts/post_init.sh
chattr +i /data/scripts; chattr +i /data/scripts/post_init.sh